Digital Output Module 6ES7132-6BH00-0BA0
تماس بگیرید
بررسی اجمالی محصول
*** Spare part *** SIMATIC ET 200SP, Digital Output Module , DQ 16x 24VDC/0.5A Standard, suitable for BU type A0, Color code CC00, module diagnostics
نقد و بررسی : Digital Output Module 6ES7132-6BH00-0BA0
Digital Output Module 6ES7132-6BH00-0BA0
*** Spare part *** SIMATIC ET 200SP, Digital Output Module , DQ 16x 24VDC/0.5A Standard, suitable for BU type A0, Color code CC00, module diagnostics
SIEMENS | |||
General information |
|||
Product type designation | DQ 16×24 VDC/0.5 A ST | ||
Firmware version
● FW update possible |
V1.0 | ||
Yes | |||
usable BaseUnits | BU type A0 | ||
Color code for module-specific color identification plate | CC00 | ||
Product function | |||
● I&M data | Yes; I&M0 to I&M3 | ||
Engineering with | |||
● STEP 7 TIA Portal configurable/integrated as of version | V11 SP2 / V13 | ||
● STEP 7 configurable/integrated as of version | V5.5 SP3 / –
|
||
● PCS 7 configurable/integrated as of version | |||
● PROFIBUS as of GSD version/GSD revision | |||
● PROFINET as of GSD version/GSD revision | GSDML V2.3 | ||
Operating mode | |||
● DQ | Yes | ||
● DQ with energy-saving function | No |
● PWM | No
No |
● Oversampling | |
● MSO | No |
Redundancy | |
● Redundancy capability | Yes |
Supply voltage | |
Rated value (DC) | 24 V |
permissible range, lower limit (DC) | 19.2 V |
permissible range, upper limit (DC) | 28.8 V |
Reverse polarity protection | Yes |
Input current |
|
Current consumption, max. | 60 mA; without load |
Output voltage | |
Rated value (DC) | 24 V |
Power loss | |
Power loss, typ. | 1 W |
Address area | |
Address space per module | |
● Address space per module, max. | 2 byte |
Hardware configuration | |
Automatic encoding | |
● Mechanical coding element | Yes |
Selection of BaseUnit for connection variants | |
● 1-wire connection | BU type A0 |
● 2-wire connection | BU type A0 + Potential isolation module |
● 3-wire connection | BU type A0 + Potential isolation module |
● 4-wire connection | BU type A0 + Potential isolation module |
Digital outputs | |
Type of digital output | Source output (PNP, current-sourcing) |
Number of digital outputs | 16 |
Current-sinking | No |
Current-sourcing | Yes |
Digital outputs, parameterizable | Yes |
Short-circuit protection | Yes |
● Response threshold, typ. | 0.7 to 1.3 A |
Limitation of inductive shutdown voltage to | Typ. L+ (-50 V) |
Controlling a digital input | Yes |
Switching capacity of the outputs |
|
● with resistive load, max. | 0.5 A |
● on lamp load, max. | 5 W |
Load resistance range | |
● lower limit | 48 Ω |
● upper limit | 12 kΩ |
Output current | |
● for signal “1” rated value | 0.5 A |
● for signal “0” residual current, max. | 0.1 mA |
Output delay with resistive load | |
● “0” to “1”, typ. | 50 µs |
● “1” to “0”, typ. | 100 µs |
Parallel switching of two outputs | |
● for uprating | No |
● for redundant control of a load | Yes |
Switching frequency | |
● with resistive load, max. | 100 Hz |
● with inductive load, max. | 2 Hz |
● on lamp load, max. | 10 Hz |
Total current of the outputs | |
● Current per channel, max. | 0.5 A |
● Current per module, max. | 8 A |
Total current of the outputs (per module) | |
horizontal installation | |
— up to 30 °C, max. | 8 A |
— up to 40 °C, max. | 8 A |
— up to 50 °C, max. | 6 A |
— up to 60 °C, max. | 4 A |
vertical installation | |
— up to 30 °C, max. | 8 A |
— up to 40 °C, max. | 6 A |
— up to 50 °C, max. | 4 A |
— up to 60 °C, max. | 4 A |
Cable length | |
● shielded, max. | 1 000 m |
● unshielded, max. | 600 m |
Isochronous mode | |
Isochronous operation (application synchronized up to terminal) | No |
Interrupts/diagnostics/status information | |
Diagnostics function | Yes |
Substitute values connectable | Yes |
Alarms | |
● Diagnostic alarm | Yes |
Diagnostic messages | |
● Monitoring the supply voltage | Yes |
● Wire-break | Yes; Module-wise |
● Short-circuit to M | Yes; Module-wise |
● Short-circuit to L+ | Yes; Module-wise |
● Group error | Yes |
Diagnostics indication LED |
|
● Monitoring of the supply voltage (PWR-LED) | Yes; Green PWR LED |
● Channel status display | Yes; Green LED |
● for channel diagnostics | No |
● for module diagnostics | Yes; green/red DIAG LED |
Potential separation | |
Potential separation channels | |
● between the channels | No |
● between the channels and backplane bus | Yes |
● between the channels and the power supply of the electronics | No |
Isolation | |
Isolation tested with | 707 V DC (type test) |
Standards, approvals, certificates | |
Suitable for safety functions | No |
Suitable for safety-related tripping of standard modules | Yes; From FS03 |
Highest safety class achievable in safety mode | |
● Performance level according to ISO 13849-1 | PL d |
● SIL acc. to IEC 61508 | SIL 2 |
Ambient conditions | |
Ambient temperature during operation | |
● horizontal installation, min. | 0 °C |
● horizontal installation, max. | 60 °C |
● vertical installation, min. | 0 °C; in all other mounting positions |
● vertical installation, max. | 50 °C; in all other mounting positions |
Altitude during operation relating to sea level | |
● Ambient air temperature-barometric pressurealtitude | On request: Negative ambient temperature down to -30 °C
(without condensation), installation altitudes between 2 000 m and 5 000 m |
Dimensions | |
Width | 15 mm |
Height | 73 mm |
Depth | 58 mm |
SIEMENS Digital Output Module 6ES7132-6BH00-0BA0 |
Be the first to review “Digital Output Module 6ES7132-6BH00-0BA0”
-
منبع تغذیه 24 ولت 80 آمپر مین ول
0 تومانRSP-2000-24 توان و قدرت منبع تغذیه RSP2000 برابر با 24 ولت و 80 آمپر اندازه گیری شده است. این منبع تغذیه قابلیت این را دارد که به طور همزمان بتواند 4 دستگاه را پارالل نماید، یعنی این منبع جزو معدود منبع هایی است که می تواند در پکیج ها نصب شده و با ولتاژ 24 ولت و جریان 320 امپر فعالیت نماید. -
منبع تغذیه 48 ولت 2.3 آمپر مین ول
0 تومانمنبع تغذیه 48 ولت 2.3 آمپر مین ول با توان اندازه گیری شده 110.4 وات در خروجی محاسبه شده است. این منبع تغذیه در دسته پاور های کف خواب شرکت مین ول قرار می گیرند. این منبع تغذیه سوئیچینگ این قابلیت دارد که به مدت 5 ثانیه ولتاژ ورودی تا 300 ولت را تحمل کند. راندمان در منبع تغذیه 48 ولت 2.3 آمپر به 91% می رسد که به راحتی… -
منبع تغذیه چهار خروجی مین ول
0 تومانمنبع تغذیه 5 ولت 8 آمپر مین ول با توان 124 وات در خروجی در اختیار کاربر قرار می گیرد. همچنین این منبع تغذیه (سری D) دارای سه خروجی مثبت 12 و منفی 12 و 24 ولت می باشد. راندمان یا بازدهی در این منبع تغذیه به عدد بالای 80 درصد می رسد. که بسیار کارآمد می باشد. سری RQ-125C شامل چهار دستهB,C و D می شود: سری B دارای… -
منبع تغذیه 24 ولت 3.2 آمپر ریلی
تماس بگیریدمنبع تغذیه 24 ولت 3.2 آمپر وی وی ( dr-75-24 ) با توان 75 وات می باشد.این پاور در دسته ی منبع تغذیه های ریلی این شرکت قرار می گیرد.منبع تغذیه DR-75 قابلیت نصب بر روی ریل های استاندارد TS-35 / 7.5 یا TS-35 / 15 دارد.این سوئیچینگ با بدنه ای از جنس گالوانیزه و طراحی مشبکی ساخته شده است.بدنه این منبع تغذیه از مقاومت بالایی در محیط های صنعتی… -
منبع تغذیه 12 ولت 17 آمپر مین ول
1,000 تومانمنبع تغذیه 12 ولت 17 آمپر مین ول (LRS-200-12) با توان و قدرت 204 وات در خروجی انداره گیری شده است. سوئیچینگ مین ول سری LRS-200-12 جزء درسته کف خواب محصولات شرکت مین ول محسوب می شود. این منبع تغذیه توانای تحمل ولتاژ ورودی تا 300 را تا 5ثانیه دارد. راندمان در این منبع تغذیه تا 87.5% اندازه گیری شده است که بسیار بالا و کاربردی می باشد. تلفات در… -
منبع تغذیه 24 ولت 10 آمپر مین ول
0 تومانمنبع تغذیه 24ولت 10آمپر مین ول با توان 240وات واقعی در خروجی در اختیار کاربران قرار می گیرد. منبع تغذیه سوئیچینگ سری SDR-240-24 در دسته ریلی محصولات شرکت مین ول قرار می گیرد. راندمان در این منبع تغذیه سوئیچینگ به عدد بالای 94% می رسد که بسیار به مقدار ایده آل خود نزدیک است. در این منبع تغذیه از سیستم PFC یا مدار اصلاح ضریب قدرت استفاده شده است.
Reviews
There are no reviews yet.