Digital Output Module 6ES7132-6BH00-0BA0
تماس بگیرید
بررسی اجمالی محصول
*** Spare part *** SIMATIC ET 200SP, Digital Output Module , DQ 16x 24VDC/0.5A Standard, suitable for BU type A0, Color code CC00, module diagnostics
نقد و بررسی : Digital Output Module 6ES7132-6BH00-0BA0
Digital Output Module 6ES7132-6BH00-0BA0
*** Spare part *** SIMATIC ET 200SP, Digital Output Module , DQ 16x 24VDC/0.5A Standard, suitable for BU type A0, Color code CC00, module diagnostics
SIEMENS | |||
General information |
|||
Product type designation | DQ 16×24 VDC/0.5 A ST | ||
Firmware version
● FW update possible |
V1.0 | ||
Yes | |||
usable BaseUnits | BU type A0 | ||
Color code for module-specific color identification plate | CC00 | ||
Product function | |||
● I&M data | Yes; I&M0 to I&M3 | ||
Engineering with | |||
● STEP 7 TIA Portal configurable/integrated as of version | V11 SP2 / V13 | ||
● STEP 7 configurable/integrated as of version | V5.5 SP3 / –
|
||
● PCS 7 configurable/integrated as of version | |||
● PROFIBUS as of GSD version/GSD revision | |||
● PROFINET as of GSD version/GSD revision | GSDML V2.3 | ||
Operating mode | |||
● DQ | Yes | ||
● DQ with energy-saving function | No |
● PWM | No
No |
● Oversampling | |
● MSO | No |
Redundancy | |
● Redundancy capability | Yes |
Supply voltage | |
Rated value (DC) | 24 V |
permissible range, lower limit (DC) | 19.2 V |
permissible range, upper limit (DC) | 28.8 V |
Reverse polarity protection | Yes |
Input current |
|
Current consumption, max. | 60 mA; without load |
Output voltage | |
Rated value (DC) | 24 V |
Power loss | |
Power loss, typ. | 1 W |
Address area | |
Address space per module | |
● Address space per module, max. | 2 byte |
Hardware configuration | |
Automatic encoding | |
● Mechanical coding element | Yes |
Selection of BaseUnit for connection variants | |
● 1-wire connection | BU type A0 |
● 2-wire connection | BU type A0 + Potential isolation module |
● 3-wire connection | BU type A0 + Potential isolation module |
● 4-wire connection | BU type A0 + Potential isolation module |
Digital outputs | |
Type of digital output | Source output (PNP, current-sourcing) |
Number of digital outputs | 16 |
Current-sinking | No |
Current-sourcing | Yes |
Digital outputs, parameterizable | Yes |
Short-circuit protection | Yes |
● Response threshold, typ. | 0.7 to 1.3 A |
Limitation of inductive shutdown voltage to | Typ. L+ (-50 V) |
Controlling a digital input | Yes |
Switching capacity of the outputs |
|
● with resistive load, max. | 0.5 A |
● on lamp load, max. | 5 W |
Load resistance range | |
● lower limit | 48 Ω |
● upper limit | 12 kΩ |
Output current | |
● for signal “1” rated value | 0.5 A |
● for signal “0” residual current, max. | 0.1 mA |
Output delay with resistive load | |
● “0” to “1”, typ. | 50 µs |
● “1” to “0”, typ. | 100 µs |
Parallel switching of two outputs | |
● for uprating | No |
● for redundant control of a load | Yes |
Switching frequency | |
● with resistive load, max. | 100 Hz |
● with inductive load, max. | 2 Hz |
● on lamp load, max. | 10 Hz |
Total current of the outputs | |
● Current per channel, max. | 0.5 A |
● Current per module, max. | 8 A |
Total current of the outputs (per module) | |
horizontal installation | |
— up to 30 °C, max. | 8 A |
— up to 40 °C, max. | 8 A |
— up to 50 °C, max. | 6 A |
— up to 60 °C, max. | 4 A |
vertical installation | |
— up to 30 °C, max. | 8 A |
— up to 40 °C, max. | 6 A |
— up to 50 °C, max. | 4 A |
— up to 60 °C, max. | 4 A |
Cable length | |
● shielded, max. | 1 000 m |
● unshielded, max. | 600 m |
Isochronous mode | |
Isochronous operation (application synchronized up to terminal) | No |
Interrupts/diagnostics/status information | |
Diagnostics function | Yes |
Substitute values connectable | Yes |
Alarms | |
● Diagnostic alarm | Yes |
Diagnostic messages | |
● Monitoring the supply voltage | Yes |
● Wire-break | Yes; Module-wise |
● Short-circuit to M | Yes; Module-wise |
● Short-circuit to L+ | Yes; Module-wise |
● Group error | Yes |
Diagnostics indication LED |
|
● Monitoring of the supply voltage (PWR-LED) | Yes; Green PWR LED |
● Channel status display | Yes; Green LED |
● for channel diagnostics | No |
● for module diagnostics | Yes; green/red DIAG LED |
Potential separation | |
Potential separation channels | |
● between the channels | No |
● between the channels and backplane bus | Yes |
● between the channels and the power supply of the electronics | No |
Isolation | |
Isolation tested with | 707 V DC (type test) |
Standards, approvals, certificates | |
Suitable for safety functions | No |
Suitable for safety-related tripping of standard modules | Yes; From FS03 |
Highest safety class achievable in safety mode | |
● Performance level according to ISO 13849-1 | PL d |
● SIL acc. to IEC 61508 | SIL 2 |
Ambient conditions | |
Ambient temperature during operation | |
● horizontal installation, min. | 0 °C |
● horizontal installation, max. | 60 °C |
● vertical installation, min. | 0 °C; in all other mounting positions |
● vertical installation, max. | 50 °C; in all other mounting positions |
Altitude during operation relating to sea level | |
● Ambient air temperature-barometric pressurealtitude | On request: Negative ambient temperature down to -30 °C
(without condensation), installation altitudes between 2 000 m and 5 000 m |
Dimensions | |
Width | 15 mm |
Height | 73 mm |
Depth | 58 mm |
SIEMENS Digital Output Module 6ES7132-6BH00-0BA0 |
Be the first to review “Digital Output Module 6ES7132-6BH00-0BA0”
-
منبع تغذیه 12 ولت 37.5 آمپر مین ول
0 تومانمنبع تغذیه 12 ولت 37.5 آمپر مین ول (SE-450-12) با توان و قدرت 450 وات واقعی اندازه گیری شده است. این منبع تغذیه سوئیچینگ در دسته محصولات کف خواب این شرکت تایوانی قرار می گیرد. راندمان در این منبع تغذیه به عدد بالای 83% می رسد که به راحتی پاسخگوی نیاز کار می باشد. از ویژگی های حفاظتی در این منبع تغذیه می توان به حفاظت در برابر اتصال كوتاه،… -
منبع تغذیه دو خروجی مین ول
0 تومانمنبع تغذیه دو خروجی 5 ولت 6 آمپر مین ول با توان 54 وات در خروجی در اختیار کاربر قرار می گیرد. همچنین این منبع تغذیه دارای خروجی ثانویه ای با ولتاژ 12 ولت 2 امپر می باشد. راندمان یا بازدهی در این منبع تغذیه به عدد بالای 78 درصد می رسد. که بسیار کارآمد می باشد. سری RD-50 شامل دو دسته A و B می شود. سری A دارای… -
Push-in terminals 6ES7193-6BP00-0BA0
تماس بگیریدSIMATIC ET 200SP, BaseUnit BU15-P16+A0+2B, BU type A0, Push-in terminals, without AUX terminals, bridged to the left, WxH: 15x 117 mm -
ماژول UPS ریلی مین ول *جدید*
0 تومانماژول D-UPS40 جزء سری ماژول های ریلی مین ول محسوب می شود. دارای کنتاکت سیگنال رله ای با نشانگر LED و مناسب برای سییتم های 24 ولت تا مصرف جریان 40 آمپر . ماژول بدون فن ساخته شده و به وسیله ی انتقال حرارت از طریق هوا عمل خنک کننده گی صورت می گیرد -
شارژر 28.8 ولت 34.7 آمپر مین ول
0 تومانشارژر 28.8 ولت 34.7 آمپر مین ول با توان اندازه گیری شده 1000 وات در خروجی محاسبه شده است. این منبع تغذیه در دسته پاور های کف خواب شرکت مین ول قرار می گیرد. از جمله ویژگی های حفاظتی این محصول می توان به حفاظت در برابر اتصال کوتاه، اضافه جریان، اضافه ولتاژ، حفاظت از باتری و دمای بالا اشاره کرد. شارژر برای باتری های اسید سرب (سیل، ژل و… -
منبع تغذیه 5 ولت 3 آمپر مین ول
0 تومانمنبع تغذیه 5 ولت 3 آمپر مین ول با توان 30 وات واقعی و تحویلی به مصرف کننده ساخته شده است. این منبع تغذیه جزء محصولات ریلی شرکت مین ول محسوب می شود. پاور 5 ولت مین ول در دسته اقتصادی محصولات این شرکت تایوانی قرار می گیرد. راندمان این منبع تغذیه به عدد بالای 89% می رسد که در نوع خود بسیار خوب و کارآمد است. تلفات توان در…
Reviews
There are no reviews yet.