نقد و بررسی : Analog Input Module 6ES7134-6GF00-0AA1
Analog Input Module 6ES7134-6GF00-0AA1
SIMATIC ET 200SP, Analog Input Module , AI 8XI 2-/4-wire Basic, suitable for BU type A0, A1, Color code CC01, Module diagnostics, 16 bit
SIEMENS | |
General information |
|
Product type designation | AI 8xI 2-/4-wire BA |
HW functional status | from FS04 |
Firmware version
● FW update possible |
Yes |
usable BaseUnits | BU type A0, A1 |
Color code for module-specific color identification plate | CC01 |
Product function | |
● I&M data | Yes; I&M0 to I&M3 |
● Measuring range scalable | No |
Engineering with | |
● STEP 7 TIA Portal configurable/integrated as of version | V13 SP1 |
● STEP 7 configurable/integrated as of version | V5.5 SP3 / – |
● PROFIBUS as of GSD version/GSD revision | GSD Revision 5 |
● PROFINET as of GSD version/GSD revision | GSDML V2.3 |
Operating mode | |
● Oversampling | No |
● MSI | No |
CiR – Configuration in RUN | |
Reparameterization possible in RUN | Yes |
Calibration possible in RUN | No |
Supply voltage | |
Rated value (DC) | 24 V |
permissible range, lower limit (DC) | 19.2 V |
permissible range, upper limit (DC) | 28.8 V |
Reverse polarity protection | Yes |
Input current |
|
Current consumption, max. | 25 mA; without sensor supply |
Encoder supply | |
24 V encoder supply | |
● 24 V | Yes |
● Short-circuit protection | Yes |
● Output current, max. | 0.7 A; total current of all encoders/channels |
Power loss | |
Power loss, typ. | 0.7 W; Without encoder supply voltage |
Address area | |
Address space per module | |
● Address space per module, max. | 16 byte |
Hardware configuration | |
Automatic encoding | |
● Mechanical coding element | Yes |
Selection of BaseUnit for connection variants | |
● 1-wire connection | BU type A0, A1 |
● 2-wire connection | BU type A0, A1 |
● 4-wire connection | BU type A0, A1 + potential distributor module |
Analog inputs | |
Number of analog inputs | 8; Single-ended |
● For current measurement | 8 |
permissible input current for current input (destruction limit), max. | 50 mA |
Cycle time (all channels), min. | 1 ms; per channel |
Input ranges (rated values), currents | |
● 0 to 20 mA | Yes |
● Input resistance (0 to 20 mA) | 100 Ω; 15 bit |
● -20 mA to +20 mA | Yes |
● Input resistance (-20 mA to +20 mA) | 100 Ω; 16 bit incl. sign |
● 4 mA to 20 mA | Yes
100 Ω; 15 bit |
● Input resistance (4 mA to 20 mA) | |
Cable length | |
● shielded, max. | 200 m |
Analog value generation for the inputs | |
Integration and conversion time/resolution per channel | |
● Resolution with overrange (bit including sign), max. | 16 bit |
● Integration time, parameterizable | Yes |
● Interference voltage suppression for interference frequency f1 in Hz | 16.67 / 50 / 60 / 4 800 (16.67 / 50 / 60) |
● Conversion time (per channel) | 180 / 60 / 50 / 0.625 (67.5 / 22.5 / 18.75) ms |
Smoothing of measured values | |
● Number of smoothing levels | 4; None; 4/8/16 times |
● parameterizable | Yes |
Encoder |
|
Connection of signal encoders | |
● for voltage measurement | No |
● for current measurement as 2-wire transducer | Yes |
— Burden of 2-wire transmitter, max. | 650 Ω |
● for current measurement as 4-wire transducer | Yes |
Errors/accuracies | |
Linearity error (relative to input range), (+/-) | 0.01 % |
Temperature error (relative to input range), (+/-) | 0.005 %/K |
Crosstalk between the inputs, min. | 50 dB |
Repeat accuracy in steady state at 25 °C (relative to input range), (+/-) | 0.05 % |
Operational error limit in overall temperature range | |
● Current, relative to input range, (+/-) | 0.5 % |
Basic error limit (operational limit at 25 °C) | |
● Current, relative to input range, (+/-) | 0.3 % |
Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency | |
● Series mode interference (peak value of interference < rated value of input range), min. | 70 dB; With conversion time 67.5 / 22.5 / 18.75 ms: 40 dB |
Isochronous mode | |
Isochronous operation (application synchronized up to terminal) | No |
Interrupts/diagnostics/status information | |
Diagnostics function | Yes |
Alarms | |
● Diagnostic alarm | Yes |
● Limit value alarm | No |
Diagnostic messages | |
● Monitoring the supply voltage | Yes |
● Wire-break | Yes; at 4 to 20 mA |
● Short-circuit | Yes; Sensor supply to M; module by module |
● Group error | Yes |
● Overflow/underflow | Yes |
Diagnostics indication LED | |
● Monitoring of the supply voltage (PWR-LED) | Yes; Green LED |
● Channel status display | Yes; Green LED |
● for channel diagnostics | No |
● for module diagnostics | Yes; green/red DIAG LED |
Potential separation | |
Potential separation channels | |
● between the channels | No |
● between the channels and backplane bus | Yes |
● between the channels and the power supply of the electronics | No |
Isolation |
|
Isolation tested with | 707 V DC (type test) |
Ambient conditions | |
Ambient temperature during operation | |
● horizontal installation, min. | -30 °C |
● horizontal installation, max. | 60 °C |
● vertical installation, min. | -30 °C |
● vertical installation, max. | 50 °C |
Altitude during operation relating to sea level | |
● Installation altitude above sea level, max. | 5 000 m; Restrictions for installation altitudes > 2 000 m, see manual |
Dimensions | |
Width | 15 mm |
Height | 73 mm |
Depth | 58 mm |
Weights | |
Weight, approx. | 31 g |
last modified: | 01/20/2020 |
SIEMENS Analog Input Module 6ES7134-6GF00-0AA1
Be the first to review “Analog Input Module 6ES7134-6GF00-0AA1”
-
مبدل 110 به 24 ولت 6.3 آمپر مین ول
3,358,000 تومانکانورتر 24 ولت 6.3 آمپر مین ول با توان و قدرت 151.2 وات واقعی در خروجی اندازه گیری شده است. این مبدل DC به DC در دسته کانورتر های کف خواب این شرکت تایوانی قرار می گیرد. راندمان در این منبع تغذیه DC به DC تا عدد بالای 82 در صد می رسد که در صنعت بسیار کاربردی ست. محافظت در برابر اتصال کوتاه، اضافه بار، ولتاژ بالا و درجه… -
منبع تغذیه 24 ولت 20 آمپر
1,250,000 تومانمنبع تغذیه 24 ولت 20 امپر (S-480-24) با توان خروجی 480 وات تحویلی به مصرف کننده اندازه گیری شده است. ولتاژ ورودی که در این منبع تغذیه قابل قبول است 220 ولت ac می باشد این دستگاه الکترونیک توانایی تبدیل ولتاژی به ولتاژ دیگری را دارد. -
مبدل 24 به 48 ولت 4.2 آمپر مین ول
5,617,000 تومانکانورتر 48 ولت 4.2 آمپر مین ول با توان و قدرت 201.6 وات در خروجی اندازه گیری شده است. این محصول از مبدل های DC به DC سری کف خواب شرکت مین ول محسوب می شود. ولتاژ ورودی این منبع تغذیه بازه ی 19 تا 36 ولت می باشد و یا به صورت استاندار 24ولت است. راندمان در این منبع تغذیه DC به DC تا عدد بالای 86 در صد… -
منبع تغذیه 24 ولت 20 آمپر(ورودی380ولت) مین ول
9,224,000 تومانمنبع تغذیه 24 ولت 20 آمپر مین ول با توان اندازه گیری شده 480 وات واقعی در خروجی در اختیار کاربر است. این منبع تغذیه سوئیچینگ در دسته محصولات ریلی این شرکت قرار می گیرد. منبع تغذیه TDR-480-24 توانایی شروع به کار با ولتاژ سه فاز و دو فاز را دارد. راندمان بالا تا 93% و مصرف کم توان در حالت بی باری از ویژگی های این محصول به حساب… -
منبع تغذیه 12 ولت 20 آمپر
310,000 تومانمنبع تغذیه 12 ولت 20 امپر (S-240-12) با توان خروجی 240وات تحویلی به مصرف کننده اندازه گیری شده است. ولتاژ ورودی که در این منبع تغذیه قابل قبول است بین 110 ولت تا 220 ولت ac می باشد این دستگاه الکترونیک توانایی تبدیل ولتاژی به ولتاژ دیگری را دارد. -
منبع تغذیه 24 ولت 20 آمپر مین ول
12,698,000 تومانمنبع تغذیه 24 ولت 20 آمپر مین ول جزء سری ریلی این شرکت محسوب می شود. توان خروجی 480 وات اندازه گیری شده که در اختیار کاربر قرار می گیرد. این منبع تغذیه بر روی ریل DIN TS-3.5 یا DIN TS-15 نصب می شود. این سری از محصولات مین ول دارای سیستم اصلاح ضریب قدرت (PFC) می باشد. راندمان کاری این منبع تغذیه را به 93% به میرسد که در…
Reviews
There are no reviews yet.