نقد و بررسی : Analog Input Module 6ES7134-6GF00-0AA1
Analog Input Module 6ES7134-6GF00-0AA1
SIMATIC ET 200SP, Analog Input Module , AI 8XI 2-/4-wire Basic, suitable for BU type A0, A1, Color code CC01, Module diagnostics, 16 bit
SIEMENS | |
General information |
|
Product type designation | AI 8xI 2-/4-wire BA |
HW functional status | from FS04 |
Firmware version
● FW update possible |
Yes |
usable BaseUnits | BU type A0, A1 |
Color code for module-specific color identification plate | CC01 |
Product function | |
● I&M data | Yes; I&M0 to I&M3 |
● Measuring range scalable | No |
Engineering with | |
● STEP 7 TIA Portal configurable/integrated as of version | V13 SP1 |
● STEP 7 configurable/integrated as of version | V5.5 SP3 / – |
● PROFIBUS as of GSD version/GSD revision | GSD Revision 5 |
● PROFINET as of GSD version/GSD revision | GSDML V2.3 |
Operating mode | |
● Oversampling | No |
● MSI | No |
CiR – Configuration in RUN | |
Reparameterization possible in RUN | Yes |
Calibration possible in RUN | No |
Supply voltage | |
Rated value (DC) | 24 V |
permissible range, lower limit (DC) | 19.2 V |
permissible range, upper limit (DC) | 28.8 V |
Reverse polarity protection | Yes |
Input current |
|
Current consumption, max. | 25 mA; without sensor supply |
Encoder supply | |
24 V encoder supply | |
● 24 V | Yes |
● Short-circuit protection | Yes |
● Output current, max. | 0.7 A; total current of all encoders/channels |
Power loss | |
Power loss, typ. | 0.7 W; Without encoder supply voltage |
Address area | |
Address space per module | |
● Address space per module, max. | 16 byte |
Hardware configuration | |
Automatic encoding | |
● Mechanical coding element | Yes |
Selection of BaseUnit for connection variants | |
● 1-wire connection | BU type A0, A1 |
● 2-wire connection | BU type A0, A1 |
● 4-wire connection | BU type A0, A1 + potential distributor module |
Analog inputs | |
Number of analog inputs | 8; Single-ended |
● For current measurement | 8 |
permissible input current for current input (destruction limit), max. | 50 mA |
Cycle time (all channels), min. | 1 ms; per channel |
Input ranges (rated values), currents | |
● 0 to 20 mA | Yes |
● Input resistance (0 to 20 mA) | 100 Ω; 15 bit |
● -20 mA to +20 mA | Yes |
● Input resistance (-20 mA to +20 mA) | 100 Ω; 16 bit incl. sign |
● 4 mA to 20 mA | Yes
100 Ω; 15 bit |
● Input resistance (4 mA to 20 mA) | |
Cable length | |
● shielded, max. | 200 m |
Analog value generation for the inputs | |
Integration and conversion time/resolution per channel | |
● Resolution with overrange (bit including sign), max. | 16 bit |
● Integration time, parameterizable | Yes |
● Interference voltage suppression for interference frequency f1 in Hz | 16.67 / 50 / 60 / 4 800 (16.67 / 50 / 60) |
● Conversion time (per channel) | 180 / 60 / 50 / 0.625 (67.5 / 22.5 / 18.75) ms |
Smoothing of measured values | |
● Number of smoothing levels | 4; None; 4/8/16 times |
● parameterizable | Yes |
Encoder |
|
Connection of signal encoders | |
● for voltage measurement | No |
● for current measurement as 2-wire transducer | Yes |
— Burden of 2-wire transmitter, max. | 650 Ω |
● for current measurement as 4-wire transducer | Yes |
Errors/accuracies | |
Linearity error (relative to input range), (+/-) | 0.01 % |
Temperature error (relative to input range), (+/-) | 0.005 %/K |
Crosstalk between the inputs, min. | 50 dB |
Repeat accuracy in steady state at 25 °C (relative to input range), (+/-) | 0.05 % |
Operational error limit in overall temperature range | |
● Current, relative to input range, (+/-) | 0.5 % |
Basic error limit (operational limit at 25 °C) | |
● Current, relative to input range, (+/-) | 0.3 % |
Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency | |
● Series mode interference (peak value of interference < rated value of input range), min. | 70 dB; With conversion time 67.5 / 22.5 / 18.75 ms: 40 dB |
Isochronous mode | |
Isochronous operation (application synchronized up to terminal) | No |
Interrupts/diagnostics/status information | |
Diagnostics function | Yes |
Alarms | |
● Diagnostic alarm | Yes |
● Limit value alarm | No |
Diagnostic messages | |
● Monitoring the supply voltage | Yes |
● Wire-break | Yes; at 4 to 20 mA |
● Short-circuit | Yes; Sensor supply to M; module by module |
● Group error | Yes |
● Overflow/underflow | Yes |
Diagnostics indication LED | |
● Monitoring of the supply voltage (PWR-LED) | Yes; Green LED |
● Channel status display | Yes; Green LED |
● for channel diagnostics | No |
● for module diagnostics | Yes; green/red DIAG LED |
Potential separation | |
Potential separation channels | |
● between the channels | No |
● between the channels and backplane bus | Yes |
● between the channels and the power supply of the electronics | No |
Isolation |
|
Isolation tested with | 707 V DC (type test) |
Ambient conditions | |
Ambient temperature during operation | |
● horizontal installation, min. | -30 °C |
● horizontal installation, max. | 60 °C |
● vertical installation, min. | -30 °C |
● vertical installation, max. | 50 °C |
Altitude during operation relating to sea level | |
● Installation altitude above sea level, max. | 5 000 m; Restrictions for installation altitudes > 2 000 m, see manual |
Dimensions | |
Width | 15 mm |
Height | 73 mm |
Depth | 58 mm |
Weights | |
Weight, approx. | 31 g |
last modified: | 01/20/2020 |
SIEMENS Analog Input Module 6ES7134-6GF00-0AA1
Be the first to review “Analog Input Module 6ES7134-6GF00-0AA1”
-
منبع تغذیه 5 ولت 10 آمپر مین ول
0 تومانمنبع تغذیه 5 ولت 10 آمپر مین ول (LRS-50-5) با توان و قدرت 52.8 وات در خروجی انداره گیری شده است. سوئیچینگ مین ول سری LRS-50-5 جزء درسته کف خواب محصولات این شرکت محسوب می شود. این منبع تغذیه توانای تحمل ولتاژ ورودی تا 300 را تا 5 ثانیه دارد. راندمان در این منبع تغذیه تا 90% اندازه گیری شده است که بسیار بالا و کاربردی می باشد. تلفات در… -
منبع تغذیه 24 ولت 10 آمپر مین ول
0 تومانمنبع تغذیه 24 ولت 10 آمپر مین ول (WDR-240-24) با توان خروجی 240 وات تحویلی به مصرف کننده اندازه گیری شده است. این محصول جزء سری ریلی پاور های مین ول محسوب می شود. ولتاژ ورودی که در این منبع تغذیه قابل قبول است بین 180 ولت تا 550 ولت ac می باشد. (تک فاز و دو فاز). راندمان این پاور به 91% می رسد که این خروجی ایده ال… -
منبع تغذیه 24 ولت 8.8 آمپر مین ول
0 تومانمنبع تغذیه 24 ولت 8.8 آمپر مین ول (LRS-200-24) با توان و قدرت 211 وات در خروجی انداره گیری شده است. منبع تغذیه سوئیچینگ مین ول سری LRS-200-24 جزء درسته کف خواب محصولات این شرکت محسوب می شود. این منبع تغذیه توانای تحمل ولتاژ ورودی تا 300 را تا 5ثانیه دارد. راندمان در این منبع تغذیه تا 89.5% اندازه گیری شده است که بسیار بالا و کاربردی می باشد. تلفات… -
منبع تغذیه 24 ولت 20 آمپر(ورودی380ولت) مین ول
0 تومانمنبع تغذیه 24 ولت 20 آمپر مین ول با توان اندازه گیری شده 480 وات واقعی در خروجی در اختیار کاربر است. این منبع تغذیه سوئیچینگ در دسته محصولات ریلی این شرکت قرار می گیرد. منبع تغذیه TDR-480-24 توانایی شروع به کار با ولتاژ سه فاز و دو فاز را دارد. راندمان بالا تا 93% و مصرف کم توان در حالت بی باری از ویژگی های این محصول به حساب… -
مبدل 24 به 12 ولت 2.1 آمپر مین ول
0 تومانکانورتر 12 ولت 2.1 آمپر مین ول با توان 25.2 وات اندازه گیری شده تحویل مصرف کننده قرار می گیرد. این منبع تغذیه DC به DC از جمله محصولات کف خواب شرکت مین ول محسوب می شود. محافظت در برابر اتصال کوتاه، اضافه بار، ولتاژ بالا و درجه حرارت بالا از ویژگی های این کانورتر به شمار می رود. این منبع تغذیه DC به DC در فیلتر EMI ساخته شده… -
اینورتر 700 وات سینوسی مین ول
0 توماناینورتر (مبدل DC به AC) 220 ولت مین ول با توان 700 وات در خروجی اندازه گیری شده است. خروجی این اینورتر به صورت کاملا سینوسی و دقیق با ضریب خطا بسیار کم (THD < 0.3%) می باشد. توانایی تحمل سرج لحظه ای در این مبدل در زمان جریان کشی اولیه تا 1400 وات می رسد. همچنین راندمان در این مبدل DC به AC 700 وات به عدد بالای 91…
Reviews
There are no reviews yet.