نقد و بررسی : Digital Input Module 6ES7131-6BH00-0BA0
Digital Input Module 6ES7131-6BH00-0BA0 SIEMENS
*** Spare part *** SIMATIC ET 200SP SIEMENS , digital input module, DI 16X 24 V DC Standard, suitable for BU type A0, color code CC00, module diagnostics
SIEMENS | |||
General information |
|||
Product type designation | DI 16×24 VDC ST | ||
Firmware version
● FW update possible |
V1.1 | ||
Yes | |||
usable BaseUnits | BU type A0 | ||
Color code for module-specific color identification plate | CC00 | ||
Product function | |||
● I&M data | Yes; I&M0 to I&M3 | ||
Engineering with | |||
● STEP 7 TIA Portal configurable/integrated as of version | V13 SP1 | ||
● STEP 7 configurable/integrated as of version | V5.5 / –
|
||
● PCS 7 configurable/integrated as of version | |||
● PROFIBUS as of GSD version/GSD revision | |||
● PROFINET as of GSD version/GSD revision | GSDML V2.3 | ||
Operating mode | |||
● DI | Yes | ||
● Counter | No |
● Oversampling | No
No |
● MSI | |
Supply voltage | |
Rated value (DC) | 24 V |
permissible range, lower limit (DC) | 19.2 V |
permissible range, upper limit (DC) | 28.8 V |
Reverse polarity protection | Yes |
Input current | |
Current consumption, max. | 90 mA |
Encoder supply | |
Short-circuit protection | No |
24 V encoder supply | |
● 24 V | No |
● Short-circuit protection | No |
Power loss | |
Power loss, typ. | 1.7 W |
Address area | |
Address space per module | |
● Address space per module, max. | 2 byte; + 2 bytes for QI information |
Hardware configuration | |
Automatic encoding | |
● Mechanical coding element | Yes |
Selection of BaseUnit for connection variants | |
● 1-wire connection | BU type A0 |
● 2-wire connection | BU type A0 + external terminals |
● 3-wire connection | BU type A0 + external terminals |
● 4-wire connection | BU type A0 + external terminals |
Digital inputs |
|
Number of digital inputs | 16 |
Source/sink input | P-reading |
Input characteristic curve in accordance with IEC 61131, type 1 | Yes |
Input characteristic curve in accordance with IEC 61131, type 2 | No |
Input characteristic curve in accordance with IEC 61131, type 3 | Yes |
Pulse extension | No |
Input voltage | |
● Rated value (DC) | 24 V |
● for signal “0” | -30 to +5 V |
● for signal “1” | +11 to +30V |
Input current | |
● for signal “1”, typ. | 2.5 mA |
Input delay (for rated value of input voltage) | |
for standard inputs | |
— parameterizable | Yes; 0.05 / 0.1 / 0.4 / 0.8 / 1.6 / 3.2 / 12.8 / 20 ms (in each case + delay of 30 to 500 µs, depending on line length) |
— at “0” to “1”, min. | 0.05 ms |
— at “0” to “1”, max. | 20 ms |
— at “1” to “0”, min. | 0.05 ms |
— at “1” to “0”, max. | 20 ms |
for interrupt inputs | |
— parameterizable | No |
for technological functions | |
— parameterizable | No |
Cable length | |
● shielded, max. | 1 000 m |
● unshielded, max. | 600 m |
Encoder |
|
Connectable encoders | |
● 2-wire sensor | Yes |
— permissible quiescent current (2-wire sensor), max. | 1.5 mA |
Isochronous mode | |
Isochronous operation (application synchronized up to terminal) | No |
Interrupts/diagnostics/status information | |
Diagnostics function | Yes |
Alarms | |
● Diagnostic alarm | Yes |
Diagnostic messages | |
● Diagnostic information readable | Yes |
● Monitoring the supply voltage | Yes |
— parameterizable | Yes |
● Monitoring of encoder power supply | No |
● Wire-break | Yes; Module-by-module, optional protective circuit for preventing wire-break diagnostics in the case of simple encoder contacts: 25 kOhm to 45 kOhm |
● Short-circuit | No |
● Group error | Yes |
Diagnostics indication LED |
Be the first to review “Digital Input Module 6ES7131-6BH00-0BA0”
-
منبع تغذیه 24 ولت 2 آمپر مین ول
0 تومانمنبع تغذیه 24 ولت 2 آمپر مین ول (DR-45-24) با توان خروجی 48 وات واقعی اندازه گیری شده است. این منبع تغذیه سوئیچینگ مین ول در دسته محصولات ریلی این شرکت تایوانی قرار می گیرد.ر اندمان در این منبع تغذیه به عدد بالای 80% می رسد که پاسخ گو نیاز های کاربر می باشد. ولتاژ خروجی سری DR-45 دارای پوشش نسبتا کاملی از 5 ولت تا 24 ولت می باشد. -
منبع تغذیه 48 ولت 9.4 آمپر مین ول
0 تومانمنبع تغذیه 48 ولت 9.4 آمپر مین ول (SE-450-48) با توان و قدرت 450 وات واقعی اندازه گیری شده است. این منبع تغذیه سوئیچینگ در دسته محصولات کف خواب این شرکت تایوانی قرار می گیرد. ولتاژ ورودی در سوئیچینگ 48 ولت 9.4 آمپر از طریق سوئیچ توسط کاربر انتخاب می شود. راندمان در این منبع تغذیه به عدد بالای 86% می رسد که به راحتی پاسخگوی نیاز کار می باشد. -
اینورتر 3 کیلووات اشنایدر سری ATV310 ورودی سه فاز
تماس بگیرید[gravityform id="9" title="true" description="true"] -
منبع تغذیه ۲۴ ولت ۵ آمپر امرن Omron
0 تومانمنبع تغذیه 24 ولت 5 آمپر اومرون (S8VK-C12024) با توان 120 وات واقعی و تحویلی به مصرف کننده ساخته شده است. منبع تغذیه جزء محصولات ریلی شرکت امرون محسوب می شود . این منابع تغذیه دارای دو ست خروجی بوده که عملکرد سیم بندی را آسان می نماید. دمای عملیاتی منفی 40 تا 70 درجه سلسیوس گستره ولتاژ ورودی از 100 تا 240 ولت AC و 90 تا 350 ولت… -
منبع تغذیه 24 ولت 20 آمپر(ورودی380ولت) مین ول
0 تومانمنبع تغذیه 24 ولت 20 آمپر مین ول با توان اندازه گیری شده 480 وات واقعی در خروجی در اختیار کاربر است. این منبع تغذیه سوئیچینگ در دسته محصولات ریلی این شرکت قرار می گیرد. منبع تغذیه TDR-480-24 توانایی شروع به کار با ولتاژ سه فاز و دو فاز را دارد. راندمان بالا تا 93% و مصرف کم توان در حالت بی باری از ویژگی های این محصول به حساب… -
منبع تغذیه 15 ولت 4 آمپر مین ول
0 تومانمنبع تغذیه 15 ولت 4 آمپر مین ول (DR-60-15) با توان 60 وات واقعی در خروجی اندازه گیری شده است. این پاور در دسته ی منبع تغذیه های ریلی شرکت مین ول قرار می گیرد. راندمان کاری در این منبع تغذیه به عدد بالای 82 درصد می رسد که بسیار کاربردی ست. توان مصرفی در این منبع تغذیه بسیار کم است به طوری که کل توان تولید به خروجی انتقال…
Reviews
There are no reviews yet.