نقد و بررسی : Digital Input Module 6ES7131-6BH00-0BA0
Digital Input Module 6ES7131-6BH00-0BA0 SIEMENS
*** Spare part *** SIMATIC ET 200SP SIEMENS , digital input module, DI 16X 24 V DC Standard, suitable for BU type A0, color code CC00, module diagnostics
SIEMENS | |||
General information |
|||
Product type designation | DI 16×24 VDC ST | ||
Firmware version
● FW update possible |
V1.1 | ||
Yes | |||
usable BaseUnits | BU type A0 | ||
Color code for module-specific color identification plate | CC00 | ||
Product function | |||
● I&M data | Yes; I&M0 to I&M3 | ||
Engineering with | |||
● STEP 7 TIA Portal configurable/integrated as of version | V13 SP1 | ||
● STEP 7 configurable/integrated as of version | V5.5 / –
|
||
● PCS 7 configurable/integrated as of version | |||
● PROFIBUS as of GSD version/GSD revision | |||
● PROFINET as of GSD version/GSD revision | GSDML V2.3 | ||
Operating mode | |||
● DI | Yes | ||
● Counter | No |
● Oversampling | No
No |
● MSI | |
Supply voltage | |
Rated value (DC) | 24 V |
permissible range, lower limit (DC) | 19.2 V |
permissible range, upper limit (DC) | 28.8 V |
Reverse polarity protection | Yes |
Input current | |
Current consumption, max. | 90 mA |
Encoder supply | |
Short-circuit protection | No |
24 V encoder supply | |
● 24 V | No |
● Short-circuit protection | No |
Power loss | |
Power loss, typ. | 1.7 W |
Address area | |
Address space per module | |
● Address space per module, max. | 2 byte; + 2 bytes for QI information |
Hardware configuration | |
Automatic encoding | |
● Mechanical coding element | Yes |
Selection of BaseUnit for connection variants | |
● 1-wire connection | BU type A0 |
● 2-wire connection | BU type A0 + external terminals |
● 3-wire connection | BU type A0 + external terminals |
● 4-wire connection | BU type A0 + external terminals |
Digital inputs |
|
Number of digital inputs | 16 |
Source/sink input | P-reading |
Input characteristic curve in accordance with IEC 61131, type 1 | Yes |
Input characteristic curve in accordance with IEC 61131, type 2 | No |
Input characteristic curve in accordance with IEC 61131, type 3 | Yes |
Pulse extension | No |
Input voltage | |
● Rated value (DC) | 24 V |
● for signal “0” | -30 to +5 V |
● for signal “1” | +11 to +30V |
Input current | |
● for signal “1”, typ. | 2.5 mA |
Input delay (for rated value of input voltage) | |
for standard inputs | |
— parameterizable | Yes; 0.05 / 0.1 / 0.4 / 0.8 / 1.6 / 3.2 / 12.8 / 20 ms (in each case + delay of 30 to 500 µs, depending on line length) |
— at “0” to “1”, min. | 0.05 ms |
— at “0” to “1”, max. | 20 ms |
— at “1” to “0”, min. | 0.05 ms |
— at “1” to “0”, max. | 20 ms |
for interrupt inputs | |
— parameterizable | No |
for technological functions | |
— parameterizable | No |
Cable length | |
● shielded, max. | 1 000 m |
● unshielded, max. | 600 m |
Encoder |
|
Connectable encoders | |
● 2-wire sensor | Yes |
— permissible quiescent current (2-wire sensor), max. | 1.5 mA |
Isochronous mode | |
Isochronous operation (application synchronized up to terminal) | No |
Interrupts/diagnostics/status information | |
Diagnostics function | Yes |
Alarms | |
● Diagnostic alarm | Yes |
Diagnostic messages | |
● Diagnostic information readable | Yes |
● Monitoring the supply voltage | Yes |
— parameterizable | Yes |
● Monitoring of encoder power supply | No |
● Wire-break | Yes; Module-by-module, optional protective circuit for preventing wire-break diagnostics in the case of simple encoder contacts: 25 kOhm to 45 kOhm |
● Short-circuit | No |
● Group error | Yes |
Diagnostics indication LED |
Be the first to review “Digital Input Module 6ES7131-6BH00-0BA0”
-
منبع تغذیه 24 ولت 5 امپر مین ول
0 تومانمنبع تغذیه 24 ولت 5 امپر مین ول (DRH-120-24) با توان 120 وات واقعی در خروجی اندازه گیری شده است. این پاور در دسته ی منبع تغذیه های ریلی شرکت مین ول قرار می گیرد. ولتاژ یونیورسال ورودی این منبع تغذیه دارای پوشش وسیعی از 340 ولت تا 550 ولت متناوب (ac) می باشد. راندمان کاری در این منبع تغذیه به عدد بالای 85% می رسد که بسیار کاربردی ست.… -
درایو 11 کیلووات 50آمپر کیوما QMA Q1000N
13,400,000 توماناینورتر های شرکت QMA Electronics چین بر اساس موتور های گیربکسی طراحی شده و به صورت تخصصی بر روی آسانسور و بالابر پیاده سازی شده است .درایو کنترل دور موتور آسانسور qma کیوما چین که در صنعت آسانسور ایران نام شناخته شده ای می باشد. در انواع مختلف OPEN و CLOSE طراحی و ساخته شده است -
منبع تغذیه 24 ولت 14.6 آمپر مین ول
0 تومانمنبع تغذیه 24 ولت 14.6 آمپر مین ول (LRS-350-24) با توان اندازه گیری شده 350.4 وات در خروجی محاسبه شده است. این منبع تغذیه در دسته پاور های کف خواب شرکت مین ول قرا می گیرند. راندمان در منبع تغذیه 24 ولت 14.6 آمپر به 88% می رسد که به راحتی پاسخگوی نیاز کاربران است. تلفات در این منبع تغذیه بسیار کم بوده به طوری که در زمان بی باری… -
درایو 5.5 کیلووات سه فاز دانفوس Danfoss
تماس بگیریداینورتر5.5کیلووات دانفوس ، درایوی چند منظوره است که در حال حاضر تا توان 5.5کیلووات تولید می شود .پانل کنترلی این سری را می توان مستقیما روی درایو نصب کرد یا از طریق یک کابل مخصوص در جایی دیگر نصب نمود. همچنین با استفاده از این پانل می توان برنامه یک درایو را در درایو دیگر کپی کرد. اگر پانل در دسترس نباشد، می توان با اتصال یک کامپیوتر به درایو… -
مبدل12 به 24 ولت 2.1 آمپر مین ول
0 تومانمبدل12 به 24 ولت 2.1 آمپر (SD-50A-24) مین ول با توان 50.4 وات واقعی در خروجی اندازه گیری شده است. این مبدل DC به DC جزء دسته منبع تغذیه های کف خواب شرکت مین ول می باشد. ولتاژ ورودی منبع تغذیه SD-50A دارای بازه ی ولتاژی از 9 ولت تا 18 ولت می باشد. بازدهی (راندمان) این کانورتر به عدد بالای 74 درصد می رسد. که پاسخگوی نیاز های مصرف… -
منبع تغذیه و شارژر(UPS) 24 ولت 480 وات مین ول کد DRS-480-24
14,900,000 تومانمنبع تغذیه و شارژر(UPS) 24 ولت 480 وات مین ول کد DRS-480-24 منبع تغذیه فوق در صنایعی که احتیاج آنها UPS DC است کاربرد دارد از جمله تجهیزات اتوماسیون صنعتی و ماشین آلاتی که با قطع برق ورودی دستگاه نباید قسمت تغذیه سایر تجهیزات کنترلی دوچار اختلال گردد
Reviews
There are no reviews yet.