- لطفا گزینههای محصول را انتخاب کنید پی ال سی لوگو LOGO 8 SIEMENS.
Digital Output Module 6ES7132-6BH00-0BA0
تماس بگیرید
بررسی اجمالی محصول
*** Spare part *** SIMATIC ET 200SP, Digital Output Module , DQ 16x 24VDC/0.5A Standard, suitable for BU type A0, Color code CC00, module diagnostics
نقد و بررسی : Digital Output Module 6ES7132-6BH00-0BA0
Digital Output Module 6ES7132-6BH00-0BA0
*** Spare part *** SIMATIC ET 200SP, Digital Output Module , DQ 16x 24VDC/0.5A Standard, suitable for BU type A0, Color code CC00, module diagnostics
SIEMENS | |||
General information |
|||
Product type designation | DQ 16×24 VDC/0.5 A ST | ||
Firmware version
● FW update possible |
V1.0 | ||
Yes | |||
usable BaseUnits | BU type A0 | ||
Color code for module-specific color identification plate | CC00 | ||
Product function | |||
● I&M data | Yes; I&M0 to I&M3 | ||
Engineering with | |||
● STEP 7 TIA Portal configurable/integrated as of version | V11 SP2 / V13 | ||
● STEP 7 configurable/integrated as of version | V5.5 SP3 / –
|
||
● PCS 7 configurable/integrated as of version | |||
● PROFIBUS as of GSD version/GSD revision | |||
● PROFINET as of GSD version/GSD revision | GSDML V2.3 | ||
Operating mode | |||
● DQ | Yes | ||
● DQ with energy-saving function | No |
● PWM | No
No |
● Oversampling | |
● MSO | No |
Redundancy | |
● Redundancy capability | Yes |
Supply voltage | |
Rated value (DC) | 24 V |
permissible range, lower limit (DC) | 19.2 V |
permissible range, upper limit (DC) | 28.8 V |
Reverse polarity protection | Yes |
Input current |
|
Current consumption, max. | 60 mA; without load |
Output voltage | |
Rated value (DC) | 24 V |
Power loss | |
Power loss, typ. | 1 W |
Address area | |
Address space per module | |
● Address space per module, max. | 2 byte |
Hardware configuration | |
Automatic encoding | |
● Mechanical coding element | Yes |
Selection of BaseUnit for connection variants | |
● 1-wire connection | BU type A0 |
● 2-wire connection | BU type A0 + Potential isolation module |
● 3-wire connection | BU type A0 + Potential isolation module |
● 4-wire connection | BU type A0 + Potential isolation module |
Digital outputs | |
Type of digital output | Source output (PNP, current-sourcing) |
Number of digital outputs | 16 |
Current-sinking | No |
Current-sourcing | Yes |
Digital outputs, parameterizable | Yes |
Short-circuit protection | Yes |
● Response threshold, typ. | 0.7 to 1.3 A |
Limitation of inductive shutdown voltage to | Typ. L+ (-50 V) |
Controlling a digital input | Yes |
Switching capacity of the outputs |
|
● with resistive load, max. | 0.5 A |
● on lamp load, max. | 5 W |
Load resistance range | |
● lower limit | 48 Ω |
● upper limit | 12 kΩ |
Output current | |
● for signal “1” rated value | 0.5 A |
● for signal “0” residual current, max. | 0.1 mA |
Output delay with resistive load | |
● “0” to “1”, typ. | 50 µs |
● “1” to “0”, typ. | 100 µs |
Parallel switching of two outputs | |
● for uprating | No |
● for redundant control of a load | Yes |
Switching frequency | |
● with resistive load, max. | 100 Hz |
● with inductive load, max. | 2 Hz |
● on lamp load, max. | 10 Hz |
Total current of the outputs | |
● Current per channel, max. | 0.5 A |
● Current per module, max. | 8 A |
Total current of the outputs (per module) | |
horizontal installation | |
— up to 30 °C, max. | 8 A |
— up to 40 °C, max. | 8 A |
— up to 50 °C, max. | 6 A |
— up to 60 °C, max. | 4 A |
vertical installation | |
— up to 30 °C, max. | 8 A |
— up to 40 °C, max. | 6 A |
— up to 50 °C, max. | 4 A |
— up to 60 °C, max. | 4 A |
Cable length | |
● shielded, max. | 1 000 m |
● unshielded, max. | 600 m |
Isochronous mode | |
Isochronous operation (application synchronized up to terminal) | No |
Interrupts/diagnostics/status information | |
Diagnostics function | Yes |
Substitute values connectable | Yes |
Alarms | |
● Diagnostic alarm | Yes |
Diagnostic messages | |
● Monitoring the supply voltage | Yes |
● Wire-break | Yes; Module-wise |
● Short-circuit to M | Yes; Module-wise |
● Short-circuit to L+ | Yes; Module-wise |
● Group error | Yes |
Diagnostics indication LED |
|
● Monitoring of the supply voltage (PWR-LED) | Yes; Green PWR LED |
● Channel status display | Yes; Green LED |
● for channel diagnostics | No |
● for module diagnostics | Yes; green/red DIAG LED |
Potential separation | |
Potential separation channels | |
● between the channels | No |
● between the channels and backplane bus | Yes |
● between the channels and the power supply of the electronics | No |
Isolation | |
Isolation tested with | 707 V DC (type test) |
Standards, approvals, certificates | |
Suitable for safety functions | No |
Suitable for safety-related tripping of standard modules | Yes; From FS03 |
Highest safety class achievable in safety mode | |
● Performance level according to ISO 13849-1 | PL d |
● SIL acc. to IEC 61508 | SIL 2 |
Ambient conditions | |
Ambient temperature during operation | |
● horizontal installation, min. | 0 °C |
● horizontal installation, max. | 60 °C |
● vertical installation, min. | 0 °C; in all other mounting positions |
● vertical installation, max. | 50 °C; in all other mounting positions |
Altitude during operation relating to sea level | |
● Ambient air temperature-barometric pressurealtitude | On request: Negative ambient temperature down to -30 °C
(without condensation), installation altitudes between 2 000 m and 5 000 m |
Dimensions | |
Width | 15 mm |
Height | 73 mm |
Depth | 58 mm |
SIEMENS Digital Output Module 6ES7132-6BH00-0BA0 |
Be the first to review “Digital Output Module 6ES7132-6BH00-0BA0”
-
مبدل 24 به 12 ولت 8.5 آمپر مین ول
2,380,000 تومانکانورتر 12 ولت 8.5 آمپر مین ول (SD-100B-12) با توان و قدرت 102 وات در خروجی اندازه گیری شده است. این کانورتر در دسته مبدل های DC به DC کف خواب شرکت مین ول قرار می گیرد. ولتاژ ورودی این کانورتر در بازه ی 19 ولت تا 36 ولت می باشد و یا به صورت استاندار 24 ولت است. محافظت در برابر اتصال کوتاه، اضافه بار، ولتاژ بالا و درجه… -
منبع تغذیه 24 ولت 1 آمپر مین ول
950,000 تومانمنبع تغذیه 24 ولت 1 آمپر مین ول (MDR-20-24) در مجموع با 24 وات واقعی در خروجی اندازه گیری شده است. سری MDR 20 در دسته محصولات ریلی شرکت مین ول قرار می گیرند. راندمان خروجی این سری از محصولات مین ول یعنی MDR-20-24 تا 84% افزایش می یابد. تلفات در این منبع تغذیه بسیار کم هستند به طوری که در حالت بی باری کمتر از 0.75 وات می باشد.… -
منبع تغذیه 48 ولت 2.5 آمپر مین ول
1,808,000 تومانمنبع تغذیه 48 ولت 2.5 آمپر مین ول (EDR 120 48) با توان و قدرت واقعی اندازه گیری شده 120 وات می باشد. این سری جزء محصولات ریلی این شرکت محسوب می شود. این منبع تغذیه بر روی ریل های استاندار TS-35 / 7.5 یا TS-35 / 15 قرار می گیرد. -
مبدل 24 به 24 ولت 4.2 آمپر مین ول
2,380,000 تومانکانورتر 24 ولت 4.2 آمپر (SD-100B-24) مین ول با توان و قدرت 100.8 وات در خروجی اندازه گیری شده است. این کانورتر در دسته مبدل های DC به DC کف خواب شرکت مین ول قرار می گیرد. راندمان این منبع تغذیه (SD-100B-24) تا 78 در صد افزایش پیدا می کند که این مقدار پاسخگو نیاز کاربر می باشد. این مبدل DC به DC (کانورتر) در فیلتر EMI ساخته شده است.… -
منبع تغذیه 24 ولت 1 آمپر ریلی
450,000 تومانمنبع تغذیه 24 ولت 1 آمپر وی وی (MDR-20-24) در مجموع با 20 وات در خروجی می باشد . این منبع تغذیه قابلیت نصب بر روی ریل های DIN TS-35/7.5 یا DIN TS-35/15 را دارد.این پاور سوئیچینگ دارای تست صد در صد سلامت می باشد. -
منبع تغذیه 24 ولت 14.6 آمپر مین ول
1,347,000 تومانمنبع تغذیه 24 ولت 14.6 آمپر مین ول (LRS-350-24) با توان اندازه گیری شده 350.4 وات در خروجی محاسبه شده است. این منبع تغذیه در دسته پاور های کف خواب شرکت مین ول قرا می گیرند. راندمان در منبع تغذیه 24 ولت 14.6 آمپر به 88% می رسد که به راحتی پاسخگوی نیاز کاربران است. تلفات در این منبع تغذیه بسیار کم بوده به طوری که در زمان بی باری…
Reviews
There are no reviews yet.