Digital Output Module 6ES7132-6BH00-0BA0
تماس بگیرید
بررسی اجمالی محصول
*** Spare part *** SIMATIC ET 200SP, Digital Output Module , DQ 16x 24VDC/0.5A Standard, suitable for BU type A0, Color code CC00, module diagnostics
نقد و بررسی : Digital Output Module 6ES7132-6BH00-0BA0
Digital Output Module 6ES7132-6BH00-0BA0
*** Spare part *** SIMATIC ET 200SP, Digital Output Module , DQ 16x 24VDC/0.5A Standard, suitable for BU type A0, Color code CC00, module diagnostics
SIEMENS | |||
General information |
|||
Product type designation | DQ 16×24 VDC/0.5 A ST | ||
Firmware version
● FW update possible |
V1.0 | ||
Yes | |||
usable BaseUnits | BU type A0 | ||
Color code for module-specific color identification plate | CC00 | ||
Product function | |||
● I&M data | Yes; I&M0 to I&M3 | ||
Engineering with | |||
● STEP 7 TIA Portal configurable/integrated as of version | V11 SP2 / V13 | ||
● STEP 7 configurable/integrated as of version | V5.5 SP3 / –
|
||
● PCS 7 configurable/integrated as of version | |||
● PROFIBUS as of GSD version/GSD revision | |||
● PROFINET as of GSD version/GSD revision | GSDML V2.3 | ||
Operating mode | |||
● DQ | Yes | ||
● DQ with energy-saving function | No |
● PWM | No
No |
● Oversampling | |
● MSO | No |
Redundancy | |
● Redundancy capability | Yes |
Supply voltage | |
Rated value (DC) | 24 V |
permissible range, lower limit (DC) | 19.2 V |
permissible range, upper limit (DC) | 28.8 V |
Reverse polarity protection | Yes |
Input current |
|
Current consumption, max. | 60 mA; without load |
Output voltage | |
Rated value (DC) | 24 V |
Power loss | |
Power loss, typ. | 1 W |
Address area | |
Address space per module | |
● Address space per module, max. | 2 byte |
Hardware configuration | |
Automatic encoding | |
● Mechanical coding element | Yes |
Selection of BaseUnit for connection variants | |
● 1-wire connection | BU type A0 |
● 2-wire connection | BU type A0 + Potential isolation module |
● 3-wire connection | BU type A0 + Potential isolation module |
● 4-wire connection | BU type A0 + Potential isolation module |
Digital outputs | |
Type of digital output | Source output (PNP, current-sourcing) |
Number of digital outputs | 16 |
Current-sinking | No |
Current-sourcing | Yes |
Digital outputs, parameterizable | Yes |
Short-circuit protection | Yes |
● Response threshold, typ. | 0.7 to 1.3 A |
Limitation of inductive shutdown voltage to | Typ. L+ (-50 V) |
Controlling a digital input | Yes |
Switching capacity of the outputs |
|
● with resistive load, max. | 0.5 A |
● on lamp load, max. | 5 W |
Load resistance range | |
● lower limit | 48 Ω |
● upper limit | 12 kΩ |
Output current | |
● for signal “1” rated value | 0.5 A |
● for signal “0” residual current, max. | 0.1 mA |
Output delay with resistive load | |
● “0” to “1”, typ. | 50 µs |
● “1” to “0”, typ. | 100 µs |
Parallel switching of two outputs | |
● for uprating | No |
● for redundant control of a load | Yes |
Switching frequency | |
● with resistive load, max. | 100 Hz |
● with inductive load, max. | 2 Hz |
● on lamp load, max. | 10 Hz |
Total current of the outputs | |
● Current per channel, max. | 0.5 A |
● Current per module, max. | 8 A |
Total current of the outputs (per module) | |
horizontal installation | |
— up to 30 °C, max. | 8 A |
— up to 40 °C, max. | 8 A |
— up to 50 °C, max. | 6 A |
— up to 60 °C, max. | 4 A |
vertical installation | |
— up to 30 °C, max. | 8 A |
— up to 40 °C, max. | 6 A |
— up to 50 °C, max. | 4 A |
— up to 60 °C, max. | 4 A |
Cable length | |
● shielded, max. | 1 000 m |
● unshielded, max. | 600 m |
Isochronous mode | |
Isochronous operation (application synchronized up to terminal) | No |
Interrupts/diagnostics/status information | |
Diagnostics function | Yes |
Substitute values connectable | Yes |
Alarms | |
● Diagnostic alarm | Yes |
Diagnostic messages | |
● Monitoring the supply voltage | Yes |
● Wire-break | Yes; Module-wise |
● Short-circuit to M | Yes; Module-wise |
● Short-circuit to L+ | Yes; Module-wise |
● Group error | Yes |
Diagnostics indication LED |
|
● Monitoring of the supply voltage (PWR-LED) | Yes; Green PWR LED |
● Channel status display | Yes; Green LED |
● for channel diagnostics | No |
● for module diagnostics | Yes; green/red DIAG LED |
Potential separation | |
Potential separation channels | |
● between the channels | No |
● between the channels and backplane bus | Yes |
● between the channels and the power supply of the electronics | No |
Isolation | |
Isolation tested with | 707 V DC (type test) |
Standards, approvals, certificates | |
Suitable for safety functions | No |
Suitable for safety-related tripping of standard modules | Yes; From FS03 |
Highest safety class achievable in safety mode | |
● Performance level according to ISO 13849-1 | PL d |
● SIL acc. to IEC 61508 | SIL 2 |
Ambient conditions | |
Ambient temperature during operation | |
● horizontal installation, min. | 0 °C |
● horizontal installation, max. | 60 °C |
● vertical installation, min. | 0 °C; in all other mounting positions |
● vertical installation, max. | 50 °C; in all other mounting positions |
Altitude during operation relating to sea level | |
● Ambient air temperature-barometric pressurealtitude | On request: Negative ambient temperature down to -30 °C
(without condensation), installation altitudes between 2 000 m and 5 000 m |
Dimensions | |
Width | 15 mm |
Height | 73 mm |
Depth | 58 mm |
SIEMENS Digital Output Module 6ES7132-6BH00-0BA0 |
Be the first to review “Digital Output Module 6ES7132-6BH00-0BA0”
-
پنل لمسی 7 اینچ HMI WEINTEK
تماس بگیریدپنل لمسی (اچ ام ای) 7 اینچ وینتک (WEINTEK HMI) با رزولوشن 800 * 480 ساخته شده است. HMI وینتک سری MT6071IP دارای صفحه نمایش از نوع TFT LCD همراه با نور پس زمینه LED می باشد. پردازنده به کار رفته در این پنل لمسی (اچ ام ای) Cortex-A8 با فرکانس 600 مگا هرتز و از نوع 32 بیتی می باشد. حافظه رم (RAM) در این HMI ، 128 MB… -
پنل لمسی 10.1 اینچ WEINTEK HMI
تماس بگیریدپنل لمسی 10.1 اینچ وینتک با رزولوشن 800*480 ساخته شده است. HMI وینتک سری MT8100IE دارای صفحه نمایش از نوع TFT LCD همراه با نور پس زمینه LED می باشد. پردازنده به کار رفته در این پنل لمسی Cortex-A8 با فرکانس 600 مگا هرتز و از نوع 32 بیتی می باشد. حافظه رم (RAM) در این HMI ، 128 MB می باشد. همچنین حافظه فلش (FLASH) در این پنل لمسی… -
منبع تغذیه 15 ولت 4 آمپر مین ول
0 تومانمنبع تغذیه 15 ولت 4 آمپر مین ول (DR-60-15) با توان 60 وات واقعی در خروجی اندازه گیری شده است. این پاور در دسته ی منبع تغذیه های ریلی شرکت مین ول قرار می گیرد. راندمان کاری در این منبع تغذیه به عدد بالای 82 درصد می رسد که بسیار کاربردی ست. توان مصرفی در این منبع تغذیه بسیار کم است به طوری که کل توان تولید به خروجی انتقال… -
منبع تغذیه 24 ولت 2.2 آمپر مین ول
0 تومانمنبع تغذیه 24 ولت 2.2 آمپر مین ول (LRS-50-24) با توان و قدرت 52.8 وات در خروجی انداره گیری شده است. سوئیچینگ مین ول سری LRS-50-24 جزء درسته کف خواب محصولات این شرکت محسوب می شود. این منبع تغذیه توانای تحمل ولتاژ ورودی تا 300 را تا 5 ثانیه دارد. راندمان در این منبع تغذیه تا 90% اندازه گیری شده است که بسیار بالا و کاربردی می باشد. تلفات در… -
منبع تغذیه 12 ولت 17 آمپر مین ول
تماس بگیریدمنبع تغذیه 12 ولت 17 آمپر مین ولبا کد فنی NES-200-12 با توان و قدرت 204 وات در خروجی انداره گیری شده است. سوئیچینگ مین ول سری NES-200-12 جزء درسته کف خواب محصولات شرکت مین ول محسوب می شود. این منبع تغذیه توانای تحمل ولتاژ ورودی تا 300 را تا 5ثانیه دارد. راندمان در این منبع تغذیه تا 87.5% اندازه گیری شده است که بسیار بالا و کاربردی می باشد.… -
منبع تغذیه 48 ولت 2.5 آمپر مین ول
0 تومانمنبع تغذیه 48 ولت 2.5 آمپر مین ول (EDR 120 48) با توان و قدرت واقعی اندازه گیری شده 120 وات می باشد. این سری جزء محصولات ریلی این شرکت محسوب می شود. این منبع تغذیه بر روی ریل های استاندار TS-35 / 7.5 یا TS-35 / 15 قرار می گیرد.
Reviews
There are no reviews yet.