Analog Output Module 6ES7135-6HD00-0BA1

Analog Output Module 6ES7135-6HD00-0BA1


تماس بگیرید

دسته بندی : ,

آخرین بروزرسانی : ۵ فروردین, ۱۴۰۳

بررسی اجمالی محصول

SIMATIC ET 200SP, Analog output module, AQ 4XU/I Standard, suitable for BU type A0, A1, Color code CC00, Module diagnostics, 16 bit, +/-0.3%

جهت ارائه خدمات همکاری از قبیل تخفیف همکاری , لیست قیمت و…

خدمات همکاری آی سی اِس شاپـــــــ شامل تامین لوازم و تجهیزات صنعتی (برندهای مطرح دنیا) ، ارائه گارانتی و تعمیر فوری محصولات , مشاوره به همکاران گرامی , ارائه تخفیف همکاری و یا ارسال رایگان محصولات می باشد . (همکاری شمارتو وارد کن تا فرم ثبت نام برات ارسال بشه )

نقد و بررسی : Analog Output Module 6ES7135-6HD00-0BA1

Analog Output Module 6ES7135-6HD00-0BA1

SIMATIC ET 200SP, Analog output module, AQ 4XU/I Standard, suitable for BU type A0, A1, Color code CC00, Module diagnostics, 16 bit, +/-0.3%

SIEMENS

General information

Product type designation AQ 4xU/I ST
HW functional status From FS07
usable BaseUnits BU type A0, A1
Color code for module-specific color identification plate CC00
Product function
● I&M data Yes; I&M0 to I&M3
● Output range scalable No
Engineering with
● STEP 7 TIA Portal configurable/integrated as of version V11 SP2 / V13
● STEP 7 configurable/integrated as of version V5.5 SP3 / –
● PCS 7 configurable/integrated as of version V8.1 SP1
● PROFIBUS as of GSD version/GSD revision One GSD file each, Revision 3 and 5 and higher
● PROFINET as of GSD version/GSD revision GSDML V2.3
Operating mode
● Oversampling No
● MSO No
CiR – Configuration in RUN
Reparameterization possible in RUN Yes
Calibration possible in RUN No
Supply voltage
Rated value (DC) 24 V
permissible range, lower limit (DC) 19.2 V
permissible range, upper limit (DC) 28.8 V
Reverse polarity protection Yes
Input current
Current consumption, max. 150 mA
Power loss
Power loss, typ. 1.5 W
Address area
Address space per module
● Address space per module, max. 8 byte; + 1 byte for QI information
Analog outputs
Number of analog outputs 4
Voltage output, short-circuit current, max. 45 mA
Cycle time (all channels), min. 5 ms
Analog output with oversampling No

Output ranges, voltage

● 0 to 10 V Yes; 15 bit
● 1 V to 5 V Yes; 13 bit
● -5 V to +5 V Yes; 15 bit incl. sign
● -10 V to +10 V Yes; 16 bit incl. sign
Output ranges, current
● 0 to 20 mA Yes; 15 bit
● -20 mA to +20 mA Yes; 16 bit incl. sign
● 4 mA to 20 mA Yes; 14 bit
Connection of actuators
● for voltage output two-wire connection Yes
● for voltage output four-wire connection Yes
● for current output two-wire connection Yes
Load impedance (in rated range of output)
● with voltage outputs, min. 2 kΩ
● with voltage outputs, capacitive load, max. 1 µF
● with current outputs, max. 500 Ω
● with current outputs, inductive load, max. 1 mH
Destruction limits against externally applied voltages and currents
● Voltages at the outputs 30 V
Cable length
● shielded, max. 1 000 m; 200 m for voltage output
Analog value generation for the outputs
Integration and conversion time/resolution per channel
● Resolution with overrange (bit including sign), max. 16 bit
Settling time
● for resistive load 0.1 ms
● for capacitive load 1 ms
● for inductive load 0.5 ms
Errors/accuracies
Linearity error (relative to output range), (+/-) 0.03 %
Temperature error (relative to output range), (+/-) 0.005 %/K
Crosstalk between the outputs, min. -50 dB
Repeat accuracy in steady state at 25 °C (relative to output range), (+/-) 0.05 %

Operational error limit in overall temperature range

● Voltage, relative to output range, (+/-) 0.5 %
● Current, relative to output range, (+/-) 0.5 %
Basic error limit (operational limit at 25 °C)
● Voltage, relative to output range, (+/-) 0.3 %
● Current, relative to output range, (+/-) 0.3 %
Isochronous mode
Isochronous operation (application synchronized up to terminal) No
Interrupts/diagnostics/status information
Diagnostics function Yes
Substitute values connectable Yes
Alarms
● Diagnostic alarm Yes

Diagnostic messages

● Monitoring the supply voltage Yes
● Wire-break Yes
● Short-circuit Yes
● Group error Yes
● Overflow/underflow Yes
Diagnostics indication LED
● Monitoring of the supply voltage (PWR-LED) Yes; Green PWR LED
● Channel status display Yes; Green LED
● for channel diagnostics No
● for module diagnostics Yes; green/red DIAG LED
Potential separation
Potential separation channels
● between the channels  

No
Yes
Yes
● between the channels and backplane bus
● between the channels and the power supply of the electronics
Isolation
Isolation tested with 707 V DC (type test)
Ambient conditions
Ambient temperature during operation
● horizontal installation, min. -30 °C
● horizontal installation, max. 60 °C; Observe derating

-30 °C

● vertical installation, min.
● vertical installation, max. 50 °C; Observe derating
Altitude during operation relating to sea level
● Installation altitude above sea level, max. 2 000 m; On request: Installation altitudes greater than 2 000 m
Dimensions
Width 15 mm
Height 73 mm
Depth 58 mm
Weights
Weight, approx. last modified: 31 g
01/20/2020

Analog Output Module 6ES7135-6HD00-0BA1

Reviews

There are no reviews yet.

Be the first to review “Analog Output Module 6ES7135-6HD00-0BA1”

  • منبع تغذیه 12 ولت 8.5 آمپر مین ول LRS-100-12منبع تغذیه 12 ولت 8.5 آمپر مین ول LRS-100-12

    منبع تغذیه 12 ولت 8.5 آمپر مین ول

    728,000 تومان
    [gravityform id="9" title="true" description="true"] منبع تغذیه 12 ولت 8.5 آمپر مین ول ( LRS-100-12 ) با توان اندازه گیری شدهً 102 وات در خروجی محاسبه شده است. این منبع تغذیه در دسته پاور های کف خواب شرکت مین ول قرا می گیرند. این پاور سوئیچینگ ضخامت کمی در حدود 30 میلی متر دارد.
  • منبع تغذیه 12 ولت 33 آمپر جم

    480,000 تومان
    منبع تغذیه 12 ولت 33 امپر جم با توان نامی 400 وات با بدنه بارونی برای نصب و استفاده در مکان های باز , تابلو برق های صنعتی مورد استفاده برای کاربری های صنعتی , روشنایی . دارای فن پر قدرت برای گردش هوا جهت بالا رفتن عمر قطعات الکترونیکی استفاده شده در این منبع تغذیه جم . نامی آشنا در صنعت روشنایی 
  • فیوز مینیاتوری تک فاز اشنایدر 25-6

    98,000 تومان
    فیوز مینیاتوری تک فاز اشنایدر کاربرد فیوز مینیاتوری اشنایدر عمومی بوده و در مصارف چه خانگی و چه صنعتی مورد استفاده است . فیوز مینیاتوری تک فاز اشنایدر از رنج 6 آمپر تا 25 آمپر تولید و عرضه بازار میشود . به عبارت ساده میتوان گفت که کاربرد فیوز برای حفاظت از دستگاه مصرفی دربرابر اضافه جریانه .
  • منبع تغذیه 12 ولت 17 آمپر مین ول LRS-200-12منبع تغذیه 12 ولت 17 آمپر مین ول LRS-200-12

    منبع تغذیه 12 ولت 17 آمپر مین ول

    1,139,000 تومان
    منبع تغذیه 12 ولت 17 آمپر مین ول (LRS-200-12) با توان و قدرت 204 وات در خروجی انداره گیری شده است. سوئیچینگ مین ول سری LRS-200-12 جزء درسته کف خواب محصولات شرکت مین ول محسوب می شود. این منبع تغذیه توانای تحمل ولتاژ ورودی تا 300 را تا 5ثانیه دارد. راندمان در این منبع تغذیه تا 87.5% اندازه گیری شده است که بسیار بالا و کاربردی می باشد. تلفات در…
  • منبع تغذیه 24 ولت 2.5 امپر مین ول - ای سی اِس شاپ

    منبع تغذیه HDR-60-24 خروجی 24 ولت 2.5 آمپر مین ول

    832,000 تومان
    منبع تغذیه 24 ولت 2.5 آمپر مین ول (HDR-60-24) با توان 60 وات واقعی و تحویلی به مصرف کننده ساخته شده است. این منبع تغذیه جزء محصولات ریلی شرکت مین ول محسوب می شود. پاور 24 ولت مین ول در دسته اقتصادی محصولات این شرکت قرار می گیرد. راندمان این منبع تغذیه به عدد بالای 90% می رسد که در نوع خود بسیار خوب و کارآمد است. تلفات توان در…
  • منبع تغذیه 24 ولت 40 آمپر مین ول tdr-960-24منبع تغذیه 24 ولت 40 آمپر مین ول tdr-960-24

    منبع تغذیه 24 ولت 40 آمپر(ورودی380ولت)مین ول

    17,420,000 تومان
    منبع تغذیه 24 ولت 40 آمپر مین ول با توان اندازه گیری شده 960 وات واقعی در خروجی در اختیار کاربر است. این منبع تغذیه سوئیچینگ در دسته محصولات ریلی این شرکت قرار می گیرد. منبع تغذیه TDR-960-24 توانایی شروع به کار با ولتاژ سه فاز و دو فاز را دارد. راندمان بالا تا 94.5% و مصرف کم توان در حالت بی باری از ویژگی های این محصول به حساب…