نقد و بررسی : Push-in terminals 6ES7193-6BP00-0DA1
Push-in terminals 6ES7193-6BP00-0DA1
SIMATIC SIEMENS ET 200SP, BaseUnit BU15-P16+A0+2D/T, BU type A1, Push-in terminals 6ES7193-6BP00-0DA1 , without AUX terminals, New load group, WxH: 15x 117 mm, with temperature acquisition. SIEMENS
General information | |
Product type designation | BU type A1 |
HW functional status | FS10 and higher |
Supply voltage | |
Rated value (DC) | 24 V |
external protection for power supply lines | Yes; 24 V DC/10 A miniature circuit breaker with type B or C tripping characteristic |
Current carrying capacity | |
For P1 and P2 bus, max. | 10 A |
For process terminals, max. | 2 A |
Hardware configuration | |
Temperature sensor | Yes |
Formation of potential groups | |
● New potential group | Yes |
● Potential group continued from the left | No |
Potential separation | |
between the potential groups | Yes |
Isolation | |
Isolation tested with | 707 V DC (type test) |
Ambient conditions | |
Ambient temperature during operation | |
● horizontal installation, min. | -30 °C |
● horizontal installation, max. | 60 °C |
● vertical installation, min. | -30 °C |
● vertical installation, max. | 50 °C |
Altitude during operation relating to sea level | |
● Installation altitude above sea level, max. | 5 000 m; Restrictions for installation altitudes > 2 000 m, see manual |
Accessories | |
Color coding labels | |
● for process terminals | CC00 to CC09 |
● for AUX terminals | does not exist |
● for add-on terminals | does not exist |
Connection method | |
Terminals | |
● Terminal type | Push-in terminal |
● Conductor cross-section, min. 26 | 0.14 mm²; AWG |
● Conductor cross-section, max. 14 | 2.5 mm²; AWG |
● Number of process terminals to I/O module | 16 |
● Number of terminals to AUX bus | 0 |
● Number of add-on terminals | 0 |
● Number of terminals with connection to P1 and P2 bus | 2 |
Dimensions | |
Width | 15 mm |
Height | 117 mm |
Depth | 35 mm |
Weights | |
Weight, approx. | 40 g |
Be the first to review “Push-in terminals 6ES7193-6BP00-0DA1”
-
درایو 11 کیلووات کلوز 50آمپر کیوما QMA Q1200N
18,090,000 توماناینورتر های شرکت QMA Electronics چین بر اساس موتور های گیربکسی طراحی شده و به صورت تخصصی بر روی آسانسور و بالابر پیاده سازی شده است .درایو کنترل دور موتور آسانسور qma کیوما چین که در صنعت آسانسور ایران نام شناخته شده ای می باشد. در انواع مختلف OPEN و CLOSE طراحی و ساخته شده است -
منبع تغذیه 5 ولت 18 آمپر مین ول
0 تومانمنبع تغذیه 5 ولت 18 آمپر مین ول ( LRS-100-5 ) با توان اندازه گیری شدهً 102 وات در خروجی محاسبه شده است. این منبع تغذیه در دسته پاور های کف خواب شرکت مین ول قرا می گیرند. این پاور سوئیچینگ ضخامت کمی در حدود 30 میلی متر دارد. -
منبع تغذیه 24 ولت 62.5 آمپر مین ول
0 تومانمنبع تغذیه 24 ولت 62.5 آمپر مین ول با توان اندازه گیری شده 1500 وات واقعی در خروجی تحویل مصرف کننده قرار می گیرد. ولتاژ ورودی بین 180 تا 264 ولت ac و دارای مدار محدود کننده جریان در ورودی ، کنترل از راه دور و فن خنک کننده داخلی بلبرینگی DC از ویژگی های این محصول است. -
منبع تغذیه 24 ولت 8.8 آمپر مین ول
0 تومانمنبع تغذیه 24 ولت 8.8 آمپر مین ول (LRS-200-24) با توان و قدرت 211 وات در خروجی انداره گیری شده است. منبع تغذیه سوئیچینگ مین ول سری LRS-200-24 جزء درسته کف خواب محصولات این شرکت محسوب می شود. این منبع تغذیه توانای تحمل ولتاژ ورودی تا 300 را تا 5ثانیه دارد. راندمان در این منبع تغذیه تا 89.5% اندازه گیری شده است که بسیار بالا و کاربردی می باشد. تلفات… -
اینورتر 1500 وات سینوسی مین ول
0 توماناینورتر (مبدل DC به AC) 220 ولت مین ول با توان 1500 وات در خروجی اندازه گیری شده است. خروجی این اینورتر به صورت کاملا سینوسی و دقیق با ضریب خطا بسیار کم (THD < 0.3%) می باشد. توانایی تحمل سرج لحظه ای در مبدل DC به AC 1500 وات در زمان جریان کشی اولیه تا 3000 وات می رسد. همچنین راندمان در این محصول به عدد بالای 91 درصد… -
اینورتر 4 کیلووات اشنایدر سری ATV310 ورودی سه فاز
تماس بگیرید[gravityform id="9" title="true" description="true"]
Reviews
There are no reviews yet.