نقد و بررسی : Analog Input Module 6ES7134-6JD00-0CA1
Analog Input Module 6ES7134-6JD00-0CA1
SIMATIC SIEMENS ET 200SP, Analog input module , AI 4xRTD/TC High Feature, suitable for BU type A0, A1, Color code CC00, channel diagnostics, 16 bit, +/-0.1%, 2-/3-/4-wire
SIEMENS | |
General information |
|
Product type designation | AI 4x RTD/TC 2/3/4-wire HF, PU 1 |
HW functional status | From FS08 |
Firmware version
● FW update possible |
Yes |
usable BaseUnits | BU type A0, A1 |
Color code for module-specific color identification plate | CC00 |
Product function | |
● I&M data | Yes; I&M0 to I&M3 |
● Adjustment of measuring range | Yes |
Engineering with | |
● STEP 7 TIA Portal configurable/integrated as of version | V14 |
● STEP 7 configurable/integrated as of version | V5.6 |
● PCS 7 configurable/integrated as of version | V8.1 SP1 |
● PROFIBUS as of GSD version/GSD revision | One GSD file each, Revision 3 and 5 and higher |
● PROFINET as of GSD version/GSD revision | GSDML V2.3 |
Operating mode |
● Oversampling | No
No |
● MSI | |
CiR – Configuration in RUN | |
Reparameterization possible in RUN | Yes |
Calibration possible in RUN | Yes |
Supply voltage | |
Rated value (DC) | 24 V |
permissible range, lower limit (DC) | 19.2 V |
permissible range, upper limit (DC) | 28.8 V |
Reverse polarity protection | Yes |
Input current | |
Current consumption, max. | 35 mA |
Power loss | |
Power loss, typ. | 0.75 W |
Address area |
|
Address space per module | |
● Address space per module, max. | 8 byte; + 1 byte for QI information |
Hardware configuration | |
Automatic encoding | Yes |
● Mechanical coding element | Yes |
Selection of BaseUnit for connection variants | |
● 2-wire connection | BU type A0, A1 |
● 3-wire connection | BU type A0, A1 |
Analog inputs |
|
Number of analog inputs | 4 |
permissible input voltage for voltage input (destruction limit), max. | 30 V |
Cycle time (all channels), min. | Sum of the basic conversion times and additional processing times (depending on the parameterization of the active channels); for line compensation in case of a three-wire connection, an additional cycle is necessary |
Technical unit for temperature measurement adjustable | Yes; °C/°F/K |
Input ranges (rated values), voltages | |
● -1 V to +1 V | Yes; 16 bit incl. sign |
● Input resistance (-1 V to +1 V) | 1 MΩ |
● -250 mV to +250 mV | Yes; 16 bit incl. sign |
● Input resistance (-250 mV to +250 mV) | 1 MΩ |
● -50 mV to +50 mV | Yes; 16 bit incl. sign
1 MΩ |
● Input resistance (-50 mV to +50 mV) |
● Input resistance (Ni 500) | 1 MΩ
Yes; 16 bit incl. sign |
● Pt 100 | |
● Input resistance (Pt 100) | 1 MΩ |
● Pt 1000 | Yes; 16 bit incl. sign |
● Input resistance (Pt 1000) | 1 MΩ |
● Pt 200 | Yes; 16 bit incl. sign |
● Input resistance (Pt 200) | 1 MΩ |
● Pt 500 | Yes; 16 bit incl. sign |
● Input resistance (Pt 500) | 1 MΩ |
Input ranges (rated values), resistors | |
● 0 to 150 ohms | Yes; 15 bit |
● Input resistance (0 to 150 ohms) | 1 MΩ |
● 0 to 300 ohms | Yes; 15 bit |
● Input resistance (0 to 300 ohms) | 1 MΩ |
● 0 to 600 ohms | Yes; 15 bit |
● Input resistance (0 to 600 ohms) | 1 MΩ |
● 0 to 3000 ohms | Yes; 15 bit |
● Input resistance (0 to 3000 ohms) | 1 MΩ |
● 0 to 6000 ohms | Yes; 15 bit |
● Input resistance (0 to 6000 ohms) | 1 MΩ |
● PTC | Yes; 15 bit |
● Input resistance (PTC) | 1 MΩ |
Thermocouple (TC) | |
Temperature compensation | |
— parameterizable | Yes |
— Reference channel of the module | Yes |
— internal comparison point | Yes; with BaseUnit type A1 |
— Reference channel of the group | Yes |
— Number of reference channel groups | 4; Group 0 to 3 |
— fixed reference temperature | Yes |
Cable length |
|
● shielded, max. | 200 m; 50 m with thermocouples |
Analog value generation for the inputs | |
Measurement principle | integrating (Sigma-Delta) |
Integration and conversion time/resolution per channel | |
● Resolution with overrange (bit including sign), max. | 16 bit |
● Integration time, parameterizable | Yes |
● Basic conversion time, including integration time (ms) |
— additional processing time for wire-break check | 2 ms; In the ranges resistance thermometers, resistors and thermocouples
2 ms; for 3/4 wire transducer (resistance thermometer and resistor) |
— additional power line wire-break check | |
● Interference voltage suppression for interference frequency f1 in Hz | 16.6 / 50 / 60 Hz |
● Conversion time (per channel) | 180 / 60 / 50 ms |
Smoothing of measured values | |
● Number of smoothing levels | 4; None; 4/8/16 times |
● parameterizable | Yes |
Encoder | |
Connection of signal encoders | |
● for voltage measurement | Yes |
● for resistance measurement with two-wire connection | Yes |
● for resistance measurement with three-wire connection | Yes |
● for resistance measurement with four-wire connection | Yes |
Errors/accuracies | |
Linearity error (relative to input range), (+/-) | 0.01 %; ±0.1 % for resistance thermometers and resistance |
Temperature error (relative to input range), (+/-) | 0.0009 %/K; ±0.005 % / K at thermocouple |
Crosstalk between the inputs, min. | -50 dB |
Repeat accuracy in steady state at 25 °C (relative to input range), (+/-) | 0.05 % |
Operational error limit in overall temperature range | |
● Voltage, relative to input range, (+/-) | 0.1 % |
● Resistance, relative to input range, (+/-) | 0.1 % |
Basic error limit (operational limit at 25 °C) | |
● Voltage, relative to input range, (+/-) | 0.05 % |
● Resistance, relative to input range, (+/-) | 0.05 % |
Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency | |
● Series mode interference (peak value of interference < rated value of input range), min. | 70 dB |
● Common mode voltage, max. | 10 V |
● Common mode interference, min. | 90 dB |
Isochronous mode |
|
Isochronous operation (application synchronized up to terminal) | No |
Interrupts/diagnostics/status information | |
Diagnostics function | Yes |
Alarms |
● Diagnostic alarm | Yes
Yes; two upper and two lower limit values in each case |
● Limit value alarm | |
Diagnostic messages | |
● Monitoring the supply voltage | Yes |
● Wire-break | Yes; channel by channel |
● Group error | Yes |
● Overflow/underflow | Yes; channel by channel |
Diagnostics indication LED | |
● Monitoring of the supply voltage (PWR-LED) | Yes; Green PWR LED |
● Channel status display | Yes; Green LED |
● for channel diagnostics | Yes; Red LED |
● for module diagnostics | Yes; green/red DIAG LED |
Potential separation | |
Potential separation channels | |
● between the channels | No |
● between the channels and backplane bus | Yes |
● between the channels and the power supply of the electronics | Yes |
Isolation |
|
Isolation tested with | 707 V DC (type test) |
Ambient conditions | |
Ambient temperature during operation | |
● horizontal installation, min. | -30 °C |
● horizontal installation, max. | 60 °C |
● vertical installation, min. | -30 °C |
● vertical installation, max. | 50 °C |
Altitude during operation relating to sea level | |
● Installation altitude above sea level, max. | 5 000 m; Restrictions for installation altitudes > 2 000 m, see manual |
Dimensions | |
Width | 15 mm |
Height | 73 mm |
Depth | 58 mm |
last modified: | 01/20/2020 |
SIEMENS Analog Input Module 6ES7134-6JD00-0CA1
Be the first to review “Analog Input Module 6ES7134-6JD00-0CA1”
-
منبع تغذیه 12 ولت 125 آمپر مین ول
0 تومانمنبع تغذیه 12 ولت 125 آمپر مین ول (RSP-1500-12) با توان خروجی 1500 وات واقعی اندازه گیری شده است. این محصول مین ول از سری کف خواب این شرکت محسوب می شود. در این منبع تغذیه بازدهی فوق العاده بالا بوده و به 90% می رسد. . سوئیچینگ 12 ولت 125 آمپر توانایی حفاظت در برابر بار اضافه، ولتاژ بالا ، دمای بالا ، اتصال کوتاه در خروجی دارد. این… -
درایو 7.5 کیلووات 40آمپر کیوما QMA Q1000N
11,055,000 تومان[gravityform id="9" title="true" description="true"] اینورتر های شرکت QMA Electronics چین بر اساس موتور های گیربکسی طراحی شده و به صورت تخصصی بر روی آسانسور و بالابر پیاده سازی شده است .درایو کنترل دور موتور آسانسور qma کیوما چین که در صنعت آسانسور ایران نام شناخته شده ای می باشد. در انواع مختلف OPEN و CLOSE طراحی و ساخته شده است -
پنل لمسی 10.1 اینچ HMI WEINTEK
تماس بگیریدپنل لمسی (اچ ام ای) 10.1 اینچ وینتک با رزولوشن 800*480 ساخته شده است. HMI وینتک سری MT8101IE دارای صفحه نمایش از نوع TFT LCD همراه با نور پس زمینه LED می باشد. پردازنده به کار رفته در این پنل لمسی Cortex-A8 با فرکانس 600 مگا هرتز و از نوع 32 بیتی می باشد. حافظه رم (RAM) در این HMI ، 128 MB می باشد. همچنین حافظه فلش (FLASH) در… -
منبع تغذیه 12 ولت 50 آمپر مین ول
0 تومانمنبع تغذیه 12 ولت 50 آمپر مین ول با توان و قدرت 600 وات واقعی اندازه گیری شده است. این منبع تغذیه سوئیچینگ در دسته محصولات کف خواب این شرکت تایوانی قرار می گیرد. راندمان در این منبع تغذیه به عدد بالای 88% می رسد که به راحتی پاسخگوی نیاز کار می باشد. از ویژگی های حفاظتی در این منبع تغذیه می توان به حفاظت در برابر اتصال كوتاه، اضافه… -
منبع تغذیه 24 ولت 21 آمپر مین ول
0 تومانمنبع تغذیه 24 ولت 24 آمپر مین ول (RSP-500-24) با توان 500 وات اندازه گیری شده در خروجی می باشد. منبع تغذیه 24 ولت مین ول در دسته منبع تغذیه های کف خواب این شرکت قرار می گیرد. راندمان در این منبع تغذیه به 89% میرسد که مقدار قابل توجهی می باشد. این منبع تغذیه دارای مدار اصلاح ضریب قدرت یا PFC می باشد. -
سنسور القایی OMRON E2B-M12KS04-WP-B2 امرن
تماس بگیرید◀️ نوع محصول : سنسور امرن / القایی / مجاورتی ◀️ قطر سنسور : استوانه ای قطر 12 ◀️ خروجی سنسور : PNP NC
Reviews
There are no reviews yet.