Digital Output Module 6ES7132-6BH00-0BA0
تماس بگیرید
بررسی اجمالی محصول
*** Spare part *** SIMATIC ET 200SP, Digital Output Module , DQ 16x 24VDC/0.5A Standard, suitable for BU type A0, Color code CC00, module diagnostics
نقد و بررسی : Digital Output Module 6ES7132-6BH00-0BA0
Digital Output Module 6ES7132-6BH00-0BA0
*** Spare part *** SIMATIC ET 200SP, Digital Output Module , DQ 16x 24VDC/0.5A Standard, suitable for BU type A0, Color code CC00, module diagnostics
SIEMENS | |||
General information |
|||
Product type designation | DQ 16×24 VDC/0.5 A ST | ||
Firmware version
● FW update possible |
V1.0 | ||
Yes | |||
usable BaseUnits | BU type A0 | ||
Color code for module-specific color identification plate | CC00 | ||
Product function | |||
● I&M data | Yes; I&M0 to I&M3 | ||
Engineering with | |||
● STEP 7 TIA Portal configurable/integrated as of version | V11 SP2 / V13 | ||
● STEP 7 configurable/integrated as of version | V5.5 SP3 / –
|
||
● PCS 7 configurable/integrated as of version | |||
● PROFIBUS as of GSD version/GSD revision | |||
● PROFINET as of GSD version/GSD revision | GSDML V2.3 | ||
Operating mode | |||
● DQ | Yes | ||
● DQ with energy-saving function | No |
● PWM | No
No |
● Oversampling | |
● MSO | No |
Redundancy | |
● Redundancy capability | Yes |
Supply voltage | |
Rated value (DC) | 24 V |
permissible range, lower limit (DC) | 19.2 V |
permissible range, upper limit (DC) | 28.8 V |
Reverse polarity protection | Yes |
Input current |
|
Current consumption, max. | 60 mA; without load |
Output voltage | |
Rated value (DC) | 24 V |
Power loss | |
Power loss, typ. | 1 W |
Address area | |
Address space per module | |
● Address space per module, max. | 2 byte |
Hardware configuration | |
Automatic encoding | |
● Mechanical coding element | Yes |
Selection of BaseUnit for connection variants | |
● 1-wire connection | BU type A0 |
● 2-wire connection | BU type A0 + Potential isolation module |
● 3-wire connection | BU type A0 + Potential isolation module |
● 4-wire connection | BU type A0 + Potential isolation module |
Digital outputs | |
Type of digital output | Source output (PNP, current-sourcing) |
Number of digital outputs | 16 |
Current-sinking | No |
Current-sourcing | Yes |
Digital outputs, parameterizable | Yes |
Short-circuit protection | Yes |
● Response threshold, typ. | 0.7 to 1.3 A |
Limitation of inductive shutdown voltage to | Typ. L+ (-50 V) |
Controlling a digital input | Yes |
Switching capacity of the outputs |
|
● with resistive load, max. | 0.5 A |
● on lamp load, max. | 5 W |
Load resistance range | |
● lower limit | 48 Ω |
● upper limit | 12 kΩ |
Output current | |
● for signal “1” rated value | 0.5 A |
● for signal “0” residual current, max. | 0.1 mA |
Output delay with resistive load | |
● “0” to “1”, typ. | 50 µs |
● “1” to “0”, typ. | 100 µs |
Parallel switching of two outputs | |
● for uprating | No |
● for redundant control of a load | Yes |
Switching frequency | |
● with resistive load, max. | 100 Hz |
● with inductive load, max. | 2 Hz |
● on lamp load, max. | 10 Hz |
Total current of the outputs | |
● Current per channel, max. | 0.5 A |
● Current per module, max. | 8 A |
Total current of the outputs (per module) | |
horizontal installation | |
— up to 30 °C, max. | 8 A |
— up to 40 °C, max. | 8 A |
— up to 50 °C, max. | 6 A |
— up to 60 °C, max. | 4 A |
vertical installation | |
— up to 30 °C, max. | 8 A |
— up to 40 °C, max. | 6 A |
— up to 50 °C, max. | 4 A |
— up to 60 °C, max. | 4 A |
Cable length | |
● shielded, max. | 1 000 m |
● unshielded, max. | 600 m |
Isochronous mode | |
Isochronous operation (application synchronized up to terminal) | No |
Interrupts/diagnostics/status information | |
Diagnostics function | Yes |
Substitute values connectable | Yes |
Alarms | |
● Diagnostic alarm | Yes |
Diagnostic messages | |
● Monitoring the supply voltage | Yes |
● Wire-break | Yes; Module-wise |
● Short-circuit to M | Yes; Module-wise |
● Short-circuit to L+ | Yes; Module-wise |
● Group error | Yes |
Diagnostics indication LED |
|
● Monitoring of the supply voltage (PWR-LED) | Yes; Green PWR LED |
● Channel status display | Yes; Green LED |
● for channel diagnostics | No |
● for module diagnostics | Yes; green/red DIAG LED |
Potential separation | |
Potential separation channels | |
● between the channels | No |
● between the channels and backplane bus | Yes |
● between the channels and the power supply of the electronics | No |
Isolation | |
Isolation tested with | 707 V DC (type test) |
Standards, approvals, certificates | |
Suitable for safety functions | No |
Suitable for safety-related tripping of standard modules | Yes; From FS03 |
Highest safety class achievable in safety mode | |
● Performance level according to ISO 13849-1 | PL d |
● SIL acc. to IEC 61508 | SIL 2 |
Ambient conditions | |
Ambient temperature during operation | |
● horizontal installation, min. | 0 °C |
● horizontal installation, max. | 60 °C |
● vertical installation, min. | 0 °C; in all other mounting positions |
● vertical installation, max. | 50 °C; in all other mounting positions |
Altitude during operation relating to sea level | |
● Ambient air temperature-barometric pressurealtitude | On request: Negative ambient temperature down to -30 °C
(without condensation), installation altitudes between 2 000 m and 5 000 m |
Dimensions | |
Width | 15 mm |
Height | 73 mm |
Depth | 58 mm |
SIEMENS Digital Output Module 6ES7132-6BH00-0BA0 |
Be the first to review “Digital Output Module 6ES7132-6BH00-0BA0”
-
منبع تغذیه 24 ولت 4 آمپر ریلی
800,000 تومانمنبع تغذیه 24 ولت 4 آمپر وی وی ( mdr-100 ) با توان و قدرت 100 وات می باشد .سوئیچینگ سری MDR - 100 جزء محصولات ریلی این شرکت به حساب می آیند.سری MDR – 100 قابلیت نصب بر روی ریل های استاندارد TS-35 / 7.5 یا TS-35 / 15 دارد.جنس بدنه این منبع تغذیه از پلاستیک مرغوبی سخته شده است و توانایی تحمل محیط های سخت و صنعتی را… -
منبع تغذیه 24 ولت 10 آمپر ریلی
1,500,000 تومانمنبع تغذیه 24 ولت 10 آمپر وی وی ( dr-240-24 ) با توان 240 وات می باشد.این پاور در دسته ی منبع تغذیه های ریلی این شرکت قرار می گیرد.این سوئیچینگ با بدنه ای از جنس گالوانیزه و طراحی مشبکی ساخته شده است.بدنه این منبع تغذیه از مقاومت بالایی در محیط های صنعتی و سخت برخوردار است.این منبع تغذیه بدون فن DC ساخته شده است -
سنسور القایی OMRON E2B-M12KS04-WP-C1 امرن
تماس بگیرید◀️ نوع محصول : سنسور امرن / القایی / مجاورتی ◀️ قطر سنسور : استوانه ای قطر 12 ◀️ خروجی سنسور : NPN NO -
اینورتر 400 وات سینوسی مین ول
0 توماناینورتر (مبدل DC به AC) 220 ولت مین ول با توان 400 وات در خروجی اندازه گیری شده است. خروجی این اینورتر به صورت کاملا سینوسی و دقیق با ضریب خطا بسیار کم (THD < 0.3%) می باشد. توانایی تحمل سرج لحظه ای در این مبدل در زمان جریان کشی اولیه تا 800 وات می رسد. همچنین راندمان در مبدل DC به AC 400 وات به عدد بالای 88.5 درصد… -
اینورتر 2.2 کیلووات تک فاز دانفوس Danfoss
تماس بگیریداینورتر 2.2کیلووات دانفوس ، درایوی چند منظوره است که در حال حاضر تا توان 22 کیلووات تولید می شود و علی رغم جثه کوچک، دارای قابلیت های بسیار زیادی می باشد. پانل کنترلی این سری را می توان مستقیما روی درایو نصب کرد یا از طریق یک کابل مخصوص در جایی دیگر نصب نمود. همچنین با استفاده از این پانل می توان برنامه یک درایو را در درایو دیگر کپی… -
منبع تغذیه 48 ولت 2.5 آمپر مین ول
0 تومانمنبع تغذیه 48 ولت 2.5 آمپر مین ول (EDR 120 48) با توان و قدرت واقعی اندازه گیری شده 120 وات می باشد. این سری جزء محصولات ریلی این شرکت محسوب می شود. این منبع تغذیه بر روی ریل های استاندار TS-35 / 7.5 یا TS-35 / 15 قرار می گیرد.
Reviews
There are no reviews yet.