Digital Input Module 6ES7131-6BH00-0BA0 SIEMENS
*** Spare part *** SIMATIC ET 200SP SIEMENS , digital input module, DI 16X 24 V DC Standard, suitable for BU type A0, color code CC00, module diagnostics
| SIEMENS | |||
General information |
|||
| Product type designation | DI 16×24 VDC ST | ||
| Firmware version
● FW update possible |
V1.1 | ||
| Yes | |||
| usable BaseUnits | BU type A0 | ||
| Color code for module-specific color identification plate | CC00 | ||
| Product function | |||
| ● I&M data | Yes; I&M0 to I&M3 | ||
| Engineering with | |||
| ● STEP 7 TIA Portal configurable/integrated as of version | V13 SP1 | ||
| ● STEP 7 configurable/integrated as of version | V5.5 / –
|
||
| ● PCS 7 configurable/integrated as of version | |||
| ● PROFIBUS as of GSD version/GSD revision | |||
| ● PROFINET as of GSD version/GSD revision | GSDML V2.3 | ||
| Operating mode | |||
| ● DI | Yes | ||
| ● Counter | No | ||
| ● Oversampling | No
No |
| ● MSI | |
| Supply voltage | |
| Rated value (DC) | 24 V |
| permissible range, lower limit (DC) | 19.2 V |
| permissible range, upper limit (DC) | 28.8 V |
| Reverse polarity protection | Yes |
| Input current | |
| Current consumption, max. | 90 mA |
| Encoder supply | |
| Short-circuit protection | No |
| 24 V encoder supply | |
| ● 24 V | No |
| ● Short-circuit protection | No |
| Power loss | |
| Power loss, typ. | 1.7 W |
| Address area | |
| Address space per module | |
| ● Address space per module, max. | 2 byte; + 2 bytes for QI information |
| Hardware configuration | |
| Automatic encoding | |
| ● Mechanical coding element | Yes |
| Selection of BaseUnit for connection variants | |
| ● 1-wire connection | BU type A0 |
| ● 2-wire connection | BU type A0 + external terminals |
| ● 3-wire connection | BU type A0 + external terminals |
| ● 4-wire connection | BU type A0 + external terminals |
Digital inputs |
|
| Number of digital inputs | 16 |
| Source/sink input | P-reading |
| Input characteristic curve in accordance with IEC 61131, type 1 | Yes |
| Input characteristic curve in accordance with IEC 61131, type 2 | No |
| Input characteristic curve in accordance with IEC 61131, type 3 | Yes |
| Pulse extension | No |
| Input voltage | |
| ● Rated value (DC) | 24 V |
| ● for signal “0” | -30 to +5 V |
| ● for signal “1” | +11 to +30V |
| Input current | |
| ● for signal “1”, typ. | 2.5 mA |
| Input delay (for rated value of input voltage) | |
| for standard inputs | |
| — parameterizable | Yes; 0.05 / 0.1 / 0.4 / 0.8 / 1.6 / 3.2 / 12.8 / 20 ms (in each case + delay of 30 to 500 µs, depending on line length) |
| — at “0” to “1”, min. | 0.05 ms |
| — at “0” to “1”, max. | 20 ms |
| — at “1” to “0”, min. | 0.05 ms |
| — at “1” to “0”, max. | 20 ms |
| for interrupt inputs | |
| — parameterizable | No |
| for technological functions | |
| — parameterizable | No |
| Cable length | |
| ● shielded, max. | 1 000 m |
| ● unshielded, max. | 600 m |
Encoder |
|
| Connectable encoders | |
| ● 2-wire sensor | Yes |
| — permissible quiescent current (2-wire sensor), max. | 1.5 mA |
| Isochronous mode | |
| Isochronous operation (application synchronized up to terminal) | No |
| Interrupts/diagnostics/status information | |
| Diagnostics function | Yes |
| Alarms | |
| ● Diagnostic alarm | Yes |
| Diagnostic messages | |
| ● Diagnostic information readable | Yes |
| ● Monitoring the supply voltage | Yes |
| — parameterizable | Yes |
| ● Monitoring of encoder power supply | No |
| ● Wire-break | Yes; Module-by-module, optional protective circuit for preventing wire-break diagnostics in the case of simple encoder contacts: 25 kOhm to 45 kOhm |
| ● Short-circuit | No |
| ● Group error | Yes |
| Diagnostics indication LED |
