نقد و بررسی : Analog Input Module 6ES7134-6GF00-0AA1
Analog Input Module 6ES7134-6GF00-0AA1
SIMATIC ET 200SP, Analog Input Module , AI 8XI 2-/4-wire Basic, suitable for BU type A0, A1, Color code CC01, Module diagnostics, 16 bit
SIEMENS | |
General information |
|
Product type designation | AI 8xI 2-/4-wire BA |
HW functional status | from FS04 |
Firmware version
● FW update possible |
Yes |
usable BaseUnits | BU type A0, A1 |
Color code for module-specific color identification plate | CC01 |
Product function | |
● I&M data | Yes; I&M0 to I&M3 |
● Measuring range scalable | No |
Engineering with | |
● STEP 7 TIA Portal configurable/integrated as of version | V13 SP1 |
● STEP 7 configurable/integrated as of version | V5.5 SP3 / – |
● PROFIBUS as of GSD version/GSD revision | GSD Revision 5 |
● PROFINET as of GSD version/GSD revision | GSDML V2.3 |
Operating mode | |
● Oversampling | No |
● MSI | No |
CiR – Configuration in RUN | |
Reparameterization possible in RUN | Yes |
Calibration possible in RUN | No |
Supply voltage | |
Rated value (DC) | 24 V |
permissible range, lower limit (DC) | 19.2 V |
permissible range, upper limit (DC) | 28.8 V |
Reverse polarity protection | Yes |
Input current |
|
Current consumption, max. | 25 mA; without sensor supply |
Encoder supply | |
24 V encoder supply | |
● 24 V | Yes |
● Short-circuit protection | Yes |
● Output current, max. | 0.7 A; total current of all encoders/channels |
Power loss | |
Power loss, typ. | 0.7 W; Without encoder supply voltage |
Address area | |
Address space per module | |
● Address space per module, max. | 16 byte |
Hardware configuration | |
Automatic encoding | |
● Mechanical coding element | Yes |
Selection of BaseUnit for connection variants | |
● 1-wire connection | BU type A0, A1 |
● 2-wire connection | BU type A0, A1 |
● 4-wire connection | BU type A0, A1 + potential distributor module |
Analog inputs | |
Number of analog inputs | 8; Single-ended |
● For current measurement | 8 |
permissible input current for current input (destruction limit), max. | 50 mA |
Cycle time (all channels), min. | 1 ms; per channel |
Input ranges (rated values), currents | |
● 0 to 20 mA | Yes |
● Input resistance (0 to 20 mA) | 100 Ω; 15 bit |
● -20 mA to +20 mA | Yes |
● Input resistance (-20 mA to +20 mA) | 100 Ω; 16 bit incl. sign |
● 4 mA to 20 mA | Yes
100 Ω; 15 bit |
● Input resistance (4 mA to 20 mA) | |
Cable length | |
● shielded, max. | 200 m |
Analog value generation for the inputs | |
Integration and conversion time/resolution per channel | |
● Resolution with overrange (bit including sign), max. | 16 bit |
● Integration time, parameterizable | Yes |
● Interference voltage suppression for interference frequency f1 in Hz | 16.67 / 50 / 60 / 4 800 (16.67 / 50 / 60) |
● Conversion time (per channel) | 180 / 60 / 50 / 0.625 (67.5 / 22.5 / 18.75) ms |
Smoothing of measured values | |
● Number of smoothing levels | 4; None; 4/8/16 times |
● parameterizable | Yes |
Encoder |
|
Connection of signal encoders | |
● for voltage measurement | No |
● for current measurement as 2-wire transducer | Yes |
— Burden of 2-wire transmitter, max. | 650 Ω |
● for current measurement as 4-wire transducer | Yes |
Errors/accuracies | |
Linearity error (relative to input range), (+/-) | 0.01 % |
Temperature error (relative to input range), (+/-) | 0.005 %/K |
Crosstalk between the inputs, min. | 50 dB |
Repeat accuracy in steady state at 25 °C (relative to input range), (+/-) | 0.05 % |
Operational error limit in overall temperature range | |
● Current, relative to input range, (+/-) | 0.5 % |
Basic error limit (operational limit at 25 °C) | |
● Current, relative to input range, (+/-) | 0.3 % |
Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency | |
● Series mode interference (peak value of interference < rated value of input range), min. | 70 dB; With conversion time 67.5 / 22.5 / 18.75 ms: 40 dB |
Isochronous mode | |
Isochronous operation (application synchronized up to terminal) | No |
Interrupts/diagnostics/status information | |
Diagnostics function | Yes |
Alarms | |
● Diagnostic alarm | Yes |
● Limit value alarm | No |
Diagnostic messages | |
● Monitoring the supply voltage | Yes |
● Wire-break | Yes; at 4 to 20 mA |
● Short-circuit | Yes; Sensor supply to M; module by module |
● Group error | Yes |
● Overflow/underflow | Yes |
Diagnostics indication LED | |
● Monitoring of the supply voltage (PWR-LED) | Yes; Green LED |
● Channel status display | Yes; Green LED |
● for channel diagnostics | No |
● for module diagnostics | Yes; green/red DIAG LED |
Potential separation | |
Potential separation channels | |
● between the channels | No |
● between the channels and backplane bus | Yes |
● between the channels and the power supply of the electronics | No |
Isolation |
|
Isolation tested with | 707 V DC (type test) |
Ambient conditions | |
Ambient temperature during operation | |
● horizontal installation, min. | -30 °C |
● horizontal installation, max. | 60 °C |
● vertical installation, min. | -30 °C |
● vertical installation, max. | 50 °C |
Altitude during operation relating to sea level | |
● Installation altitude above sea level, max. | 5 000 m; Restrictions for installation altitudes > 2 000 m, see manual |
Dimensions | |
Width | 15 mm |
Height | 73 mm |
Depth | 58 mm |
Weights | |
Weight, approx. | 31 g |
last modified: | 01/20/2020 |
SIEMENS Analog Input Module 6ES7134-6GF00-0AA1
Be the first to review “Analog Input Module 6ES7134-6GF00-0AA1”
-
منبع تغذیه 24 ولت 5 آمپر مین ول
0 تومانمنبع تغذیه 24 ولت 5 آمپر محصولی از شرکت مین ول با توان خروجی 120 وات ساخته شده است. منبع تغذیه 24 ولت مین ول سری SDR-120 جزء دسته ریلی این شرکت تایوانی محسوب می شود. راندمان در این منبع تغذیه به عدد بالای 91% میرسد که این کیفیت بالا را مدیون طراحی و کیفیت بالای قطعات هستیم. یکی از بخش هایی که به بهبود عملکرد این منبع تغیه کمک… -
مبدل 24 به 12 ولت 2.1 آمپر مین ول
0 تومانکانورتر 12 ولت 2.1 آمپر مین ول با توان 25.2 وات اندازه گیری شده تحویل مصرف کننده قرار می گیرد. این منبع تغذیه DC به DC از جمله محصولات کف خواب شرکت مین ول محسوب می شود. محافظت در برابر اتصال کوتاه، اضافه بار، ولتاژ بالا و درجه حرارت بالا از ویژگی های این کانورتر به شمار می رود. این منبع تغذیه DC به DC در فیلتر EMI ساخته شده… -
منبع تغذیه 24 ولت 20 آمپر مین ول
0 تومانمنبع تغذیه 24 ولت 20 آمپر مین ول جزء سری ریلی این شرکت محسوب می شود. توان خروجی 480 وات اندازه گیری شده که در اختیار کاربر قرار می گیرد. این منبع تغذیه بر روی ریل DIN TS-3.5 یا DIN TS-15 نصب می شود. این سری از محصولات مین ول دارای سیستم اصلاح ضریب قدرت (PFC) می باشد. راندمان کاری این منبع تغذیه را به 93% به میرسد که در… -
منبع تغذیه وشارژر 24 ولت 3.5 آمپر مین ول
0 تومانمنبع تغذیه و شارژر 24 ولت 3.5 آمپر مین ول با توان اندازه گیری شده 100.7 وات در خروجی محاسبه شده است. این محصول در زمان اتصال باتری در کانال اول خروجی جریان معادل 2.4 آمپر و در کانال دوم معادل 1.25 آمپر می باشد. منبع تغذیه PSC-100 با قابلیت UPS از سری منبع تغذیه های سری SECURITY میباشد. راندمان در این شارژر به 88% می رسد که به راحتی… -
منبع تغذیه سه خروجی مین ول
0 تومانمنبع تغذیه سه خروجی 5 ولت 7 آمپر مین ول با توان 87.5 وات در خروجی در اختیار کاربر قرار می گیرد. همچنین این منبع تغذیه (سری C) دارای دو خروجی مثبت 15 و منفی 15 ولت می باشد. راندمان یا بازدهی در این منبع تغذیه به عدد بالای 77 درصد می رسد. که بسیار کارآمد می باشد. سری RT-85 شامل چهار دسته A,B,C و D می شود: سری A… -
منبع تغذیه دو خروجی مین ول
0 تومانمنبع تغذیه دو خروجی 5 ولت 6 آمپر مین ول با توان 54 وات در خروجی در اختیار کاربر قرار می گیرد. همچنین این منبع تغذیه دارای خروجی ثانویه ای با ولتاژ 12 ولت 2 امپر می باشد. راندمان یا بازدهی در این منبع تغذیه به عدد بالای 78 درصد می رسد. که بسیار کارآمد می باشد. سری RD-50 شامل دو دسته A و B می شود. سری A دارای…
Reviews
There are no reviews yet.