Digital Output Module 6ES7132-6BH00-0BA0

Digital Output Module 6ES7132-6BH00-0BA0


تماس بگیرید

دسته بندی : ,

آخرین بروزرسانی : ۱۰ مهر, ۱۳۹۹

بررسی اجمالی محصول

*** Spare part *** SIMATIC ET 200SP, Digital Output Module , DQ 16x 24VDC/0.5A Standard, suitable for BU type A0, Color code CC00, module diagnostics

جهت ارائه خدمات همکاری از قبیل تخفیف همکاری , لیست قیمت و…

خدمات همکاری آی سی اِس شاپـــــــ شامل تامین لوازم و تجهیزات صنعتی (برندهای مطرح دنیا) ، ارائه گارانتی و تعمیر فوری محصولات , مشاوره به همکاران گرامی , ارائه تخفیف همکاری و یا ارسال رایگان محصولات می باشد . (همکاری شمارتو وارد کن تا فرم ثبت نام برات ارسال بشه )

نقد و بررسی : Digital Output Module 6ES7132-6BH00-0BA0

Digital Output Module 6ES7132-6BH00-0BA0

*** Spare part *** SIMATIC ET 200SP, Digital Output Module , DQ 16x 24VDC/0.5A Standard, suitable for BU type A0, Color code CC00, module diagnostics

SIEMENS

General information

Product type designation DQ 16×24 VDC/0.5 A ST
Firmware version

● FW update possible

V1.0
Yes
usable BaseUnits BU type A0
Color code for module-specific color identification plate CC00
Product function
● I&M data Yes; I&M0 to I&M3
Engineering with
● STEP 7 TIA Portal configurable/integrated as of version V11 SP2 / V13
● STEP 7 configurable/integrated as of version V5.5 SP3 / –

V8.1 SP1
GSD Revision 5
● PCS 7 configurable/integrated as of version
● PROFIBUS as of GSD version/GSD revision
● PROFINET as of GSD version/GSD revision GSDML V2.3
Operating mode
● DQ Yes
● DQ with energy-saving function No
● PWM No

No

● Oversampling
● MSO No
Redundancy
● Redundancy capability Yes
Supply voltage
Rated value (DC) 24 V
permissible range, lower limit (DC) 19.2 V
permissible range, upper limit (DC) 28.8 V
Reverse polarity protection Yes

Input current

Current consumption, max. 60 mA; without load
Output voltage
Rated value (DC) 24 V
Power loss
Power loss, typ. 1 W
Address area
Address space per module
● Address space per module, max. 2 byte
Hardware configuration
Automatic encoding
● Mechanical coding element Yes
Selection of BaseUnit for connection variants
● 1-wire connection BU type A0
● 2-wire connection BU type A0 + Potential isolation module
● 3-wire connection BU type A0 + Potential isolation module
● 4-wire connection BU type A0 + Potential isolation module
Digital outputs
Type of digital output Source output (PNP, current-sourcing)
Number of digital outputs 16
Current-sinking No
Current-sourcing Yes
Digital outputs, parameterizable Yes
Short-circuit protection Yes
● Response threshold, typ. 0.7 to 1.3 A
Limitation of inductive shutdown voltage to Typ. L+ (-50 V)
Controlling a digital input Yes

Switching capacity of the outputs

● with resistive load, max. 0.5 A
● on lamp load, max. 5 W
Load resistance range
● lower limit 48 Ω
● upper limit 12 kΩ
Output current
● for signal “1” rated value 0.5 A
● for signal “0” residual current, max. 0.1 mA
Output delay with resistive load
● “0” to “1”, typ. 50 µs
● “1” to “0”, typ. 100 µs
Parallel switching of two outputs
● for uprating No
● for redundant control of a load Yes
Switching frequency
● with resistive load, max. 100 Hz
● with inductive load, max. 2 Hz
● on lamp load, max. 10 Hz
Total current of the outputs
● Current per channel, max. 0.5 A
● Current per module, max. 8 A
Total current of the outputs (per module)
horizontal installation
— up to 30 °C, max. 8 A
— up to 40 °C, max. 8 A
— up to 50 °C, max. 6 A
— up to 60 °C, max. 4 A
vertical installation
— up to 30 °C, max. 8 A
— up to 40 °C, max. 6 A
— up to 50 °C, max. 4 A
— up to 60 °C, max. 4 A
Cable length
● shielded, max. 1 000 m
● unshielded, max. 600 m
Isochronous mode
Isochronous operation (application synchronized up to terminal) No
Interrupts/diagnostics/status information
Diagnostics function Yes
Substitute values connectable Yes
Alarms
● Diagnostic alarm Yes
Diagnostic messages
● Monitoring the supply voltage Yes
● Wire-break Yes; Module-wise
● Short-circuit to M Yes; Module-wise
● Short-circuit to L+ Yes; Module-wise
● Group error Yes

Diagnostics indication LED

● Monitoring of the supply voltage (PWR-LED) Yes; Green PWR LED
● Channel status display Yes; Green LED
● for channel diagnostics No
● for module diagnostics Yes; green/red DIAG LED
Potential separation
Potential separation channels
● between the channels No
● between the channels and backplane bus Yes
● between the channels and the power supply of the electronics No
Isolation
Isolation tested with 707 V DC (type test)
Standards, approvals, certificates
Suitable for safety functions No
Suitable for safety-related tripping of standard modules Yes; From FS03
Highest safety class achievable in safety mode
● Performance level according to ISO 13849-1 PL d
● SIL acc. to IEC 61508 SIL 2
Ambient conditions
Ambient temperature during operation
● horizontal installation, min. 0 °C
● horizontal installation, max. 60 °C
● vertical installation, min. 0 °C; in all other mounting positions
● vertical installation, max. 50 °C; in all other mounting positions
Altitude during operation relating to sea level
● Ambient air temperature-barometric pressurealtitude On request: Negative ambient temperature down to -30 °C

(without condensation), installation altitudes between 2 000 m and 5 000 m

Dimensions
Width 15 mm
Height 73 mm
Depth 58 mm
SIEMENS Digital Output Module 6ES7132-6BH00-0BA0

Reviews

There are no reviews yet.

Be the first to review “Digital Output Module 6ES7132-6BH00-0BA0”

  • اینورتر 700 وات (مبدل DC به AC) مین ول TS-700اینورتر 700 وات (مبدل DC به AC) مین ول TS-700

    اینورتر 700 وات سینوسی مین ول

    تومان
    اینورتر (مبدل DC به AC) 220 ولت مین ول با توان 700 وات در خروجی اندازه گیری شده است. خروجی این اینورتر به صورت کاملا سینوسی و دقیق با ضریب خطا بسیار کم (THD < 0.3%) می باشد. توانایی تحمل سرج لحظه ای در این مبدل در زمان جریان کشی اولیه تا 1400 وات می رسد. همچنین راندمان در این مبدل DC به AC 700 وات به عدد بالای 91…
  • ماژول DR-RDN20

    تومان
    ماژول DR-RDN20 جزء سری ماژول های ریلی  مین ول محسوب می شود. مناسب برای استفاده دو منبع تغذیه به صورت همزمان دارای کنتاکت سیگنال رله ای با نشانگر LED . مورد استفاده برای سیستم های 24 ولت .استاندارد نصب بروی تابلوهای صنعتی ts35-7.5- 15 . ماژول بدون فن ساخته شده و به وسیله ی انتقال حرارت از طریق هوا عمل خنک کننده گی صورت می گیرد .
  • منبع تغذیه 24 ولت 2.5 آمپر مین ول

    تومان
    منبع تغذیه 24 ولت 2.5 آمپر مین ول در مجموع با 60 ولت واقعی در خروجی اندازه گیری شده است. سری MDR 60 در دسته محصولات ریلی شرکت مین ول قرار می گیرند.
  • اینورتر 400 وات (مبدل DC به AC) مین ول TS-400اینورتر 400 وات (مبدل DC به AC) مین ول TS-400

    اینورتر 400 وات سینوسی مین ول

    تومان
    اینورتر (مبدل DC به AC) 220 ولت مین ول با توان 400 وات در خروجی اندازه گیری شده است. خروجی این اینورتر به صورت کاملا سینوسی و دقیق با ضریب خطا بسیار کم (THD < 0.3%) می باشد. توانایی تحمل سرج لحظه ای در این مبدل در زمان جریان کشی اولیه تا 800 وات می رسد. همچنین راندمان در مبدل DC به AC 400 وات به عدد بالای 88.5 درصد…
  • پنل لمسی اچ ام ای وینتک hmi weintek MT8071iE

    پنل لمسی 7 اینچ WEINTEK HMI

    8,150,000 تومان
    پنل لمسی 7 اینچ وینتک با رزولوشن 800 * 480 ساخته شده است. HMI وینتک سری MT8071IE دارای صفحه نمایش از نوع TFT LCD همراه با نور پس زمینه LED می باشد. پردازنده به کار رفته در این پنل لمسی Cortex-A8 با فرکانس 600 مگا هرتز و از نوع 32 بیتی می باشد. حافظه رم (RAM) در این HMI ، 128 MB می باشد. همچنین حافظه فلش (FLASH) در این…
  • منبع تغذیه 48 ولت 21 آمپر مین ول (RSP-1000-48)منبع تغذیه 48 ولت 21 آمپر مین ول (RSP-1000-48)

    منبع تغذیه 48 ولت 21 آمپر مین ول

    تومان
    منبع تغذیه 48 ولت 21 آمپر مین ول (RSP-1000-48) با توان خروجی 1008 وات واقعی اندازه گیری شده است. این محصول مین ول از سری کف خواب این شرکت محسوب می شود. در این منبع تغذیه بازدهی فوق العاده بالا بوده و به 90% می رسد. سوئیچینگ 48 ولت 21 آمپر قابلیت پارالل (موازی سازی) 4 دستگاه با یک دیگر را دارد. ولتاژ خروجی در این منبع تغذیه از طریق…