Digital Output Module 6ES7132-6BH00-0BA0
تماس بگیرید
بررسی اجمالی محصول
*** Spare part *** SIMATIC ET 200SP, Digital Output Module , DQ 16x 24VDC/0.5A Standard, suitable for BU type A0, Color code CC00, module diagnostics
نقد و بررسی : Digital Output Module 6ES7132-6BH00-0BA0
Digital Output Module 6ES7132-6BH00-0BA0
*** Spare part *** SIMATIC ET 200SP, Digital Output Module , DQ 16x 24VDC/0.5A Standard, suitable for BU type A0, Color code CC00, module diagnostics
SIEMENS | |||
General information |
|||
Product type designation | DQ 16×24 VDC/0.5 A ST | ||
Firmware version
● FW update possible |
V1.0 | ||
Yes | |||
usable BaseUnits | BU type A0 | ||
Color code for module-specific color identification plate | CC00 | ||
Product function | |||
● I&M data | Yes; I&M0 to I&M3 | ||
Engineering with | |||
● STEP 7 TIA Portal configurable/integrated as of version | V11 SP2 / V13 | ||
● STEP 7 configurable/integrated as of version | V5.5 SP3 / –
|
||
● PCS 7 configurable/integrated as of version | |||
● PROFIBUS as of GSD version/GSD revision | |||
● PROFINET as of GSD version/GSD revision | GSDML V2.3 | ||
Operating mode | |||
● DQ | Yes | ||
● DQ with energy-saving function | No |
● PWM | No
No |
● Oversampling | |
● MSO | No |
Redundancy | |
● Redundancy capability | Yes |
Supply voltage | |
Rated value (DC) | 24 V |
permissible range, lower limit (DC) | 19.2 V |
permissible range, upper limit (DC) | 28.8 V |
Reverse polarity protection | Yes |
Input current |
|
Current consumption, max. | 60 mA; without load |
Output voltage | |
Rated value (DC) | 24 V |
Power loss | |
Power loss, typ. | 1 W |
Address area | |
Address space per module | |
● Address space per module, max. | 2 byte |
Hardware configuration | |
Automatic encoding | |
● Mechanical coding element | Yes |
Selection of BaseUnit for connection variants | |
● 1-wire connection | BU type A0 |
● 2-wire connection | BU type A0 + Potential isolation module |
● 3-wire connection | BU type A0 + Potential isolation module |
● 4-wire connection | BU type A0 + Potential isolation module |
Digital outputs | |
Type of digital output | Source output (PNP, current-sourcing) |
Number of digital outputs | 16 |
Current-sinking | No |
Current-sourcing | Yes |
Digital outputs, parameterizable | Yes |
Short-circuit protection | Yes |
● Response threshold, typ. | 0.7 to 1.3 A |
Limitation of inductive shutdown voltage to | Typ. L+ (-50 V) |
Controlling a digital input | Yes |
Switching capacity of the outputs |
|
● with resistive load, max. | 0.5 A |
● on lamp load, max. | 5 W |
Load resistance range | |
● lower limit | 48 Ω |
● upper limit | 12 kΩ |
Output current | |
● for signal “1” rated value | 0.5 A |
● for signal “0” residual current, max. | 0.1 mA |
Output delay with resistive load | |
● “0” to “1”, typ. | 50 µs |
● “1” to “0”, typ. | 100 µs |
Parallel switching of two outputs | |
● for uprating | No |
● for redundant control of a load | Yes |
Switching frequency | |
● with resistive load, max. | 100 Hz |
● with inductive load, max. | 2 Hz |
● on lamp load, max. | 10 Hz |
Total current of the outputs | |
● Current per channel, max. | 0.5 A |
● Current per module, max. | 8 A |
Total current of the outputs (per module) | |
horizontal installation | |
— up to 30 °C, max. | 8 A |
— up to 40 °C, max. | 8 A |
— up to 50 °C, max. | 6 A |
— up to 60 °C, max. | 4 A |
vertical installation | |
— up to 30 °C, max. | 8 A |
— up to 40 °C, max. | 6 A |
— up to 50 °C, max. | 4 A |
— up to 60 °C, max. | 4 A |
Cable length | |
● shielded, max. | 1 000 m |
● unshielded, max. | 600 m |
Isochronous mode | |
Isochronous operation (application synchronized up to terminal) | No |
Interrupts/diagnostics/status information | |
Diagnostics function | Yes |
Substitute values connectable | Yes |
Alarms | |
● Diagnostic alarm | Yes |
Diagnostic messages | |
● Monitoring the supply voltage | Yes |
● Wire-break | Yes; Module-wise |
● Short-circuit to M | Yes; Module-wise |
● Short-circuit to L+ | Yes; Module-wise |
● Group error | Yes |
Diagnostics indication LED |
|
● Monitoring of the supply voltage (PWR-LED) | Yes; Green PWR LED |
● Channel status display | Yes; Green LED |
● for channel diagnostics | No |
● for module diagnostics | Yes; green/red DIAG LED |
Potential separation | |
Potential separation channels | |
● between the channels | No |
● between the channels and backplane bus | Yes |
● between the channels and the power supply of the electronics | No |
Isolation | |
Isolation tested with | 707 V DC (type test) |
Standards, approvals, certificates | |
Suitable for safety functions | No |
Suitable for safety-related tripping of standard modules | Yes; From FS03 |
Highest safety class achievable in safety mode | |
● Performance level according to ISO 13849-1 | PL d |
● SIL acc. to IEC 61508 | SIL 2 |
Ambient conditions | |
Ambient temperature during operation | |
● horizontal installation, min. | 0 °C |
● horizontal installation, max. | 60 °C |
● vertical installation, min. | 0 °C; in all other mounting positions |
● vertical installation, max. | 50 °C; in all other mounting positions |
Altitude during operation relating to sea level | |
● Ambient air temperature-barometric pressurealtitude | On request: Negative ambient temperature down to -30 °C
(without condensation), installation altitudes between 2 000 m and 5 000 m |
Dimensions | |
Width | 15 mm |
Height | 73 mm |
Depth | 58 mm |
SIEMENS Digital Output Module 6ES7132-6BH00-0BA0 |
Be the first to review “Digital Output Module 6ES7132-6BH00-0BA0”
-
منبع تغذیه 24 ولت 3 آمپر
تماس بگیریدمنبع تغذیه 24 ولت 3 امپر (S-72-24) با توان خروجی 72 وات تحویلی به مصرف کننده اندازه گیری شده است. ولتاژ ورودی که در این منبع تغذیه قابل قبول است 220 ولت ac می باشد این دستگاه الکترونیک توانایی تبدیل ولتاژی به ولتاژ دیگری را دارد. -
منبع تغذیه 24 ولت 1.1 آمپر مین ول
0 تومانمنبع تغذیه 24 ولت 1.1 آمپر (RS-25-24) مین ول با توان و قدرت اندازه گیری شده در خروجی برابر 25.2 وات می باشد. منبع تغذیه سوئیچینگ 24 ولت مین ول سری RS-25 جزء محصولات کف خواب این شرکت است. راندمان در این منبع تغذیه 81.5% است که به خوبی پاسخگوی نیاز کاربر می باشد. تلفات در این منبع تغذیه کم بوده و در حالت بی باری به کمتر از 0.5… -
مبدل 12 به 12 ولت 4.2 آمپر مین ول
0 تومانمبدل 12 به 12 ولت 4.2 آمپر (SD-50A-12) مین ول با توان 50.4 وات واقعی در خروجی اندازه گیری شده است. این مبدل DC به DC جزء دسته منبع تغذیه های کف خواب شرکت مین ول می باشد. محافظت در برابر اتصال کوتاه، اضافه بار، ولتاژ بالا و درجه حرارت بالا از ویژگی های این کانورتر به شمار می رود. بازدهی (راندمان) این کانورتر به عدد بالای 72 درصد می… -
منبع تغذیه 12 ولت 20 آمپر
310,000 تومانمنبع تغذیه 12 ولت 20 امپر (S-240-12) با توان خروجی 240وات تحویلی به مصرف کننده اندازه گیری شده است. ولتاژ ورودی که در این منبع تغذیه قابل قبول است بین 110 ولت تا 220 ولت ac می باشد این دستگاه الکترونیک توانایی تبدیل ولتاژی به ولتاژ دیگری را دارد. -
منبع تغذیه 12 ولت 33 آمپر جم
525,000 تومانمنبع تغذیه 12 ولت 33 امپر جم با توان نامی 400 وات با بدنه بارونی برای نصب و استفاده در مکان های باز , تابلو برق های صنعتی مورد استفاده برای کاربری های صنعتی , روشنایی . دارای فن پر قدرت برای گردش هوا جهت بالا رفتن عمر قطعات الکترونیکی استفاده شده در این منبع تغذیه جم . نامی آشنا در صنعت روشنایی -
Digital Input Module 6ES7131-6BH00-0BA0
تماس بگیرید*** Spare part *** SIMATIC ET 200SP, digital input module, DI 16X 24 V DC Standard, suitable for BU type A0, color code CC00, module diagnostics
Reviews
There are no reviews yet.