Digital Output Module 6ES7132-6BH00-0BA0
تماس بگیرید
بررسی اجمالی محصول
*** Spare part *** SIMATIC ET 200SP, Digital Output Module , DQ 16x 24VDC/0.5A Standard, suitable for BU type A0, Color code CC00, module diagnostics
نقد و بررسی : Digital Output Module 6ES7132-6BH00-0BA0
Digital Output Module 6ES7132-6BH00-0BA0
*** Spare part *** SIMATIC ET 200SP, Digital Output Module , DQ 16x 24VDC/0.5A Standard, suitable for BU type A0, Color code CC00, module diagnostics
SIEMENS | |||
General information |
|||
Product type designation | DQ 16×24 VDC/0.5 A ST | ||
Firmware version
● FW update possible |
V1.0 | ||
Yes | |||
usable BaseUnits | BU type A0 | ||
Color code for module-specific color identification plate | CC00 | ||
Product function | |||
● I&M data | Yes; I&M0 to I&M3 | ||
Engineering with | |||
● STEP 7 TIA Portal configurable/integrated as of version | V11 SP2 / V13 | ||
● STEP 7 configurable/integrated as of version | V5.5 SP3 / –
|
||
● PCS 7 configurable/integrated as of version | |||
● PROFIBUS as of GSD version/GSD revision | |||
● PROFINET as of GSD version/GSD revision | GSDML V2.3 | ||
Operating mode | |||
● DQ | Yes | ||
● DQ with energy-saving function | No |
● PWM | No
No |
● Oversampling | |
● MSO | No |
Redundancy | |
● Redundancy capability | Yes |
Supply voltage | |
Rated value (DC) | 24 V |
permissible range, lower limit (DC) | 19.2 V |
permissible range, upper limit (DC) | 28.8 V |
Reverse polarity protection | Yes |
Input current |
|
Current consumption, max. | 60 mA; without load |
Output voltage | |
Rated value (DC) | 24 V |
Power loss | |
Power loss, typ. | 1 W |
Address area | |
Address space per module | |
● Address space per module, max. | 2 byte |
Hardware configuration | |
Automatic encoding | |
● Mechanical coding element | Yes |
Selection of BaseUnit for connection variants | |
● 1-wire connection | BU type A0 |
● 2-wire connection | BU type A0 + Potential isolation module |
● 3-wire connection | BU type A0 + Potential isolation module |
● 4-wire connection | BU type A0 + Potential isolation module |
Digital outputs | |
Type of digital output | Source output (PNP, current-sourcing) |
Number of digital outputs | 16 |
Current-sinking | No |
Current-sourcing | Yes |
Digital outputs, parameterizable | Yes |
Short-circuit protection | Yes |
● Response threshold, typ. | 0.7 to 1.3 A |
Limitation of inductive shutdown voltage to | Typ. L+ (-50 V) |
Controlling a digital input | Yes |
Switching capacity of the outputs |
|
● with resistive load, max. | 0.5 A |
● on lamp load, max. | 5 W |
Load resistance range | |
● lower limit | 48 Ω |
● upper limit | 12 kΩ |
Output current | |
● for signal “1” rated value | 0.5 A |
● for signal “0” residual current, max. | 0.1 mA |
Output delay with resistive load | |
● “0” to “1”, typ. | 50 µs |
● “1” to “0”, typ. | 100 µs |
Parallel switching of two outputs | |
● for uprating | No |
● for redundant control of a load | Yes |
Switching frequency | |
● with resistive load, max. | 100 Hz |
● with inductive load, max. | 2 Hz |
● on lamp load, max. | 10 Hz |
Total current of the outputs | |
● Current per channel, max. | 0.5 A |
● Current per module, max. | 8 A |
Total current of the outputs (per module) | |
horizontal installation | |
— up to 30 °C, max. | 8 A |
— up to 40 °C, max. | 8 A |
— up to 50 °C, max. | 6 A |
— up to 60 °C, max. | 4 A |
vertical installation | |
— up to 30 °C, max. | 8 A |
— up to 40 °C, max. | 6 A |
— up to 50 °C, max. | 4 A |
— up to 60 °C, max. | 4 A |
Cable length | |
● shielded, max. | 1 000 m |
● unshielded, max. | 600 m |
Isochronous mode | |
Isochronous operation (application synchronized up to terminal) | No |
Interrupts/diagnostics/status information | |
Diagnostics function | Yes |
Substitute values connectable | Yes |
Alarms | |
● Diagnostic alarm | Yes |
Diagnostic messages | |
● Monitoring the supply voltage | Yes |
● Wire-break | Yes; Module-wise |
● Short-circuit to M | Yes; Module-wise |
● Short-circuit to L+ | Yes; Module-wise |
● Group error | Yes |
Diagnostics indication LED |
|
● Monitoring of the supply voltage (PWR-LED) | Yes; Green PWR LED |
● Channel status display | Yes; Green LED |
● for channel diagnostics | No |
● for module diagnostics | Yes; green/red DIAG LED |
Potential separation | |
Potential separation channels | |
● between the channels | No |
● between the channels and backplane bus | Yes |
● between the channels and the power supply of the electronics | No |
Isolation | |
Isolation tested with | 707 V DC (type test) |
Standards, approvals, certificates | |
Suitable for safety functions | No |
Suitable for safety-related tripping of standard modules | Yes; From FS03 |
Highest safety class achievable in safety mode | |
● Performance level according to ISO 13849-1 | PL d |
● SIL acc. to IEC 61508 | SIL 2 |
Ambient conditions | |
Ambient temperature during operation | |
● horizontal installation, min. | 0 °C |
● horizontal installation, max. | 60 °C |
● vertical installation, min. | 0 °C; in all other mounting positions |
● vertical installation, max. | 50 °C; in all other mounting positions |
Altitude during operation relating to sea level | |
● Ambient air temperature-barometric pressurealtitude | On request: Negative ambient temperature down to -30 °C
(without condensation), installation altitudes between 2 000 m and 5 000 m |
Dimensions | |
Width | 15 mm |
Height | 73 mm |
Depth | 58 mm |
SIEMENS Digital Output Module 6ES7132-6BH00-0BA0 |
Be the first to review “Digital Output Module 6ES7132-6BH00-0BA0”
-
منبع تغذیه 24 ولت 2.5 آمپر ریلی
660,000 تومانمنبع تغذیه 24 ولت 2.5 آمپر مین ول در مجموع با 60 ولت در خروجی می باشد . سری MDR 60 در دسته محصولات ریلی این شرکت قرار می گیرند.این منبع تغذیه قابلیت نصب بر روی ریل های DIN TS-35/7.5 یا DIN TS-35/15 را دارد. با توجه به ابعاد کوچک در داخل کابین و یا بر روی ریل فضای کمی را اشغال می کند به همین دلیل به این سری،… -
منبع تغذیه 24 ولت 62.5 آمپر مین ول
0 تومانمنبع تغذیه 24 ولت 62.5 آمپر مین ول با توان اندازه گیری شده 1500 وات واقعی در خروجی تحویل مصرف کننده قرار می گیرد. ولتاژ ورودی بین 180 تا 264 ولت ac و دارای مدار محدود کننده جریان در ورودی ، کنترل از راه دور و فن خنک کننده داخلی بلبرینگی DC از ویژگی های این محصول است. -
منبع تغذیه 24 ولت 13.4 آمپر مین ول
0 تومانمنبع تغذیه 24 ولت 13.4 آمپر مین ول (RSP-320-24) با توان 320 وات اندازه گیری شده در خروجی می باشد. منبع تغذیه 24 ولت مین ول در دسته منبع تغذیه های کف خواب این شرکت قرار می گیرد. راندمان در این منبع تغذیه به 89% میرسد که مقدار قابل توجهی می باشد. این منبع تغذیه دارای مدار اصلاح ضریب قدرت یا PFC می باشد. -
منبع تغذیه دو خروجی مین ول
0 تومانمنبع تغذیه دو خروجی 13.5 ولت 1.3 آمپر مین ول (RD-3513) با توان 35 وات در خروجی در اختیار کاربر قرار می گیرد. RD-3513 منبع تغذیه دو خروجی 35 وات , خروجی اول مثبت 13.5 ولت 1.3 آمپر و خروجی دوم منفی 13.5 ولت 1.3 امپر می باشد که مجموع توان آن 35 وات می شود.این سوئیچینگ (RD-3513) در دسته ی منبع تغذیه های کف خواب شرکت مین ول قرا… -
منبع تغذیه 24 ولت 5 آمپر مین ول
1,299,000 تومانمنبع تغذیه 24 ولت 5 آمپر مین ول (EDR-120-24) با توان و قدرت واقعی اندازه گیری شده 120 وات می باشد. سری EDR-120 جزء محصولات ریلی شرکت مین ول محسوب می شود. با توجه به طراحی و کیفیت ساخت بالا این منبع تغذیه راندمان به %87.5 میرسد. از جمله موارد حفاظتی می توان به حفاظت در برابر اتصال کوتاه، اضافه جریان، اضافه ولتاژ و دمای بالا اشاره کرد. به وسیله… -
منبع تغذیه 24 ولت 40 آمپر(ورودی380ولت)مین ول
0 تومانمنبع تغذیه 24 ولت 40 آمپر مین ول با توان اندازه گیری شده 960 وات واقعی در خروجی در اختیار کاربر است. این منبع تغذیه سوئیچینگ در دسته محصولات ریلی این شرکت قرار می گیرد. منبع تغذیه TDR-960-24 توانایی شروع به کار با ولتاژ سه فاز و دو فاز را دارد. راندمان بالا تا 94.5% و مصرف کم توان در حالت بی باری از ویژگی های این محصول به حساب…
Reviews
There are no reviews yet.