Analog Input Module 6ES7134-6GF00-0AA1

Analog Input Module 6ES7134-6GF00-0AA1


تماس بگیرید

بررسی اجمالی محصول

SIMATIC ET 200SP, Analog input module , AI 8XI 2-/4-wire Basic, suitable for BU type A0, A1, Color code CC01, Module diagnostics, 16 bit

جهت ارائه خدمات همکاری از قبیل تخفیف همکاری , لیست قیمت و…

خدمات همکاری آی سی اِس شاپـــــــ شامل تامین لوازم و تجهیزات صنعتی (برندهای مطرح دنیا) ، ارائه گارانتی و تعمیر فوری محصولات , مشاوره به همکاران گرامی , ارائه تخفیف همکاری و یا ارسال رایگان محصولات می باشد . (همکاری شمارتو وارد کن تا فرم ثبت نام برات ارسال بشه )

نقد و بررسی : Analog Input Module 6ES7134-6GF00-0AA1

Analog Input Module 6ES7134-6GF00-0AA1

SIMATIC ET 200SP, Analog Input Module , AI 8XI 2-/4-wire Basic, suitable for BU type A0, A1, Color code CC01, Module diagnostics, 16 bit

SIEMENS

General information

Product type designation AI 8xI 2-/4-wire BA
HW functional status from FS04
Firmware version

● FW update possible

Yes
usable BaseUnits BU type A0, A1
Color code for module-specific color identification plate CC01
Product function
● I&M data Yes; I&M0 to I&M3
● Measuring range scalable No
Engineering with
● STEP 7 TIA Portal configurable/integrated as of version V13 SP1
● STEP 7 configurable/integrated as of version V5.5 SP3 / –
● PROFIBUS as of GSD version/GSD revision GSD Revision 5
● PROFINET as of GSD version/GSD revision GSDML V2.3
Operating mode
● Oversampling No
● MSI No
CiR – Configuration in RUN
Reparameterization possible in RUN Yes
Calibration possible in RUN No
Supply voltage
Rated value (DC) 24 V
permissible range, lower limit (DC) 19.2 V
permissible range, upper limit (DC) 28.8 V
Reverse polarity protection Yes

Input current

Current consumption, max. 25 mA; without sensor supply
Encoder supply
24 V encoder supply
● 24 V Yes
● Short-circuit protection Yes
● Output current, max. 0.7 A; total current of all encoders/channels
Power loss
Power loss, typ. 0.7 W; Without encoder supply voltage
Address area
Address space per module
● Address space per module, max. 16 byte
Hardware configuration
Automatic encoding
● Mechanical coding element Yes
Selection of BaseUnit for connection variants
● 1-wire connection BU type A0, A1
● 2-wire connection BU type A0, A1
● 4-wire connection BU type A0, A1 + potential distributor module
Analog inputs
Number of analog inputs 8; Single-ended
● For current measurement 8
permissible input current for current input (destruction limit), max. 50 mA
Cycle time (all channels), min. 1 ms; per channel
Input ranges (rated values), currents
● 0 to 20 mA Yes
● Input resistance (0 to 20 mA) 100 Ω; 15 bit
● -20 mA to +20 mA Yes
● Input resistance (-20 mA to +20 mA) 100 Ω; 16 bit incl. sign
● 4 mA to 20 mA Yes

100 Ω; 15 bit

● Input resistance (4 mA to 20 mA)
Cable length
● shielded, max. 200 m
Analog value generation for the inputs
Integration and conversion time/resolution per channel
● Resolution with overrange (bit including sign), max. 16 bit
● Integration time, parameterizable Yes
● Interference voltage suppression for interference frequency f1 in Hz 16.67 / 50 / 60 / 4 800 (16.67 / 50 / 60)
● Conversion time (per channel) 180 / 60 / 50 / 0.625 (67.5 / 22.5 / 18.75) ms
Smoothing of measured values
● Number of smoothing levels 4; None; 4/8/16 times
● parameterizable Yes

Encoder

Connection of signal encoders
● for voltage measurement No
● for current measurement as 2-wire transducer Yes
— Burden of 2-wire transmitter, max. 650 Ω
● for current measurement as 4-wire transducer Yes
Errors/accuracies
Linearity error (relative to input range), (+/-) 0.01 %
Temperature error (relative to input range), (+/-) 0.005 %/K
Crosstalk between the inputs, min. 50 dB
Repeat accuracy in steady state at 25 °C (relative to input range), (+/-) 0.05 %
Operational error limit in overall temperature range
● Current, relative to input range, (+/-) 0.5 %
Basic error limit (operational limit at 25 °C)
● Current, relative to input range, (+/-) 0.3 %
Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency
● Series mode interference (peak value of interference < rated value of input range), min. 70 dB; With conversion time 67.5 / 22.5 / 18.75 ms: 40 dB
Isochronous mode
Isochronous operation (application synchronized up to terminal) No
Interrupts/diagnostics/status information
Diagnostics function Yes
Alarms
● Diagnostic alarm Yes
● Limit value alarm No
Diagnostic messages
● Monitoring the supply voltage Yes
● Wire-break Yes; at 4 to 20 mA
● Short-circuit Yes; Sensor supply to M; module by module
● Group error Yes
● Overflow/underflow Yes
Diagnostics indication LED
● Monitoring of the supply voltage (PWR-LED) Yes; Green LED
● Channel status display Yes; Green LED
● for channel diagnostics No
● for module diagnostics Yes; green/red DIAG LED
Potential separation
Potential separation channels
● between the channels No
● between the channels and backplane bus Yes
● between the channels and the power supply of the electronics No

Isolation

Isolation tested with 707 V DC (type test)
Ambient conditions
Ambient temperature during operation
● horizontal installation, min. -30 °C
● horizontal installation, max. 60 °C
● vertical installation, min. -30 °C
● vertical installation, max. 50 °C
Altitude during operation relating to sea level
● Installation altitude above sea level, max. 5 000 m; Restrictions for installation altitudes > 2 000 m, see manual
Dimensions
Width 15 mm
Height 73 mm
Depth 58 mm
Weights
Weight, approx. 31 g
last modified: 01/20/2020

SIEMENS Analog Input Module 6ES7134-6GF00-0AA1

Reviews

There are no reviews yet.

Be the first to review “Analog Input Module 6ES7134-6GF00-0AA1”

  • منبع تغذیه knx-20e-640 مین ول

    تومان
    [gravityform id="9" title="true" description="true"] منبع تغذیه KNX-20E-640 یک منبع تغذیه 640 میلی آمپری با بازده بالا و ابعاد کوچک فقط 52.5 میلی متر است.دستگاه دارای خروجی چوک باس KNX و یک خروجی اضافی برای انرژی جانبی استنشانگرهای LED در صورت عملکرد طبیعی ، شرایط اضافه بار و عملکرد RESET استفاده می شوند.دستگاه مجهز به یک دکمه فشار تنظیم مجدد ، سه LED و بلوک ترمینال برای AC و خروجی جانبی…
  • منبع تغذیه 5 ولت 10 آمپر مین ول

    تومان
    منبع تغذیه 5 ولت 10 آمپر مین ول (LRS-50-5) با توان و قدرت 52.8 وات در خروجی انداره گیری شده است. سوئیچینگ مین ول سری LRS-50-5 جزء درسته کف خواب محصولات این شرکت محسوب می شود. این منبع تغذیه توانای تحمل ولتاژ ورودی تا 300 را تا 5 ثانیه دارد. راندمان در این منبع تغذیه تا 90% اندازه گیری شده است که بسیار بالا و کاربردی می باشد. تلفات در…
  • PROFINET Interface Module 6ES7155-6AU00-0CN0

    PROFINET Interface 6ES7155-6AU00-0CN0

    تماس بگیرید
    *** Spare part *** SIMATIC ET 200SP, PROFINET interface module IM 155-6PN High Feature max. 64 I/O modules, 0.25 ms isochronous mode Multi-hotswap, incl. server module
  • FC-051P15KT4E20H3

    درایو 15 کیلووات سه فاز دانفوسDanfoss

    تماس بگیرید
    اینورتر15کیلووات دانفوس ، درایوی چند منظوره است که در حال حاضر تا توان 15کیلووات تولید می شود. پانل کنترلی این سری را می توان مستقیما روی درایو نصب کرد یا از طریق یک کابل مخصوص در جایی دیگر نصب نمود. همچنین با استفاده از این پانل می توان برنامه یک درایو را در درایو دیگر کپی کرد. اگر پانل در دسترس نباشد، می توان با اتصال یک کامپیوتر به درایو…
  • اينورتر 2.2 کیلووات سه فاز اینوت invt سری GD270

    7,880,000 تومان
    آی سی اِس شاپ ارائه دهنده اینورتر invt با ماهمراه باشید با معرفی مشخصات درایو 2.2 کیلووات سه فاز اینوت invt سری GD270  درایو تخصصی پمپ و فن 🔺 برند : اینوت invt 🔺 نوع محصول : اينورتر 2.2 کیلووات سه فاز 🔺 کد فنی اینورتر : GD270-2R2-4 🔺 سری اینورتر : اينورتر GD270
  • کانورتر 24 ولت 1.1 آمپر مین ول sd-25b-24کانورتر 24 ولت 1.1 آمپر مین ول sd-25b-24

    مبدل 24 به 24 ولت 1.1 آمپر مین ول

    تومان
    مبدل 24 به 24 ولت 1.1 آمپر مین ول با توان و قدرت 26.4 وات در اختیار مصرف کننده قرار می گیرد. این منبع تغذیه DC به DC در دسته ی محصولات کف خواب شرکت مین ول قرار می گیرد. محافظت در برابر اتصال کوتاه، اضافه بار، ولتاژ بالا و درجه حرارت بالا از ویژگی های این کانورتر به شمار می رود. بازدهی (راندمان) این کانورتر به عدد بالای 78…