S7-1500 SIEMENS 6ES7515-2AM01-0AB0

تماس بگیرید

دسته بندی : PLC 1500, زیمنس

برچسب ها 1500 plc, 1500 plc siemens, plc 1500 series, plc 1500 siemens manual

آخرین بروزرسانی : ۲۰ شهریور, ۱۴۰۳

بررسی اجمالی محصول

SIMATIC S7-1500, CPU 1515-2 PN, Central processing unit with work memory 500 KB for Program and 3 MB for data, 1st interface: PROFINET IRT with 2-port switch, 2nd interface: PROFINET RT, 30 ns bit performance, SIMATIC Memory Card required

جهت ارائه خدمات همکاری از قبیل تخفیف همکاری , لیست قیمت و…

خدمات همکاری آی سی اِس شاپـــــــ شامل تامین لوازم و تجهیزات صنعتی (برندهای مطرح دنیا) ، ارائه گارانتی و تعمیر فوری محصولات , مشاوره به همکاران گرامی , ارائه تخفیف همکاری و یا ارسال رایگان محصولات می باشد . (همکاری شمارتو وارد کن تا فرم ثبت نام برات ارسال بشه )

نقد و بررسی : S7-1500 SIEMENS 6ES7515-2AM01-0AB0

S7-1500 SIEMENS 6ES7515-2AM01-0AB0

SIMATIC S7-1500 SIEMENS , CPU 1515-2 PN, Central processing unit with work memory 500 KB for Program and 3 MB for data, 1st interface: PROFINET IRT with 2-port switch, 2nd interface: PROFINET RT, 30 ns bit performance, SIMATIC Memory Card required

SIEMENS
General information
Product type designation	CPU 1515-2 PN
HW functional status	FS03
Firmware version	V2.8
Product function
● I&M data	Yes; I&M0 to I&M3
● Isochronous mode	Yes; Distributed and central; with minimum OB 6x cycle of 500 µs (distributed) and 1 ms (central)
Engineering with
● STEP 7 TIA Portal configurable/integrated as of version	V16 (FW V2.8) / V13 (FW V1.5) or higher

Configuration control
via dataset	Yes

Display
Screen diagonal [cm]	6.1 cm

Control elements
Number of keys	6
Mode selector switch	1

Supply voltage
Type of supply voltage	24 V DC
permissible range, lower limit (DC)	19.2 V
permissible range, upper limit (DC)	28.8 V
Reverse polarity protection	Yes
Mains buffering
● Mains/voltage failure stored energy time	5 ms
● Repeat rate, min.	1/s
	1/s
Input current
Current consumption (rated value)	0.8 A
Inrush current, max.	2.4 A; Rated value
I²t	0.02 A²·s
I²t
Power
Infeed power to the backplane bus	12 W
Power consumption from the backplane bus (balanced)	6.2 W
Power consumption from the backplane bus (balanced)
Power loss
Power loss, typ.	6.3 W
Power loss, typ.
Memory
Number of slots for SIMATIC memory card	1
SIMATIC memory card required	Yes
Work memory
● integrated (for program)	500 kbyte
● integrated (for data)	3 Mbyte
Load memory
● Plug-in (SIMATIC Memory Card), max.	32 Gbyte
Backup
● maintenance-free	Yes
	Yes
CPU processing times
for bit operations, typ.	30 ns
for word operations, typ.	36 ns
for fixed point arithmetic, typ.	48 ns
for floating point arithmetic, typ.	192 ns
for floating point arithmetic, typ.
CPU-blocks
Number of elements (total)	6 000; Blocks (OB, FB, FC, DB) and UDTs
DB
● Number range	1 … 60 999; subdivided into: number range that can be used by the user: 1 … 59 999, and number range of DBs created via SFC 86: 60 000 … 60 999
● Size, max.	3 Mbyte; For DBs with absolute addressing, the max. size is 64 KB

FB
● Number range	0 … 65 535
● Size, max.	500 kbyte
FC
● Number range	0 … 65 535
● Size, max.	500 kbyte
OB
● Size, max.	500 kbyte
● Number of free cycle OBs	100
● Number of time alarm OBs	20
● Number of delay alarm OBs	20
● Number of cyclic interrupt OBs	20; With minimum OB 3x cycle of 500 µs
● Number of process alarm OBs	50
● Number of DPV1 alarm OBs	3
● Number of isochronous mode OBs	2
● Number of technology synchronous alarm OBs	2
● Number of startup OBs	100
● Number of asynchronous error OBs	4
● Number of synchronous error OBs	2
● Number of diagnostic alarm OBs	1
Nesting depth
● per priority class	24

Counters, timers and their retentivity
S7 counter
● Number	2 048
Retentivity
— adjustable	Yes
IEC counter
● Number	Any (only limited by the main memory)
Retentivity
— adjustable	Yes
S7 times
● Number	2 048
Retentivity
— adjustable	Yes
IEC timer
● Number	Any (only limited by the main memory)
Retentivity
— adjustable	Yes

Data areas and their retentivity

Retentive data area (incl. timers, counters, flags), max.	512 kbyte; In total; available retentive memory for bit memories, timers, counters, DBs, and technology data (axes): 472 KB
Extended retentive data area (incl. timers, counters, flags), max.	3 Mbyte; When using PS 6 0W 24/48/60 V DC HF
Flag
● Number, max.	16 kbyte
● Number of clock memories	8; 8 clock memory bit, grouped into one clock memory byte
Data blocks
● Retentivity adjustable	Yes
● Retentivity preset	No
Local data
● per priority class, max.	64 kbyte; max. 16 KB per block

Address area
Number of IO modules	8 192; max. number of modules / submodules
I/O address area
● Inputs	32 kbyte; All inputs are in the process image
● Outputs	32 kbyte; All outputs are in the process image
per integrated IO subsystem
— Inputs (volume)	8 kbyte
— Outputs (volume)	8 kbyte
per CM/CP
— Inputs (volume)	8 kbyte
— Outputs (volume)	8 kbyte
Subprocess images
● Number of subprocess images, max.	32

Hardware configuration
Number of distributed IO systems	64; A distributed I/O system is characterized not only by the integration of distributed I/O via PROFINET or PROFIBUS communication modules, but also by the connection of I/O via ASi master modules or links (e.g. IE/PB-Link)
Number of DP masters
● Via CM	8; A maximum of 8 CMs/CPs (PROFIBUS, PROFINET, Ethernet) can be inserted in total
Number of IO Controllers
● integrated	2
● Via CM	8; A maximum of 8 CMs/CPs (PROFIBUS, PROFINET, Ethernet) can be inserted in total
Rack
● Modules per rack, max.	32; CPU + 31 modules
● Number of lines, max.	1
PtP CM
● Number of PtP CMs	the number of connectable PtP CMs is only limited by the number of available slots


Time of day
Clock
● Type	Hardware clock
● Backup time	6 wk; At 40 °C ambient temperature, typically
● Deviation per day, max.	10 s; Typ.: 2 s
Operating hours counter
● Number	16
Clock synchronization
● supported	Yes
● in AS, master	Yes
● in AS, slave	Yes
● on Ethernet via NTP	Yes

Interfaces
Number of PROFINET interfaces	2

1. Interface
Interface types
● Number of ports	2
● integrated switch	Yes
● RJ 45 (Ethernet)	Yes; X1
Protocols
● IP protocol	Yes; IPv4
● PROFINET IO Controller	Yes
● PROFINET IO Device	Yes
● SIMATIC communication	Yes
● Open IE communication	Yes; Optionally also encrypted
● Web server	Yes
● Media redundancy	Yes
PROFINET IO Controller
Services
— PG/OP communication	Yes
— S7 routing	Yes
— Isochronous mode	Yes
— Direct data exchange	Yes; Requirement: IRT and isochronous mode (MRPD optional)
— IRT	Yes
— MRP	Yes; MRP Automanager acc. to IEC 62439-2 Edition 2.0; MRP Manager; MRP Client; max. number of devices in the ring: 50
— MRPD	Yes; Requirement: IRT
— PROFIenergy	Yes; per user program
— Prioritized startup	Yes; Max. 32 PROFINET devices
— Number of connectable IO Devices, max.	256; In total, up to 1 000 distributed I/O devices can be connected via AS-i, PROFIBUS or PROFINET

— Of which IO devices with IRT, max.	64 256
— Number of connectable IO Devices for RT, max.	64 256
— of which in line, max.	256
— Number of IO Devices that can be simultaneously activated/deactivated, max.	8; in total across all interfaces
— Number of IO Devices per tool, max.	8
— Updating times	The minimum value of the update time also depends on communication share set for PROFINET IO, on the number of IO devices, and on the quantity of configured user data
Update time for IRT
— for send cycle of 250 µs	250 μs to 4 ms; Note: In the case of IRT with isochronous mode, the minimum update time of 500 µs of the isochronous OB is decisive
— for send cycle of 500 µs	500 µs to 8 ms
— for send cycle of 1 ms	1 ms to 16 ms
— for send cycle of 2 ms	2 ms to 32 ms
— for send cycle of 4 ms	4 ms to 64 ms
— With IRT and parameterization of “odd” send cycles	Update time = set “odd” send clock (any multiple of 125 µs: 375 µs, 625 µs … 3 875 µs)
Update time for RT
— for send cycle of 250 µs	250 µs to 128 ms
— for send cycle of 500 µs	500 µs to 256 ms
— for send cycle of 1 ms	1 ms to 512 ms
— for send cycle of 2 ms	2 ms to 512 ms
— for send cycle of 4 ms	4 ms to 512 ms
PROFINET IO Device
Services
— PG/OP communication	Yes
— S7 routing	Yes
— Isochronous mode	No
— IRT	Yes
— MRP	Yes; MRP Automanager acc. to IEC 62439-2 Edition 2.0; MRP Manager; MRP Client; max. number of devices in the ring: 50
— MRPD	Yes; Requirement: IRT
— PROFIenergy	Yes; per user program
— Shared device	Yes
— Number of IO Controllers with shared device, max.	4
— Asset management record	Yes; per user program

2. Interface
Interface types
● Number of ports	1

— PROFIenergy	Yes; per user program No
— Prioritized startup	Yes; per user program No
— Shared device	Yes
— Number of IO Controllers with shared device, max.	4
— Asset management record	Yes; per user program

Interface types
RJ 45 (Ethernet)
● 100 Mbps	Yes
● Autonegotiation	Yes
● Autocrossing	Yes
● Industrial Ethernet status LED	Yes

Protocols
Number of connections
● Number of connections, max.	192; via integrated interfaces of the CPU and connected CPs / CMs
● Number of connections reserved for ES/HMI/web	10
● Number of connections via integrated interfaces	108
● Number of S7 routing paths	16
Redundancy mode
● H-Sync forwarding	Yes
SIMATIC communication
● S7 communication, as server	Yes
● S7 communication, as client	Yes
● User data per job, max.	See online help (S7 communication, user data size)
Open IE communication
● TCP/IP	Yes
— Data length, max.	64 kbyte
— several passive connections per port, supported	Yes
● ISO-on-TCP (RFC1006)	Yes
— Data length, max.	64 kbyte
● UDP	Yes
— Data length, max.	2 kbyte; 1 472 bytes for UDP broadcast
— UDP multicast	Yes; Max. 5 multicast circuits
● DHCP	No
● SNMP	Yes
● DCP	Yes Yes
● LLDP	Yes Yes
Web server

— Number of server methods, max.	50 20
— Number of inputs/outputs per server method, max.	50 20
— Number of monitored items, max.	2 000; for 1 s sampling interval and 1 s send interval
— Number of server interfaces, max.	10; or 20, depending on type of server interface
— Number of nodes for user-defined server interfaces, max.	5 000
Further protocols
● MODBUS	Yes; MODBUS TCP
Media redundancy
● Switchover time on line break, typ.	200 ms; For MRP, bumpless for MRPD
● Number of stations in the ring, max.	50

Isochronous mode
Isochronous operation (application synchronized up to terminal)	Yes; Distributed and central; with minimum OB 6x cycle of 500 µs (distributed) and 1 ms (central)
Equidistance	Yes

S7 message functions
Number of login stations for message functions, max.	64
Program alarms	Yes
Number of configurable program messages, max.	10 000; Program messages are generated by the “Program_Alarm” block, ProDiag or GRAPH
Number of loadable program messages in RUN, max.	5 000
Number of simultaneously active program alarms ● Number of program alarms	800
● Number of alarms for system diagnostics	200
● Number of alarms for motion technology objects	160

Test commissioning functions
Joint commission (Team Engineering)	Yes; Parallel online access possible for up to 8 engineering systems
Status block	Yes; Up to 8 simultaneously (in total across all ES clients)
Single step	No
Number of breakpoints	8
Status/control
● Status/control variable	Yes
● Variables	Inputs/outputs, memory bits, DBs, distributed I/Os, timers, counters
● Number of variables, max. — of which status variables, max.	200; per job
— of which control variables, max.	200; per job
Forcing

● Forcing, variables	Peripheral inputs/outputs 200
● Number of variables, max.	Peripheral inputs/outputs 200
Diagnostic buffer
● present	Yes
● Number of entries, max.	3 200
— of which powerfail-proof	500
Traces
● Number of configurable Traces	4; Up to 512 KB of data per trace are possible
● Number of configurable Traces
Interrupts/diagnostics/status information
Diagnostics indication LED
● RUN/STOP LED	Yes
● ERROR LED	Yes
● MAINT LED	Yes
● Connection display LINK TX/RX	Yes

Supported technology objects
Motion Control	Yes; Note: The number of axes affects the cycle time of the PLC program; selection guide via the TIA Selection Tool or SIZER
● Number of available Motion Control resources for technology objects (except cam disks)	2 400
● Required Motion Control resources — per speed-controlled axis	40
— per positioning axis	80
— per synchronous axis	160
— per external encoder	80
— per output cam	20
— per cam track	160
— per probe	40
● Positioning axis
— Number of positioning axes at motion control cycle of 4 ms (typical value)	7
— Number of positioning axes at motion control cycle of 8 ms (typical value)	14
Controller ● PID_Compact	Yes; Universal PID controller with integrated optimization
● PID_3Step ● PID-Temp	Yes; PID controller with integrated optimization for valves
● PID_3Step ● PID-Temp	Yes; PID controller with integrated optimization for temperature
Counting and measuring
● High-speed counter	Yes

Ambient conditions
Ambient temperature during operation
● horizontal installation, min.	0 °C

● horizontal installation, max.	60 °C; Display: 50 °C, at an operating temperature of typically 50 °C, the display is switched off 0 °C
● vertical installation, min.
● vertical installation, max.	40 °C; Display: 40 °C, at an operating temperature of typically 40 °C, the display is switched off
Ambient temperature during storage/transportation
● min.	-40 °C
● max.	70 °C
Altitude during operation relating to sea level
● Installation altitude above sea level, max.	5 000 m; Restrictions for installation altitudes > 2 000 m, see manual
● Installation altitude above sea level, max.
Configuration
Programming
Programming language
— LAD	Yes
— FBD	Yes
— STL	Yes
— SCL	Yes
— GRAPH	Yes
Know-how protection
● User program protection/password protection	Yes
● Copy protection	Yes
● Block protection	Yes
Access protection
● Password for display	Yes
● Protection level: Write protection	Yes
● Protection level: Read/write protection	Yes
● Protection level: Complete protection	Yes
Cycle time monitoring
● lower limit	adjustable minimum cycle time
● upper limit	adjustable maximum cycle time

Dimensions
Width	70 mm
Height	147 mm
Depth	129 mm
Depth
Weights
Weight, approx.	830 g
last modified:	01/17/2020

اينورتر 1.5 کیلووات تک فاز اینوت invt سری GD20
8,523,000 تومان
آی سی اِس شاپ ارائه دهنده اینورتر invt با ماهمراه باشید با معرفی مشخصات درایو 1.5 کیلووات تک فاز اینوت invt سری GD20 محصولی کوچک و اقصادی 🔺 برند : اینوت invt 🔺 نوع محصول : اينورتر 1.5 کیلووات تک فاز 🔺 کد فنی اینورتر : GD20-1R5G-S2 🔺 سری اینورتر : اينورتر GD20

افزودن به سبد خرید
نمایش سریع محصول
مبدل 110 به 24 ولت 14 آمپر مین ول
0 تومان
کانورتر 24 ولت 14 آمپر مین ول با توان و قدرت 350 وات واقعی در خروجی اندازه گیری شده است. این مبدل DC به DC در دسته کانورتر های کف خواب این شرکت تایوانی قرار می گیرد. راندمان در این منبع تغذیه DC به DC تا عدد بالای 82 در صد می رسد که در صنعت بسیار کاربردی ست. محافظت در برابر اتصال کوتاه، اضافه بار، ولتاژ بالا و درجه…

افزودن به سبد خرید
نمایش سریع محصول
منبع تغذیه 12 ولت 37.5 آمپر مین ول
0 تومان
منبع تغذیه 12 ولت 37.5 آمپر مین ول (SE-450-12) با توان و قدرت 450 وات واقعی اندازه گیری شده است. این منبع تغذیه سوئیچینگ در دسته محصولات کف خواب این شرکت تایوانی قرار می گیرد. راندمان در این منبع تغذیه به عدد بالای 83% می رسد که به راحتی پاسخگوی نیاز کار می باشد. از ویژگی های حفاظتی در این منبع تغذیه می توان به حفاظت در برابر اتصال كوتاه،…

افزودن به سبد خرید
نمایش سریع محصول
منبع تغذیه 5 ولت 3 آمپر مین ول
0 تومان
منبع تغذیه 5 ولت 3 آمپر مین ول (MDR-20-5) در مجموع با 20 وات واقعی در خروجی اندازه گیری شده است. سری MDR 20 در دسته محصولات ریلی شرکت مین ول قرار می گیرند. بازدهی (راندمان) این کانورتر به عدد بالای 80 درصد می رسد. که پاسخگوی نیاز های مصرف کننده می باشد. از جمله ویژگی های حفاظتی که این محصول داراست میتوان به حفاظت در برابر اتصال کوتاه ،…

افزودن به سبد خرید
نمایش سریع محصول
مبدل 24 به 24 ولت 4.2 آمپر مین ول
2,520,000 تومان
کانورتر 24 ولت 4.2 آمپر (SD-100B-24) مین ول با توان و قدرت 100.8 وات در خروجی اندازه گیری شده است. این کانورتر در دسته مبدل های DC به DC کف خواب شرکت مین ول قرار می گیرد. راندمان این منبع تغذیه (SD-100B-24) تا 78 در صد افزایش پیدا می کند که این مقدار پاسخگو نیاز کاربر می باشد. این مبدل DC به DC (کانورتر) در فیلتر EMI ساخته شده است.…

افزودن به سبد خرید
نمایش سریع محصول
اينورتر 1.5 کیلووات تک فاز اینوت invt سری GD10
8,037,000 تومان
آی سی اِس شاپ ارائه دهنده اینورتر invt با ماهمراه باشید با معرفی مشخصات درایو 1.5 کیلووات تک فاز اینوت invt سری GD10 🔺 برند : اینوت invt 🔺 نوع محصول : اينورتر 1.5 کیلووات تک فاز 🔺 کد فنی اینورتر : GD10-1R5G-S2-B 🔺 سری اینورتر : اينورتر GD10

افزودن به سبد خرید
نمایش سریع محصول