نقد و بررسی : Analog Input Module 6ES7134-6GF00-0AA1
Analog Input Module 6ES7134-6GF00-0AA1
SIMATIC ET 200SP, Analog Input Module , AI 8XI 2-/4-wire Basic, suitable for BU type A0, A1, Color code CC01, Module diagnostics, 16 bit
SIEMENS | |
General information |
|
Product type designation | AI 8xI 2-/4-wire BA |
HW functional status | from FS04 |
Firmware version
● FW update possible |
Yes |
usable BaseUnits | BU type A0, A1 |
Color code for module-specific color identification plate | CC01 |
Product function | |
● I&M data | Yes; I&M0 to I&M3 |
● Measuring range scalable | No |
Engineering with | |
● STEP 7 TIA Portal configurable/integrated as of version | V13 SP1 |
● STEP 7 configurable/integrated as of version | V5.5 SP3 / – |
● PROFIBUS as of GSD version/GSD revision | GSD Revision 5 |
● PROFINET as of GSD version/GSD revision | GSDML V2.3 |
Operating mode | |
● Oversampling | No |
● MSI | No |
CiR – Configuration in RUN | |
Reparameterization possible in RUN | Yes |
Calibration possible in RUN | No |
Supply voltage | |
Rated value (DC) | 24 V |
permissible range, lower limit (DC) | 19.2 V |
permissible range, upper limit (DC) | 28.8 V |
Reverse polarity protection | Yes |
Input current |
|
Current consumption, max. | 25 mA; without sensor supply |
Encoder supply | |
24 V encoder supply | |
● 24 V | Yes |
● Short-circuit protection | Yes |
● Output current, max. | 0.7 A; total current of all encoders/channels |
Power loss | |
Power loss, typ. | 0.7 W; Without encoder supply voltage |
Address area | |
Address space per module | |
● Address space per module, max. | 16 byte |
Hardware configuration | |
Automatic encoding | |
● Mechanical coding element | Yes |
Selection of BaseUnit for connection variants | |
● 1-wire connection | BU type A0, A1 |
● 2-wire connection | BU type A0, A1 |
● 4-wire connection | BU type A0, A1 + potential distributor module |
Analog inputs | |
Number of analog inputs | 8; Single-ended |
● For current measurement | 8 |
permissible input current for current input (destruction limit), max. | 50 mA |
Cycle time (all channels), min. | 1 ms; per channel |
Input ranges (rated values), currents | |
● 0 to 20 mA | Yes |
● Input resistance (0 to 20 mA) | 100 Ω; 15 bit |
● -20 mA to +20 mA | Yes |
● Input resistance (-20 mA to +20 mA) | 100 Ω; 16 bit incl. sign |
● 4 mA to 20 mA | Yes
100 Ω; 15 bit |
● Input resistance (4 mA to 20 mA) | |
Cable length | |
● shielded, max. | 200 m |
Analog value generation for the inputs | |
Integration and conversion time/resolution per channel | |
● Resolution with overrange (bit including sign), max. | 16 bit |
● Integration time, parameterizable | Yes |
● Interference voltage suppression for interference frequency f1 in Hz | 16.67 / 50 / 60 / 4 800 (16.67 / 50 / 60) |
● Conversion time (per channel) | 180 / 60 / 50 / 0.625 (67.5 / 22.5 / 18.75) ms |
Smoothing of measured values | |
● Number of smoothing levels | 4; None; 4/8/16 times |
● parameterizable | Yes |
Encoder |
|
Connection of signal encoders | |
● for voltage measurement | No |
● for current measurement as 2-wire transducer | Yes |
— Burden of 2-wire transmitter, max. | 650 Ω |
● for current measurement as 4-wire transducer | Yes |
Errors/accuracies | |
Linearity error (relative to input range), (+/-) | 0.01 % |
Temperature error (relative to input range), (+/-) | 0.005 %/K |
Crosstalk between the inputs, min. | 50 dB |
Repeat accuracy in steady state at 25 °C (relative to input range), (+/-) | 0.05 % |
Operational error limit in overall temperature range | |
● Current, relative to input range, (+/-) | 0.5 % |
Basic error limit (operational limit at 25 °C) | |
● Current, relative to input range, (+/-) | 0.3 % |
Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency | |
● Series mode interference (peak value of interference < rated value of input range), min. | 70 dB; With conversion time 67.5 / 22.5 / 18.75 ms: 40 dB |
Isochronous mode | |
Isochronous operation (application synchronized up to terminal) | No |
Interrupts/diagnostics/status information | |
Diagnostics function | Yes |
Alarms | |
● Diagnostic alarm | Yes |
● Limit value alarm | No |
Diagnostic messages | |
● Monitoring the supply voltage | Yes |
● Wire-break | Yes; at 4 to 20 mA |
● Short-circuit | Yes; Sensor supply to M; module by module |
● Group error | Yes |
● Overflow/underflow | Yes |
Diagnostics indication LED | |
● Monitoring of the supply voltage (PWR-LED) | Yes; Green LED |
● Channel status display | Yes; Green LED |
● for channel diagnostics | No |
● for module diagnostics | Yes; green/red DIAG LED |
Potential separation | |
Potential separation channels | |
● between the channels | No |
● between the channels and backplane bus | Yes |
● between the channels and the power supply of the electronics | No |
Isolation |
|
Isolation tested with | 707 V DC (type test) |
Ambient conditions | |
Ambient temperature during operation | |
● horizontal installation, min. | -30 °C |
● horizontal installation, max. | 60 °C |
● vertical installation, min. | -30 °C |
● vertical installation, max. | 50 °C |
Altitude during operation relating to sea level | |
● Installation altitude above sea level, max. | 5 000 m; Restrictions for installation altitudes > 2 000 m, see manual |
Dimensions | |
Width | 15 mm |
Height | 73 mm |
Depth | 58 mm |
Weights | |
Weight, approx. | 31 g |
last modified: | 01/20/2020 |
SIEMENS Analog Input Module 6ES7134-6GF00-0AA1
Be the first to review “Analog Input Module 6ES7134-6GF00-0AA1”
-
سنسور القایی OMRON E2B-M12LN08-M1-B1 امرن
تماس بگیرید◀️ نوع محصول : سنسور امرن / القایی / مجاورتی ◀️ قطر سنسور : استوانه ای قطر 12 ◀️ خروجی سنسور : PNP NO -
منبع تغذیه 24 ولت 20 آمپر مین ول
0 تومانمنبع تغذیه 24 ولت 20 آمپر مین ول با توان و قدرت 480 ولت در خروجی اندازه گیری شده است. این پاور در دسته منبع تغذیه های سوئیچینگ شرکت مین ول قرار می گیرد. راندمان این پاور به 94% می رسد که این خروجی ایده ال را مدیون استفاده از قطعات با کیفیت و طراحی سطح بالا می دانیم. تلفات در این منبع تغذیه بسیار پایین اندازه گیری شده است.… -
درایو 11 کیلووات کلوز 50آمپر کیوما QMA Q1200N
18,090,000 توماناینورتر های شرکت QMA Electronics چین بر اساس موتور های گیربکسی طراحی شده و به صورت تخصصی بر روی آسانسور و بالابر پیاده سازی شده است .درایو کنترل دور موتور آسانسور qma کیوما چین که در صنعت آسانسور ایران نام شناخته شده ای می باشد. در انواع مختلف OPEN و CLOSE طراحی و ساخته شده است -
منبع تغذیه 15 ولت 4 آمپر مین ول
0 تومانمنبع تغذیه 15 ولت 4 آمپر مین ول (DR-60-15) با توان 60 وات واقعی در خروجی اندازه گیری شده است. این پاور در دسته ی منبع تغذیه های ریلی شرکت مین ول قرار می گیرد. راندمان کاری در این منبع تغذیه به عدد بالای 82 درصد می رسد که بسیار کاربردی ست. توان مصرفی در این منبع تغذیه بسیار کم است به طوری که کل توان تولید به خروجی انتقال… -
منبع تغذیه 48 ولت 2.5 آمپر MOXA
2,400,000 تومانمنبع تغذیه 48 ولت 2.5 آمپر (DR-120-48) با توان و قدرت واقعی اندازه گیری شده 120 وات می باشد. این سری جزء محصولات ریلی این شرکت محسوب می شود. -
منبع تغذیه 12 ولت 29 آمپر مین ول
تماس بگیریدمنبع تغذیه 12 ولت 29 آمپر NES-350-12 مین ول با توان اندازه گیری شده 384 وات در خروجی محاسبه شده است. این منبع تغذیه در دسته پاور های کف خواب شرکت مین ول قرار می گیرند. راندمان در منبع تغذیه 12 ولت 29 آمپر به 85% می رسد که به راحتی پاسخگوی نیاز کاربران است. تلفات در این منبع تغذیه بسیار کم بوده به طوری که در زمان بی باری…
Reviews
There are no reviews yet.