Digital Output Module 6ES7132-6BH00-0BA0
تماس بگیرید
بررسی اجمالی محصول
*** Spare part *** SIMATIC ET 200SP, Digital Output Module , DQ 16x 24VDC/0.5A Standard, suitable for BU type A0, Color code CC00, module diagnostics
نقد و بررسی : Digital Output Module 6ES7132-6BH00-0BA0
Digital Output Module 6ES7132-6BH00-0BA0
*** Spare part *** SIMATIC ET 200SP, Digital Output Module , DQ 16x 24VDC/0.5A Standard, suitable for BU type A0, Color code CC00, module diagnostics
SIEMENS | |||
General information |
|||
Product type designation | DQ 16×24 VDC/0.5 A ST | ||
Firmware version
● FW update possible |
V1.0 | ||
Yes | |||
usable BaseUnits | BU type A0 | ||
Color code for module-specific color identification plate | CC00 | ||
Product function | |||
● I&M data | Yes; I&M0 to I&M3 | ||
Engineering with | |||
● STEP 7 TIA Portal configurable/integrated as of version | V11 SP2 / V13 | ||
● STEP 7 configurable/integrated as of version | V5.5 SP3 / –
|
||
● PCS 7 configurable/integrated as of version | |||
● PROFIBUS as of GSD version/GSD revision | |||
● PROFINET as of GSD version/GSD revision | GSDML V2.3 | ||
Operating mode | |||
● DQ | Yes | ||
● DQ with energy-saving function | No |
● PWM | No
No |
● Oversampling | |
● MSO | No |
Redundancy | |
● Redundancy capability | Yes |
Supply voltage | |
Rated value (DC) | 24 V |
permissible range, lower limit (DC) | 19.2 V |
permissible range, upper limit (DC) | 28.8 V |
Reverse polarity protection | Yes |
Input current |
|
Current consumption, max. | 60 mA; without load |
Output voltage | |
Rated value (DC) | 24 V |
Power loss | |
Power loss, typ. | 1 W |
Address area | |
Address space per module | |
● Address space per module, max. | 2 byte |
Hardware configuration | |
Automatic encoding | |
● Mechanical coding element | Yes |
Selection of BaseUnit for connection variants | |
● 1-wire connection | BU type A0 |
● 2-wire connection | BU type A0 + Potential isolation module |
● 3-wire connection | BU type A0 + Potential isolation module |
● 4-wire connection | BU type A0 + Potential isolation module |
Digital outputs | |
Type of digital output | Source output (PNP, current-sourcing) |
Number of digital outputs | 16 |
Current-sinking | No |
Current-sourcing | Yes |
Digital outputs, parameterizable | Yes |
Short-circuit protection | Yes |
● Response threshold, typ. | 0.7 to 1.3 A |
Limitation of inductive shutdown voltage to | Typ. L+ (-50 V) |
Controlling a digital input | Yes |
Switching capacity of the outputs |
|
● with resistive load, max. | 0.5 A |
● on lamp load, max. | 5 W |
Load resistance range | |
● lower limit | 48 Ω |
● upper limit | 12 kΩ |
Output current | |
● for signal “1” rated value | 0.5 A |
● for signal “0” residual current, max. | 0.1 mA |
Output delay with resistive load | |
● “0” to “1”, typ. | 50 µs |
● “1” to “0”, typ. | 100 µs |
Parallel switching of two outputs | |
● for uprating | No |
● for redundant control of a load | Yes |
Switching frequency | |
● with resistive load, max. | 100 Hz |
● with inductive load, max. | 2 Hz |
● on lamp load, max. | 10 Hz |
Total current of the outputs | |
● Current per channel, max. | 0.5 A |
● Current per module, max. | 8 A |
Total current of the outputs (per module) | |
horizontal installation | |
— up to 30 °C, max. | 8 A |
— up to 40 °C, max. | 8 A |
— up to 50 °C, max. | 6 A |
— up to 60 °C, max. | 4 A |
vertical installation | |
— up to 30 °C, max. | 8 A |
— up to 40 °C, max. | 6 A |
— up to 50 °C, max. | 4 A |
— up to 60 °C, max. | 4 A |
Cable length | |
● shielded, max. | 1 000 m |
● unshielded, max. | 600 m |
Isochronous mode | |
Isochronous operation (application synchronized up to terminal) | No |
Interrupts/diagnostics/status information | |
Diagnostics function | Yes |
Substitute values connectable | Yes |
Alarms | |
● Diagnostic alarm | Yes |
Diagnostic messages | |
● Monitoring the supply voltage | Yes |
● Wire-break | Yes; Module-wise |
● Short-circuit to M | Yes; Module-wise |
● Short-circuit to L+ | Yes; Module-wise |
● Group error | Yes |
Diagnostics indication LED |
|
● Monitoring of the supply voltage (PWR-LED) | Yes; Green PWR LED |
● Channel status display | Yes; Green LED |
● for channel diagnostics | No |
● for module diagnostics | Yes; green/red DIAG LED |
Potential separation | |
Potential separation channels | |
● between the channels | No |
● between the channels and backplane bus | Yes |
● between the channels and the power supply of the electronics | No |
Isolation | |
Isolation tested with | 707 V DC (type test) |
Standards, approvals, certificates | |
Suitable for safety functions | No |
Suitable for safety-related tripping of standard modules | Yes; From FS03 |
Highest safety class achievable in safety mode | |
● Performance level according to ISO 13849-1 | PL d |
● SIL acc. to IEC 61508 | SIL 2 |
Ambient conditions | |
Ambient temperature during operation | |
● horizontal installation, min. | 0 °C |
● horizontal installation, max. | 60 °C |
● vertical installation, min. | 0 °C; in all other mounting positions |
● vertical installation, max. | 50 °C; in all other mounting positions |
Altitude during operation relating to sea level | |
● Ambient air temperature-barometric pressurealtitude | On request: Negative ambient temperature down to -30 °C
(without condensation), installation altitudes between 2 000 m and 5 000 m |
Dimensions | |
Width | 15 mm |
Height | 73 mm |
Depth | 58 mm |
SIEMENS Digital Output Module 6ES7132-6BH00-0BA0 |
Be the first to review “Digital Output Module 6ES7132-6BH00-0BA0”
-
منبع تغذیه 48 ولت 7.3 آمپر مین ول
0 تومانمنبع تغذیه 48 ولت 7.3 آمپر مین ول (LRS-350-48) با توان اندازه گیری شده 350.4 وات در خروجی محاسبه شده است. این منبع تغذیه در دسته پاور های کف خواب شرکت مین ول قرار می گیرند. راندمان در منبع تغذیه 48 ولت 7.3 آمپر به 89% می رسد که به راحتی پاسخگوی نیاز کاربران است. تلفات در این منبع تغذیه بسیار کم بوده به طوری که در زمان بی باری… -
منبع تغذیه 5 ولت 3 آمپر مین ول
0 تومانمنبع تغذیه 5 ولت 3 آمپر مین ول (MDR-20-5) در مجموع با 20 وات واقعی در خروجی اندازه گیری شده است. سری MDR 20 در دسته محصولات ریلی شرکت مین ول قرار می گیرند. بازدهی (راندمان) این کانورتر به عدد بالای 80 درصد می رسد. که پاسخگوی نیاز های مصرف کننده می باشد. از جمله ویژگی های حفاظتی که این محصول داراست میتوان به حفاظت در برابر اتصال کوتاه ،… -
اینورتر 400 وات سینوسی مین ول
0 توماناینورتر (مبدل DC به AC) 220 ولت مین ول با توان 400 وات در خروجی اندازه گیری شده است. خروجی این اینورتر به صورت کاملا سینوسی و دقیق با ضریب خطا بسیار کم (THD < 0.3%) می باشد. توانایی تحمل سرج لحظه ای در این مبدل در زمان جریان کشی اولیه تا 800 وات می رسد. همچنین راندمان در مبدل DC به AC 400 وات به عدد بالای 88.5 درصد… -
منبع تغذیه 24 ولت 40 آمپر مین ول
0 تومانمنبع تغذیه 24 ولت 40 آمپر مین ول (RSP-1000-24) با توان خروجی 1008 وات واقعی اندازه گیری شده است. این محصول مین ول از سری کف خواب این شرکت محسوب می شود. در این منبع تغذیه بازدهی فوق العاده بالا بوده و به 90% می رسد. سوئیچینگ 24 ولت 40 آمپر قابلیت پارالل (موازی سازی) 4 دستگاه با یک دیگر را دارد. ولتاژ خروجی در این منبع تغذیه از طریق… -
منبع تغذیه و شارژر 24 ولت 5.8 آمپر مین ول
0 تومانمنبع تغذیه و شارژر 24 ولت 5.8 آمپر مین ول با توان اندازه گیری شده 160 وات در خروجی محاسبه شده است. این محصول در زمان اتصال باتری در کانال اول خروجی جریان معادل 3.8 آمپر و در کانال دوم معادل 2 آمپر می باشد. منبع تغذیه PSC-160 با قابلیت UPS از سری منبع تغذیه های سری SECURITY می باشد. همچنین تجهیز مدار ورودی به اصلاح ضریب قدرت ACTIVE PFC،… -
شارژر 28.8 ولت 21 آمپر مین ول
0 تومانشارژر 28.8 ولت 21 آمپر مین ول با توان اندازه گیری شده 600 وات در خروجی محاسبه شده است. اندمان در این شارژر به 87% می رسد که به راحتی پاسخگوی نیاز کاربران است. از ویژگی های این شارژر می توان به شارژ سه مرحله ای دارای مدار اصلاح ضریب قدرت PFC اشاره کرد
Reviews
There are no reviews yet.