Analog Input Module 6ES7134-6JD00-0CA1

Analog Input Module 6ES7134-6JD00-0CA1


تماس بگیرید

بررسی اجمالی محصول

SIMATIC ET 200SP, Analog input module, AI 4xRTD/TC High Feature, suitable for BU type A0, A1, Color code CC00, channel diagnostics, 16 bit, +/-0.1%, 2-/3-/4-wire

جهت ارائه خدمات همکاری از قبیل تخفیف همکاری , لیست قیمت و…

خدمات همکاری آی سی اِس شاپـــــــ شامل تامین لوازم و تجهیزات صنعتی (برندهای مطرح دنیا) ، ارائه گارانتی و تعمیر فوری محصولات , مشاوره به همکاران گرامی , ارائه تخفیف همکاری و یا ارسال رایگان محصولات می باشد . (همکاری شمارتو وارد کن تا فرم ثبت نام برات ارسال بشه )

نقد و بررسی : Analog Input Module 6ES7134-6JD00-0CA1

Analog Input Module 6ES7134-6JD00-0CA1

SIMATIC SIEMENS ET 200SP, Analog input module , AI 4xRTD/TC High Feature, suitable for BU type A0, A1, Color code CC00, channel diagnostics, 16 bit, +/-0.1%, 2-/3-/4-wire

SIEMENS

General information

Product type designation AI 4x RTD/TC 2/3/4-wire HF, PU 1
HW functional status From FS08
Firmware version

● FW update possible

Yes
usable BaseUnits BU type A0, A1
Color code for module-specific color identification plate CC00
Product function
● I&M data Yes; I&M0 to I&M3
● Adjustment of measuring range Yes
Engineering with
● STEP 7 TIA Portal configurable/integrated as of version V14
● STEP 7 configurable/integrated as of version V5.6
● PCS 7 configurable/integrated as of version V8.1 SP1
● PROFIBUS as of GSD version/GSD revision One GSD file each, Revision 3 and 5 and higher
● PROFINET as of GSD version/GSD revision GSDML V2.3
Operating mode
● Oversampling No

No

● MSI
CiR – Configuration in RUN
Reparameterization possible in RUN Yes
Calibration possible in RUN Yes
Supply voltage
Rated value (DC) 24 V
permissible range, lower limit (DC) 19.2 V
permissible range, upper limit (DC) 28.8 V
Reverse polarity protection Yes
Input current
Current consumption, max. 35 mA
Power loss
Power loss, typ. 0.75 W

Address area

Address space per module
● Address space per module, max. 8 byte; + 1 byte for QI information
Hardware configuration
Automatic encoding Yes
● Mechanical coding element Yes
Selection of BaseUnit for connection variants
● 2-wire connection BU type A0, A1
● 3-wire connection BU type A0, A1

Analog inputs

Number of analog inputs 4
permissible input voltage for voltage input (destruction limit), max. 30 V
Cycle time (all channels), min. Sum of the basic conversion times and additional processing times (depending on the parameterization of the active channels); for line compensation in case of a three-wire connection, an additional cycle is necessary
Technical unit for temperature measurement adjustable Yes; °C/°F/K
Input ranges (rated values), voltages
● -1 V to +1 V Yes; 16 bit incl. sign
● Input resistance (-1 V to +1 V) 1 MΩ
● -250 mV to +250 mV Yes; 16 bit incl. sign
● Input resistance (-250 mV to +250 mV) 1 MΩ
● -50 mV to +50 mV Yes; 16 bit incl. sign

1 MΩ

● Input resistance (-50 mV to +50 mV)
● Input resistance (Ni 500) 1 MΩ

Yes; 16 bit incl. sign

● Pt 100
● Input resistance (Pt 100) 1 MΩ
● Pt 1000 Yes; 16 bit incl. sign
● Input resistance (Pt 1000) 1 MΩ
● Pt 200 Yes; 16 bit incl. sign
● Input resistance (Pt 200) 1 MΩ
● Pt 500 Yes; 16 bit incl. sign
● Input resistance (Pt 500) 1 MΩ
Input ranges (rated values), resistors
● 0 to 150 ohms Yes; 15 bit
● Input resistance (0 to 150 ohms) 1 MΩ
● 0 to 300 ohms Yes; 15 bit
● Input resistance (0 to 300 ohms) 1 MΩ
● 0 to 600 ohms Yes; 15 bit
● Input resistance (0 to 600 ohms) 1 MΩ
● 0 to 3000 ohms Yes; 15 bit
● Input resistance (0 to 3000 ohms) 1 MΩ
● 0 to 6000 ohms Yes; 15 bit
● Input resistance (0 to 6000 ohms) 1 MΩ
● PTC Yes; 15 bit
● Input resistance (PTC) 1 MΩ
Thermocouple (TC)
Temperature compensation
— parameterizable Yes
— Reference channel of the module Yes
— internal comparison point Yes; with BaseUnit type A1
— Reference channel of the group Yes
— Number of reference channel groups 4; Group 0 to 3
— fixed reference temperature Yes

Cable length

● shielded, max. 200 m; 50 m with thermocouples
Analog value generation for the inputs
Measurement principle integrating (Sigma-Delta)
Integration and conversion time/resolution per channel
● Resolution with overrange (bit including sign), max. 16 bit
● Integration time, parameterizable Yes
● Basic conversion time, including integration time (ms)
— additional processing time for wire-break check 2 ms; In the ranges resistance thermometers, resistors and thermocouples

2 ms; for 3/4 wire transducer (resistance thermometer and resistor)

— additional power line wire-break check
● Interference voltage suppression for interference frequency f1 in Hz 16.6 / 50 / 60 Hz
● Conversion time (per channel) 180 / 60 / 50 ms
Smoothing of measured values
● Number of smoothing levels 4; None; 4/8/16 times
● parameterizable Yes
Encoder
Connection of signal encoders
● for voltage measurement Yes
● for resistance measurement with two-wire connection Yes
● for resistance measurement with three-wire connection Yes
● for resistance measurement with four-wire connection Yes
Errors/accuracies
Linearity error (relative to input range), (+/-) 0.01 %; ±0.1 % for resistance thermometers and resistance
Temperature error (relative to input range), (+/-) 0.0009 %/K; ±0.005 % / K at thermocouple
Crosstalk between the inputs, min. -50 dB
Repeat accuracy in steady state at 25 °C (relative to input range), (+/-) 0.05 %
Operational error limit in overall temperature range
● Voltage, relative to input range, (+/-) 0.1 %
● Resistance, relative to input range, (+/-) 0.1 %
Basic error limit (operational limit at 25 °C)
● Voltage, relative to input range, (+/-) 0.05 %
● Resistance, relative to input range, (+/-) 0.05 %
Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency
● Series mode interference (peak value of interference < rated value of input range), min. 70 dB
● Common mode voltage, max. 10 V
● Common mode interference, min. 90 dB

Isochronous mode

Isochronous operation (application synchronized up to terminal) No
Interrupts/diagnostics/status information
Diagnostics function Yes
Alarms
● Diagnostic alarm Yes

Yes; two upper and two lower limit values in each case

● Limit value alarm
Diagnostic messages
● Monitoring the supply voltage Yes
● Wire-break Yes; channel by channel
● Group error Yes
● Overflow/underflow Yes; channel by channel
Diagnostics indication LED
● Monitoring of the supply voltage (PWR-LED) Yes; Green PWR LED
● Channel status display Yes; Green LED
● for channel diagnostics Yes; Red LED
● for module diagnostics Yes; green/red DIAG LED
Potential separation
Potential separation channels
● between the channels No
● between the channels and backplane bus Yes
● between the channels and the power supply of the electronics Yes

Isolation

Isolation tested with 707 V DC (type test)
Ambient conditions
Ambient temperature during operation
● horizontal installation, min. -30 °C
● horizontal installation, max. 60 °C
● vertical installation, min. -30 °C
● vertical installation, max. 50 °C
Altitude during operation relating to sea level
● Installation altitude above sea level, max. 5 000 m; Restrictions for installation altitudes > 2 000 m, see manual
Dimensions
Width 15 mm
Height 73 mm
Depth 58 mm
last modified: 01/20/2020

SIEMENS Analog Input Module 6ES7134-6JD00-0CA1

Reviews

There are no reviews yet.

Be the first to review “Analog Input Module 6ES7134-6JD00-0CA1”

  • منبع تغذیه 5 ولت 18 آمپر مین ول

    1,221,000 تومان
    منبع تغذیه 5 ولت 18 آمپر مین ول ( LRS-100-5 ) با توان اندازه گیری شدهً 102 وات در خروجی محاسبه شده است. این منبع تغذیه در دسته پاور های کف خواب شرکت مین ول قرا می گیرند. این پاور سوئیچینگ ضخامت کمی در حدود 30 میلی متر دارد.
  • منبع تغذیه سوئیچینگ 24 ولت 5 آمپر ریلی مین ول (EDR-120-24 meanwell)منبع تغذیه 24 ولت 5 آمپر مین ول (EDR-120-24)

    منبع تغذیه 24 ولت 5 آمپر مین ول

    1,200,000 تومان
    منبع تغذیه 24 ولت 5 آمپر مین ول (EDR-120-24) با توان و قدرت واقعی اندازه گیری شده 120 وات می باشد. سری EDR-120 جزء محصولات ریلی شرکت مین ول محسوب می شود. با توجه به طراحی و کیفیت ساخت بالا این منبع تغذیه راندمان به %87.5 میرسد. از جمله موارد حفاظتی می توان به حفاظت در برابر اتصال کوتاه، اضافه جریان، اضافه ولتاژ و دمای بالا اشاره کرد. به وسیله…
  • ابعاد محصول meanwell ad-55b

    منبع تغذیه و شارژر 24 ولت 2 آمپر مین ول

    2,442,000 تومان
    منبع تغذیه و شارژر 24 ولت 2 آمپر مین ول با توان اندازه گیری شده 53.9 وات در خروجی محاسبه شده است. این محصول در زمان اتصال باتری در کانال اول خروجی جریان معادل 1.8 آمپر و در کانال دوم معادل 0.16 آمپر می باشد. منبع تغذیه  AD-55 با قابلیت UPS از سری منبع تغذیه های مین ول می باشد. راندمان در این شارژر به 74% می رسد که به…
  • درایو 0.4 کیلووات سه فاز آی مستر iMaster

    تماس بگیرید
    درایو U1-IMASTER براساس تکنولوژی شرکت فوجی ( MINI – FRENIC ) توسط شرکت ADT کره جنوبی مونتاژ و در اختیار مشتریان این محصول در کره قرار گرفته است.درایو  0.4 کیلووات سه فاز ایمستر درایوی چند منظوره است که در حال حاضر تا توان 4کیلووات تولید می شود و روانه بازار می شود . و علی رغم جثه کوچک، دارای قابلیت های بسیار زیادی می باشد.
  • منبع تغذیه 12 ولت 10 آمپر

    250,000 تومان
    منبع تغذیه 12 ولت 10 امپر  (S-120-12) با توان خروجی 120 وات تحویلی به مصرف کننده اندازه گیری شده است. این منبع تغذیه دارای ابعاد کوچکی می باشد همین امر باعث می شود فضای کمی را اشغال می کند. ولتاژ ورودی که در این منبع تغذیه قابل قبول است بین 110 ولت تا 220 ولت ac می باشد
  • منبع تغذیه 24 ولت 1.5 آمپر مین ول

    745,000 تومان
    منبع تغذیه 24 ولت 1.5 آمپر مین ول با توان 36 وات در خروجی در اختیار کاربر قرار می گیرد.این سوئیچینگ (LRS-35-24) در دسته ی منبع تغذیه های کف خواب شرکت مین ول قرار می گیرد.راندمان یا بازدهی در این منبع تغذیه به عدد بالای 86 درصد می رسد. که بسیار کارآمد می باشد.تلفات در این منبع تغذیه بسیار کم بوده به طوری که در حالت بی باری به کمتر…