نقد و بررسی : Digital Input Module 6ES7131-6BH00-0BA0
Digital Input Module 6ES7131-6BH00-0BA0 SIEMENS
*** Spare part *** SIMATIC ET 200SP SIEMENS , digital input module, DI 16X 24 V DC Standard, suitable for BU type A0, color code CC00, module diagnostics
SIEMENS | |||
General information |
|||
Product type designation | DI 16×24 VDC ST | ||
Firmware version
● FW update possible |
V1.1 | ||
Yes | |||
usable BaseUnits | BU type A0 | ||
Color code for module-specific color identification plate | CC00 | ||
Product function | |||
● I&M data | Yes; I&M0 to I&M3 | ||
Engineering with | |||
● STEP 7 TIA Portal configurable/integrated as of version | V13 SP1 | ||
● STEP 7 configurable/integrated as of version | V5.5 / –
|
||
● PCS 7 configurable/integrated as of version | |||
● PROFIBUS as of GSD version/GSD revision | |||
● PROFINET as of GSD version/GSD revision | GSDML V2.3 | ||
Operating mode | |||
● DI | Yes | ||
● Counter | No |
● Oversampling | No
No |
● MSI | |
Supply voltage | |
Rated value (DC) | 24 V |
permissible range, lower limit (DC) | 19.2 V |
permissible range, upper limit (DC) | 28.8 V |
Reverse polarity protection | Yes |
Input current | |
Current consumption, max. | 90 mA |
Encoder supply | |
Short-circuit protection | No |
24 V encoder supply | |
● 24 V | No |
● Short-circuit protection | No |
Power loss | |
Power loss, typ. | 1.7 W |
Address area | |
Address space per module | |
● Address space per module, max. | 2 byte; + 2 bytes for QI information |
Hardware configuration | |
Automatic encoding | |
● Mechanical coding element | Yes |
Selection of BaseUnit for connection variants | |
● 1-wire connection | BU type A0 |
● 2-wire connection | BU type A0 + external terminals |
● 3-wire connection | BU type A0 + external terminals |
● 4-wire connection | BU type A0 + external terminals |
Digital inputs |
|
Number of digital inputs | 16 |
Source/sink input | P-reading |
Input characteristic curve in accordance with IEC 61131, type 1 | Yes |
Input characteristic curve in accordance with IEC 61131, type 2 | No |
Input characteristic curve in accordance with IEC 61131, type 3 | Yes |
Pulse extension | No |
Input voltage | |
● Rated value (DC) | 24 V |
● for signal “0” | -30 to +5 V |
● for signal “1” | +11 to +30V |
Input current | |
● for signal “1”, typ. | 2.5 mA |
Input delay (for rated value of input voltage) | |
for standard inputs | |
— parameterizable | Yes; 0.05 / 0.1 / 0.4 / 0.8 / 1.6 / 3.2 / 12.8 / 20 ms (in each case + delay of 30 to 500 µs, depending on line length) |
— at “0” to “1”, min. | 0.05 ms |
— at “0” to “1”, max. | 20 ms |
— at “1” to “0”, min. | 0.05 ms |
— at “1” to “0”, max. | 20 ms |
for interrupt inputs | |
— parameterizable | No |
for technological functions | |
— parameterizable | No |
Cable length | |
● shielded, max. | 1 000 m |
● unshielded, max. | 600 m |
Encoder |
|
Connectable encoders | |
● 2-wire sensor | Yes |
— permissible quiescent current (2-wire sensor), max. | 1.5 mA |
Isochronous mode | |
Isochronous operation (application synchronized up to terminal) | No |
Interrupts/diagnostics/status information | |
Diagnostics function | Yes |
Alarms | |
● Diagnostic alarm | Yes |
Diagnostic messages | |
● Diagnostic information readable | Yes |
● Monitoring the supply voltage | Yes |
— parameterizable | Yes |
● Monitoring of encoder power supply | No |
● Wire-break | Yes; Module-by-module, optional protective circuit for preventing wire-break diagnostics in the case of simple encoder contacts: 25 kOhm to 45 kOhm |
● Short-circuit | No |
● Group error | Yes |
Diagnostics indication LED |
Be the first to review “Digital Input Module 6ES7131-6BH00-0BA0”
-
سنسور القایی OMRON E2B-M12LN08-M1-B1 امرن
تماس بگیرید◀️ نوع محصول : سنسور امرن / القایی / مجاورتی ◀️ قطر سنسور : استوانه ای قطر 12 ◀️ خروجی سنسور : PNP NO -
درایو 11 کیلووات کلوز 75آمپر کیوما QMA Q1200N
0 توماناینورتر های شرکت QMA Electronics چین بر اساس موتور های گیربکسی طراحی شده و به صورت تخصصی بر روی آسانسور و بالابر پیاده سازی شده است .درایو کنترل دور موتور آسانسور qma کیوما چین که در صنعت آسانسور ایران نام شناخته شده ای می باشد. در انواع مختلف OPEN و CLOSE طراحی و ساخته شده است -
اينورتر 2.2 کیلووات سه فاز اینوت invt سری GD270
7,880,000 تومانآی سی اِس شاپ ارائه دهنده اینورتر invt با ماهمراه باشید با معرفی مشخصات درایو 2.2 کیلووات سه فاز اینوت invt سری GD270 درایو تخصصی پمپ و فن 🔺 برند : اینوت invt 🔺 نوع محصول : اينورتر 2.2 کیلووات سه فاز 🔺 کد فنی اینورتر : GD270-2R2-4 🔺 سری اینورتر : اينورتر GD270 -
Push-in terminals 6ES7193-6BP20-0DA0
تماس بگیریدSIMATIC ET 200SP, BaseUnit BU15-P16+A10+2D, BU type A0, Push-in terminals, with 10 AUX terminals, New load group, WxH: 15 mmx141 mm -
منبع تغذیه 48 ولت 42 آمپر مین ول
0 تومانمنبع تغذیه 48 ولت 42 آمپر مین ول سری 48 RSP 2000 با توان 2016 وات واقعی در خروجی اندازه گیری شده است. یک از قابلیت های برجسته ی این سری از منبع تغذیه ها مین ول امکان موازی کردن تا چهار دستگاه با یک دیگر است به طوری که بتوان در خروجی با همان ولتاژ 48 ولت، جریان را حداکثر تا 168 آمپر افزایش دارد. -
اینورتر 400 وات سینوسی مین ول
0 توماناینورتر (مبدل DC به AC) 220 ولت مین ول با توان 400 وات در خروجی اندازه گیری شده است. خروجی این اینورتر به صورت کاملا سینوسی و دقیق با ضریب خطا بسیار کم (THD < 0.3%) می باشد. توانایی تحمل سرج لحظه ای در این مبدل در زمان جریان کشی اولیه تا 800 وات می رسد. همچنین راندمان در مبدل DC به AC 400 وات به عدد بالای 88.5 درصد…
Reviews
There are no reviews yet.