نقد و بررسی : Digital Input Module 6ES7131-6BH00-0BA0
Digital Input Module 6ES7131-6BH00-0BA0 SIEMENS
*** Spare part *** SIMATIC ET 200SP SIEMENS , digital input module, DI 16X 24 V DC Standard, suitable for BU type A0, color code CC00, module diagnostics
SIEMENS | |||
General information |
|||
Product type designation | DI 16×24 VDC ST | ||
Firmware version
● FW update possible |
V1.1 | ||
Yes | |||
usable BaseUnits | BU type A0 | ||
Color code for module-specific color identification plate | CC00 | ||
Product function | |||
● I&M data | Yes; I&M0 to I&M3 | ||
Engineering with | |||
● STEP 7 TIA Portal configurable/integrated as of version | V13 SP1 | ||
● STEP 7 configurable/integrated as of version | V5.5 / –
|
||
● PCS 7 configurable/integrated as of version | |||
● PROFIBUS as of GSD version/GSD revision | |||
● PROFINET as of GSD version/GSD revision | GSDML V2.3 | ||
Operating mode | |||
● DI | Yes | ||
● Counter | No |
● Oversampling | No
No |
● MSI | |
Supply voltage | |
Rated value (DC) | 24 V |
permissible range, lower limit (DC) | 19.2 V |
permissible range, upper limit (DC) | 28.8 V |
Reverse polarity protection | Yes |
Input current | |
Current consumption, max. | 90 mA |
Encoder supply | |
Short-circuit protection | No |
24 V encoder supply | |
● 24 V | No |
● Short-circuit protection | No |
Power loss | |
Power loss, typ. | 1.7 W |
Address area | |
Address space per module | |
● Address space per module, max. | 2 byte; + 2 bytes for QI information |
Hardware configuration | |
Automatic encoding | |
● Mechanical coding element | Yes |
Selection of BaseUnit for connection variants | |
● 1-wire connection | BU type A0 |
● 2-wire connection | BU type A0 + external terminals |
● 3-wire connection | BU type A0 + external terminals |
● 4-wire connection | BU type A0 + external terminals |
Digital inputs |
|
Number of digital inputs | 16 |
Source/sink input | P-reading |
Input characteristic curve in accordance with IEC 61131, type 1 | Yes |
Input characteristic curve in accordance with IEC 61131, type 2 | No |
Input characteristic curve in accordance with IEC 61131, type 3 | Yes |
Pulse extension | No |
Input voltage | |
● Rated value (DC) | 24 V |
● for signal “0” | -30 to +5 V |
● for signal “1” | +11 to +30V |
Input current | |
● for signal “1”, typ. | 2.5 mA |
Input delay (for rated value of input voltage) | |
for standard inputs | |
— parameterizable | Yes; 0.05 / 0.1 / 0.4 / 0.8 / 1.6 / 3.2 / 12.8 / 20 ms (in each case + delay of 30 to 500 µs, depending on line length) |
— at “0” to “1”, min. | 0.05 ms |
— at “0” to “1”, max. | 20 ms |
— at “1” to “0”, min. | 0.05 ms |
— at “1” to “0”, max. | 20 ms |
for interrupt inputs | |
— parameterizable | No |
for technological functions | |
— parameterizable | No |
Cable length | |
● shielded, max. | 1 000 m |
● unshielded, max. | 600 m |
Encoder |
|
Connectable encoders | |
● 2-wire sensor | Yes |
— permissible quiescent current (2-wire sensor), max. | 1.5 mA |
Isochronous mode | |
Isochronous operation (application synchronized up to terminal) | No |
Interrupts/diagnostics/status information | |
Diagnostics function | Yes |
Alarms | |
● Diagnostic alarm | Yes |
Diagnostic messages | |
● Diagnostic information readable | Yes |
● Monitoring the supply voltage | Yes |
— parameterizable | Yes |
● Monitoring of encoder power supply | No |
● Wire-break | Yes; Module-by-module, optional protective circuit for preventing wire-break diagnostics in the case of simple encoder contacts: 25 kOhm to 45 kOhm |
● Short-circuit | No |
● Group error | Yes |
Diagnostics indication LED |
Be the first to review “Digital Input Module 6ES7131-6BH00-0BA0”
-
منبع تغذیه 24 ولت 13.4 آمپر مین ول
0 تومانمنبع تغذیه 24 ولت 13.4 آمپر مین ول (RSP-320-24) با توان 320 وات اندازه گیری شده در خروجی می باشد. منبع تغذیه 24 ولت مین ول در دسته منبع تغذیه های کف خواب این شرکت قرار می گیرد. راندمان در این منبع تغذیه به 89% میرسد که مقدار قابل توجهی می باشد. این منبع تغذیه دارای مدار اصلاح ضریب قدرت یا PFC می باشد. -
منبع تغذیه 5 ولت 20 آمپر مین ول
تماس بگیریدمنبع تغذیه 5 ولت 120 آمپر NES-100-5 مین ول با توان اندازه گیری شدهً 102 وات در خروجی محاسبه شده است. این منبع تغذیه در دسته پاور های کف خواب شرکت مین ول قرا می گیرند. این پاور سوئیچینگ ضخامت کمی در حدود 30 میلی متر دارد. -
منبع تغذیه 12 ولت 29 آمپر مین ول
تماس بگیریدمنبع تغذیه 12 ولت 29 آمپر NES-350-12 مین ول با توان اندازه گیری شده 384 وات در خروجی محاسبه شده است. این منبع تغذیه در دسته پاور های کف خواب شرکت مین ول قرار می گیرند. راندمان در منبع تغذیه 12 ولت 29 آمپر به 85% می رسد که به راحتی پاسخگوی نیاز کاربران است. تلفات در این منبع تغذیه بسیار کم بوده به طوری که در زمان بی باری… -
مبدل 24 به 24 ولت 4.2 آمپر مین ول
0 تومانکانورتر 24 ولت 4.2 آمپر (SD-100B-24) مین ول با توان و قدرت 100.8 وات در خروجی اندازه گیری شده است. این کانورتر در دسته مبدل های DC به DC کف خواب شرکت مین ول قرار می گیرد. راندمان این منبع تغذیه (SD-100B-24) تا 78 در صد افزایش پیدا می کند که این مقدار پاسخگو نیاز کاربر می باشد. این مبدل DC به DC (کانورتر) در فیلتر EMI ساخته شده است.… -
درایو 11 کیلووات سه فاز دانفوس Danfoss
تماس بگیریداینورتر11کیلووات دانفوس ، درایوی چند منظوره است که در حال حاضر تا توان 11کیلووات تولید می شود. پانل کنترلی این سری را می توان مستقیما روی درایو نصب کرد یا از طریق یک کابل مخصوص در جایی دیگر نصب نمود. همچنین با استفاده از این پانل می توان برنامه یک درایو را در درایو دیگر کپی کرد. اگر پانل در دسترس نباشد، می توان با اتصال یک کامپیوتر به درایو… -
منبع تغذیه 5 ولت 5 آمپر مین ول
0 تومانمنبع تغذیه 5 ولت 5 آمپر (RS-25-5) مین ول با توان و قدرت اندازه گیری شده در خروجی برابر 25.2 وات می باشد. منبع تغذیه سوئیچینگ 5 ولت مین ول سری RS-25 جزء محصولات کف خواب این شرکت است. راندمان در این منبع تغذیه 81.5% است که به خوبی پاسخگوی نیاز کاربر می باشد. تلفات در این منبع تغذیه کم بوده و در حالت بی باری به کمتر از 0.5…
Reviews
There are no reviews yet.