نقد و بررسی : Digital Input Module 6ES7131-6BH00-0BA0
Digital Input Module 6ES7131-6BH00-0BA0 SIEMENS
*** Spare part *** SIMATIC ET 200SP SIEMENS , digital input module, DI 16X 24 V DC Standard, suitable for BU type A0, color code CC00, module diagnostics
SIEMENS | |||
General information |
|||
Product type designation | DI 16×24 VDC ST | ||
Firmware version
● FW update possible |
V1.1 | ||
Yes | |||
usable BaseUnits | BU type A0 | ||
Color code for module-specific color identification plate | CC00 | ||
Product function | |||
● I&M data | Yes; I&M0 to I&M3 | ||
Engineering with | |||
● STEP 7 TIA Portal configurable/integrated as of version | V13 SP1 | ||
● STEP 7 configurable/integrated as of version | V5.5 / –
|
||
● PCS 7 configurable/integrated as of version | |||
● PROFIBUS as of GSD version/GSD revision | |||
● PROFINET as of GSD version/GSD revision | GSDML V2.3 | ||
Operating mode | |||
● DI | Yes | ||
● Counter | No |
● Oversampling | No
No |
● MSI | |
Supply voltage | |
Rated value (DC) | 24 V |
permissible range, lower limit (DC) | 19.2 V |
permissible range, upper limit (DC) | 28.8 V |
Reverse polarity protection | Yes |
Input current | |
Current consumption, max. | 90 mA |
Encoder supply | |
Short-circuit protection | No |
24 V encoder supply | |
● 24 V | No |
● Short-circuit protection | No |
Power loss | |
Power loss, typ. | 1.7 W |
Address area | |
Address space per module | |
● Address space per module, max. | 2 byte; + 2 bytes for QI information |
Hardware configuration | |
Automatic encoding | |
● Mechanical coding element | Yes |
Selection of BaseUnit for connection variants | |
● 1-wire connection | BU type A0 |
● 2-wire connection | BU type A0 + external terminals |
● 3-wire connection | BU type A0 + external terminals |
● 4-wire connection | BU type A0 + external terminals |
Digital inputs |
|
Number of digital inputs | 16 |
Source/sink input | P-reading |
Input characteristic curve in accordance with IEC 61131, type 1 | Yes |
Input characteristic curve in accordance with IEC 61131, type 2 | No |
Input characteristic curve in accordance with IEC 61131, type 3 | Yes |
Pulse extension | No |
Input voltage | |
● Rated value (DC) | 24 V |
● for signal “0” | -30 to +5 V |
● for signal “1” | +11 to +30V |
Input current | |
● for signal “1”, typ. | 2.5 mA |
Input delay (for rated value of input voltage) | |
for standard inputs | |
— parameterizable | Yes; 0.05 / 0.1 / 0.4 / 0.8 / 1.6 / 3.2 / 12.8 / 20 ms (in each case + delay of 30 to 500 µs, depending on line length) |
— at “0” to “1”, min. | 0.05 ms |
— at “0” to “1”, max. | 20 ms |
— at “1” to “0”, min. | 0.05 ms |
— at “1” to “0”, max. | 20 ms |
for interrupt inputs | |
— parameterizable | No |
for technological functions | |
— parameterizable | No |
Cable length | |
● shielded, max. | 1 000 m |
● unshielded, max. | 600 m |
Encoder |
|
Connectable encoders | |
● 2-wire sensor | Yes |
— permissible quiescent current (2-wire sensor), max. | 1.5 mA |
Isochronous mode | |
Isochronous operation (application synchronized up to terminal) | No |
Interrupts/diagnostics/status information | |
Diagnostics function | Yes |
Alarms | |
● Diagnostic alarm | Yes |
Diagnostic messages | |
● Diagnostic information readable | Yes |
● Monitoring the supply voltage | Yes |
— parameterizable | Yes |
● Monitoring of encoder power supply | No |
● Wire-break | Yes; Module-by-module, optional protective circuit for preventing wire-break diagnostics in the case of simple encoder contacts: 25 kOhm to 45 kOhm |
● Short-circuit | No |
● Group error | Yes |
Diagnostics indication LED |
Be the first to review “Digital Input Module 6ES7131-6BH00-0BA0”
-
منبع تغذیه و شارژر 24 ولت 5.8 آمپر مین ول
0 تومانمنبع تغذیه و شارژر 24 ولت 5.8 آمپر مین ول با توان اندازه گیری شده 160 وات در خروجی محاسبه شده است. این محصول در زمان اتصال باتری در کانال اول خروجی جریان معادل 3.8 آمپر و در کانال دوم معادل 2 آمپر می باشد. منبع تغذیه PSC-160 با قابلیت UPS از سری منبع تغذیه های سری SECURITY می باشد. همچنین تجهیز مدار ورودی به اصلاح ضریب قدرت ACTIVE PFC،… -
منبع تغذیه و شارژر 24 ولت 5.5 آمپر مین ول
0 تومانمنبع تغذیه و شارژر 24 ولت 5.5 آمپر مین ول با توان اندازه گیری شده 151.5 وات در خروجی محاسبه شده است. این محصول در زمان اتصال باتری در کانال اول خروجی جریان معادل 5 آمپر و در کانال دوم معادل 0.5 آمپر می باشد. منبع تغذیه AD-155 با قابلیت UPS از سری منبع تغذیه های مین ول می باشد. راندمان در این شارژر به 84% می رسد که به… -
منبع تغذیه 12 ولت 33 آمپر جم
525,000 تومانمنبع تغذیه 12 ولت 33 امپر جم با توان نامی 400 وات با بدنه بارونی برای نصب و استفاده در مکان های باز , تابلو برق های صنعتی مورد استفاده برای کاربری های صنعتی , روشنایی . دارای فن پر قدرت برای گردش هوا جهت بالا رفتن عمر قطعات الکترونیکی استفاده شده در این منبع تغذیه جم . نامی آشنا در صنعت روشنایی -
-
منبع تغذیه دو خروجی مین ول
0 تومانمنبع تغذیه دو خروجی 5 ولت 6 آمپر مین ول با توان 54 وات در خروجی در اختیار کاربر قرار می گیرد. همچنین این منبع تغذیه دارای خروجی ثانویه ای با ولتاژ 12 ولت 2 امپر می باشد. راندمان یا بازدهی در این منبع تغذیه به عدد بالای 78 درصد می رسد. که بسیار کارآمد می باشد. سری RD-50 شامل دو دسته A و B می شود. سری A دارای… -
مبدل 24 به 24 ولت 2.1 آمپر مین ول
0 تومانمبدل 24 به 24 ولت 2.1 آمپر مین ول (SD-50B-24) با توان 50.4 وات واقعی اندازه گیری و تحویل مصرف کننده قرار می گیرد. این منبع تغذیه DC به DC در دسته محصولات کف خواب شرکت مین ول قرار می گیرد. راندمان کاری در این مبدل DC به DC به 80 درصد می رسد که عدد بالا و قابل قبولی می باشد. محافظت در برابر اتصال کوتاه، اضافه بار، ولتاژ…
Reviews
There are no reviews yet.